米制六角头全螺纹螺钉 NAS NAM 51474 (DS 51474) - 2011
| 选择规格尺寸 点击↓ M3 ×0.5 M4 ×0.7 M5 ×0.8 M6 ×1 M8 ×1.25 M10 ×1.5 M10 ×1.5 M12 ×1.75 M16 ×2 M20 ×2.5 M24 ×3 M30 ×3.5 M36 ×4 |
尺寸单位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ①,螺纹：标准粗牙螺距公差等级 6g，符合 FED-STD-H28/21。 螺纹的可接受性应符合 FED-STD-H28/20 system 21。 ②,3 和 4 毫米直径的螺钉不应有锁线孔。 “h”尺寸应为“k”尺寸的 1/2。 指定时，钻头孔如下： 对于 5 毫米直径 - 在六边形平面中心 0.3 毫米范围内钻三个 90° X 1 毫米最小直径的沉头孔。 对于 6 和 8 毫米直径 - 在六角平面中心 0.3 毫米处钻三个沉孔，90° X 1.4 毫米最小直径。 对于 10 毫米和更大的直径 - 在 0.3 毫米的六角平面中心内钻三个 90° X 1.6 毫米最小直径的沉头孔。 ③,尺寸和公差符合 ANSI Y14.5M-1982。 ④,此尺寸不是 ISO 标准，除非特别订购宽度为 15 mm 的 M10 螺钉，否则应提供宽度为 16 mm 的 M10 螺钉。 |
类似标准及供货信息
| 1 |
|
[国标] GB /T 32.1 - 2020 |
六角头头部带孔螺栓 Hexagon Bolts With Wire Holes On Head 供应商(8) |
| 2 |
|
[国标] GB /T 32.3 - 2020 |
六角头头部带孔螺栓 细牙 Hexagon Bolts With Wire Holes On Head - Fine Pitch Thread 供应商(1) |
| 3 |
|
[国标] GB 32.1 - 1988 |
六角头头部带孔螺栓 A和B级 Hexagon Bolts With Wire Hole On Head-Product Grade A and B 供应商(8) |
| 4 |
|
[国标] GB 32.2 - 1988 |
细杆 B级 六角头头部带孔螺栓 Hexagon Bolts With Wire Holes On Head - Reduced Shank - Product Grade B 供应商(1) |
| 5 |
|
[国标] GB 32.3 - 1988 |
六角头头部带孔螺栓 细牙 A和B级 Hexagon Bolts With Wire Holes On Head-fine Pitch Thread-product Grade A And B 供应商(1) |
| 6 |
|
[国标] GB 25 - 1976 |
小六角头部带孔螺栓 Bolts, Small Hexagon Head With Holes Through The Head 供应商(1) |
| 7 |
|
[国标] GB 26 - 1976 |
小六角头头部带孔导颈螺栓 Bolts, Small Hexagon Head With Fit Neck And Holes Through The Head |
| 8 |
|
[汽标代号] Q 170 |
六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 9 |
|
[汽标代号] Q 170B |
六角头头部带孔螺栓 [粗牙普通螺纹] Hexagon bolts with wire hole on head |
| 10 |
|
[汽标代号] Q 171 |
细牙六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 11 |
|
[汽标代号] Q 171B |
六角头头部带孔螺栓 [细牙普通螺纹] Hexagon bolts with wire hole on head |
| 12 |
|
[汽标代号] Q 171C |
六角头头部带孔螺栓 [较细牙普通螺纹] Hexagon bolts with wire hole on head |
| 13 |
|
[欧标] EN 2887 - 1995 |
航空航天 - 六角头螺栓 全螺纹 耐腐蚀钢 钝化 级别：600MPa (环境温度)/425℃ Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| 14 |
|
[铁道部] TB /T 1479 - 1991 |
轨道车辆车轴轴端螺栓 |
| 15 |
|
[俄标] GOST 7796 (-3) - 1970 |
头部带孔六角头螺栓 3型 Hexagon Reduced Head Bolts Product Grade B, Type 3 |
| 16 |
|
[俄标] GOST 7798 - 1970 |
六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 17 |
|
[俄标] GOST 7805 (-3) - 1970 |
六角头头部带孔螺栓 3型 Hexagon Bolts With Wire Holes On Head, product grade A, Type 3 |
| 18 |
|
[航天] QJ 2365 - 1992 |
六角头头部带孔螺栓 Hexagon head bolts with hole |
| 19 |
|
[中国兵器工业总公司部标准] WJ 2215 - 1994 |
六角头头部带孔全螺纹螺栓 Hexagon Bolts With Wire Holes On Head - Full Thread |