会员中心 | English

自锁托板螺母 DIN 65242 - 2015

选择规格尺寸点击↓

MJ3 ×0.5-4H6H

MJ4 ×0.7-4H6H

MJ5 ×0.8-4H6H

MJ6 ×1-4H5H

MJ8 ×1-4H5H

MJ10 ×1.25-4H5H

尺寸单位: mm

德标DIN 65242 - 2015 DIN65242 65242DIN 自锁托板螺母

扫一扫分享

公差

千件重及价格计算千件重 : kg x 元/kg = 元/千件

默认密度 g/cm³

螺纹尺寸
d

MJ3
×0.5-4H6H

MJ4
×0.7-4H6H

MJ5
×0.8-4H6H

MJ6
×1-4H5H

MJ8
×1-4H5H

MJ10
×1.25-4H5H

代号
a	最大值
b	最大值
c	不带帽
	带帽
d₂	最小值
d₃	最大值
d₄
d₅	±0.25
d₆	最大值
d₇	最小值
e
f
h₁
h₂
h₃
h₄
r
s
t
y
千件重kg	不带帽
	带帽

03	04	05	06	08	10
23.2	23.2	25.2	29.2	29.2	35.2
11	11	11	13.5	16	18
0.5	0.5	0.7	0.7	0.75	0.75
/	0.45	0.45	0.45	0.45	/
/	4.4	5.5	6.5	8.5	10.5
5.2	6.2	7.3	8.7	10.9	12.9
2.5	2.5	2.5	2.5	3	3.5
4.8	4.8	4.8	4.8	5.7	6.6
/	6.6	7.9	9.2	12.8	/
4.5	5.5	6.6	7.5	9.5	11.5
8.5	8.5	9.5	11	11	13
17	17	19	22	22	26
4	5.8	6.9	8.1	9.9	12
4.5	4.5	4.5	4.6	5.5	6
/	11	11.4	12.7	15	/
/	13	13.4	14.7	18	/
3	3	3	3.5	3.5	4.5
0.8	0.8	0.8	0.8	1	1
/	2.2	2.4	2.7	2.7	3
0.15	0.15	0.15	0.18	0.2	0.23
1.7	2.01	2.31	3.82	7.35	10.06
/	2.57	2.97	4.68	9.21	/

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 3103.1 - 2002

紧固件公差（螺栓、螺柱、螺钉和螺母）

GB 3103.2 - 1982

紧固件公差 - 用于精密机械的螺栓、螺钉和螺母

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB 929 - 1988	单耳托板自锁螺母 Self-Locking Nuts, Singlelug, Anchor 供应商(2)
2	[国标] GB 931 - 1988	角形托板自锁螺母 Self-locking Nut, Angle, Anchor 供应商(1)
3	[国标] GB 1340 - 1988	成组游动托板自锁螺母支架 Supports for Self-locking Nuts, Anchor, Floating, Gang Channel
4	[国标] GB 927 - 1988	球面六角自锁螺母 Self-locking Nuts, Hexagon Sphere
5	[国标] GB /T 932 - 1988	气密单耳托板自锁螺母 Self-locking, Singlelug, Anchor, Sealing
6	[国标] GB 933 - 1988	气密双耳托板自锁螺母 Self-locking Nuts, TwoLug, Angchor, Sealing
7	[国标] GB 937 - 1988	成组游动托板自锁螺母 Self-Locking Nuts, Angchor, Floating, Gang Channel
8	[国标] GB 938 - 1988	游动自锁螺母 Self-Locking Nuts, Floating
9	[国标] GB 939 - 1988	单耳托板自锁螺母保护罩 Boots For Self-locking Nuts, Singlelug, Anchor
10	[国标] GB 940 - 1988	双耳托板自锁螺母保护罩 Boots for Self-Locking Nuts, Twolug, Anchor
11	[国标] GB 941 - 1988	角形托板自锁螺母保护罩 Boots for Self-locking Nuts, Angle, Anchor
12	[国标] GB 1340 - 1977	成组游动托板自锁螺母支架 Supports for Self-locking Nuts, Anchor, Floating, Gang Channel
13	[德标] DIN 987 - 1960	自锁钢芯板螺母 Plate Nuts with Steel Core, Self-locking
14	[德标] DIN EN 4123 - 2018	航空航天耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母 Aerospace Series - Shank Nuts , Self-locking , In Heat Resisting Nickel Base Alloy NI-PH2601 (Inconel 718 ) , Silver. Plated on Thread - Classification: 1550 Mpa ( At Ambient Temperature ) / 600℃
15	[汽标] QC /T 1103 - 2019	12角头耐热锁紧螺母 12-Point Head Heat Resistant Nuts
16	[军标] GJB 134.1 - 1986	抗剪型高锁螺母 Hi-lock Nuts, Shear
17	[美国军标] MS 51865 - 1970	六角盖形自锁螺母, 250°F Nut, Self-Locking, Cap-General Purpose, 250°F
18	[航天] QJ 3079.2 (A) - 2011	全金属自锁螺母-六角螺母
19	[航天] QJ 3243.1 - 2005	GH2132 六角自锁螺母 GH2132 Hexagonal Self-locking Nuts
20	[航天] QJ 3243.2 - 2005	GH2132 双六角自锁螺母 GH2132 Bihexagonal Self-locking Nuts
21	[航天] QJ 3243.3 - 2005	GH4738 双六角自锁螺母 GH4738 Bihexagonal Self-locking Nuts
22	[航天] QJ 3078.6 - 1998	尼龙圈自锁螺母双耳托板螺母
23	[航天] QJ 3078.7 - 1998	尼龙圈自锁螺母单耳托板螺母
24	[航天] QJ 3078.8 - 1998	尼龙圈自锁螺母游动双耳托板螺母
25	[航天] QJ 3078.9 - 1998	尼龙圈自锁螺母游动方螺母
26	[航天] QJ 3079.2 - 1998	全金属自锁螺母-六角螺母
27	[航空] HB 8383 - 2013	GH4738 MJ螺纹十二角自锁螺母 Self-locking Nuts, Double, Hexagon, MJ Thread, GH4738 供应商(2)
28	[航空] HB 5634 - 1987	六角压扁自锁螺母（最高工作温度650℃）供应商(1)
29	[航空] HB 5638 - 1987	六角压扁自锁螺母最高工作温度230℃ 供应商(1)
30	[航空] HB 1- 805 - 1976	单耳游动托板自锁螺母供应商(1)
31	[航空] HB 1- 808 - 1976	双耳游动托板自锁螺母供应商(1)
32	[航空] HB 6508 - 2005	抗剪型MJ螺纹高锁螺母 Hi-lock, Shear, with MJ Thread
33	[航空] HB 8051 - 2002	MJ螺纹压装配自锁螺母 Nuts, Insert, Self-Locking, with MJ Thread
34	[航空] HB 8058 - 2002	MJ螺纹双耳托板自锁螺母 Self-locking, Two Lug Anchor Nuts, with MJ Thread
35	[航空] HB 1 801 - 1983	六角自锁螺母
36	[航空] HB 962 - 2001	铸造铝合金 Aluminum Alloy Casting
37	[浙江制造团体标准] T/ZZB 1842 - 2020	轨道交通用偏心式自锁防松螺母 Eccentric Selflocking Antiloosing for Rail Transit