复合槽圆柱头螺钉和瓦形垫圈组合件 JB /T 14724 - 2024
|
|||||||||||||||||||||||||||||
|
|
同版本产品组
技术条件和引用标准
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 9074.1 - 2018 |
螺栓或螺钉和平垫圈组合件 Bolt or Screw and Washer Assemblies with Plain Washers 供应商(7) |
| 2 |
|
[国标] GB /T 9074.5 - 2004 |
十字槽小盘头螺钉和平垫圈组合件 Cross Recessed Small Pan Head Screw and Washer Assemblies with Plain Washers 供应商(2) |
| 3 |
|
[国标] GB /T 9074.1 - 2002 |
螺栓或螺钉和平垫圈组合件 Bolt or Screw and Washer Assemblies with Plain Washers 供应商(7) |
| 4 |
|
[国标] GB /T 9074.1 - 1988 |
十字槽盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws and Plain Washers Assemblies 供应商(7) |
| 5 |
|
[国标] GB 9074.2 - 1988 |
十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供应商(1) |
| 6 |
|
[国标] GB 9074.3 - 1988 |
十字槽盘头螺钉和弹簧垫圈组合件 Cross Recessed Pan Head Screws and Single Coil Spring Lock Washers Assemblies 供应商(3) |
| 7 |
|
[国标] GB 9074.4 - 1988 |
十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross Recessed Pan Head Screws, Single Coil Spring Lock Washer and Plain Washers Assemblies 供应商(12) |
| 8 |
|
[国标] GB /T 9074.5 - 1988 |
十字槽小盘头螺钉和平垫组合 Cross Recessed Small Pan Head Screw and Plain Washer Assemblies 供应商(2) |
| 9 |
|
[国标] GB /T 9074.6 - 1988 |
十字槽小盘头螺钉和大平垫组合 Cross Recessed Small Pan Head Screw and Large Plain Washer Assemblies 供应商(2) |
| 10 |
|
[国标] GB 9074.7 - 1988 |
十字槽小盘头螺钉和弹簧垫圈组合件 Cross Recessed Small Pan Head Screw and Single Coil Spring Lock Washer Assemblies 供应商(2) |
| 11 |
|
[国标] GB 9074.8 - 1988 |
十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件 Cross Recessed Small Pan Head Screw, Single Coil Spring Lock Washer and Plain Washer Assemblies 供应商(11) |
| 12 |
|
[国标] GB 9074.9 - 1988 |
十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross Recessed Countersunk Head Screw and Countersunk Serrated External Toothed Lock Washer Assemblies 供应商(1) |
| 13 |
|
[国标] GB /T 9074.1 (S11) |
内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供应商(1) |
| 14 |
|
[国标] GB /T 9074.32 - 2017 |
螺栓或螺钉和锥形弹性垫圈组合件 Bolt or Screw and Washer Assemblies with Conical Spring Washers |
| 15 |
|
[国标] GB /T 9160.2 (MS) - 2017 |
滚动轴承附件 - 锁紧卡 MS系列 Rolling Bearing - Locking Clips - MS Series |
| 16 |
|
[国标] GB /T 9160.2 (MSL) - 2017 |
滚动轴承附件 - 锁紧卡 MSL系列 Rolling Bearing - Locking Clips - MSL Series |
| 17 |
|
[国标] GB /T 9160.2 (MSL) - 2006 |
滚动轴承附件 - 锁紧卡 MSL系列 Rolling Bearing - Locking Clips - MSL Series |
| 18 |
|
[国标] GB 9074.10 - 1988 |
十字槽半沉头螺钉和锥形锁紧垫圈组合 Cross Recessed Raised Countersunk Head Screw and Countersunk External Toothed Lock Washer Assemblies |
| 19 |
|
[国标] GB /T 9074.1 (S3) |
十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers |
| 20 |
|
[国标] GB /T 9074.1 (S4) |
内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers |
| 21 |
|
[国标] GB /T 9074.1 (S5) |
开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers |
| 22 |
|
[国标] GB /T 9074.1 (S6) |
开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers |
| 23 |
|
[国标] GB /T 9074.1 (S10) |
内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers |
| 24 |
|
[国标] GB /T 9074.1 (S12) |
六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers |
| 25 |
|
[国标] GB /T 9074.1 (S13) |
六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread) and Washer Assemblies with Plain Washers |
| 26 |
|
[德标] DIN 6900-1 - 1990 |
十字盘头螺钉和平垫圈的组合螺钉 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供应商(1) |
| 27 |
|
[德标] DIN 6900-5 - 2004 |
锥形弹性垫圈与螺钉组合件 Assemblies with Coarse Threaded Screws and Captive Conical Spring Washer |
| 28 |
|
[德标] DIN 6304 (E) - 2002 |
带固定旋杆的卡式螺栓 E型 Tommy Screws with Fixed Clamping Bolt - Form E |
| 29 |
|
[德标] DIN 6304 (F) - 2002 |
带固定旋杆的卡式螺栓 F型 Tommy Screws with Fixed Clamping Bolt - Form F |
| 30 |
|
[德标] DIN 6306 (D) - 2002 |
带移动卡式螺栓的定位销钉 D型 Tommy Screws with Moveable Clamping Bolt - Type D |
| 31 |
|
[德标] DIN 6306 (E) - 2002 |
带移动卡式螺栓的定位销钉 E型 Tommy Screws with Moveable Clamping Bolt - Type E |
| 32 |
|
[德标] DIN 6900-2 - 1990 |
开槽螺钉和波形垫圈组合 Slotted Screws and Wave Washers Assemblies |
| 33 |
|
[德标] DIN 6900-3 - 1990 |
鞍形弹簧垫圈与螺钉组合件 Screw and Washer Assemblies with Coarse Thread with Curved Spring Lock Washer |
| 34 |
|
[德标] DIN 6900-4 - 1990 |
齿形弹簧垫圈与螺钉组合件 Screw and Washer Assemblies with Coarse Threaded Screws with Captive Serrated Lock Washer |
| 35 |
|
[德标] DIN 6900-5 - 1990 |
锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer |
| 36 |
|
[国际] ISO 2982-2 (Clip) - 2013 |
滚动轴承附件 - 锁紧卡组件 Rolling Bearings - Accessories - Locking Clip Assemblies |
| 37 |
|
[国际] ISO 10644 - 2009 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw and Washer Sssemblies Made of Steel with Plain Washers - Washer Hardness Classes 200 HV and 300 HV |
| 38 |
|
[国际] ISO 10644 - 1998 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV |
| 39 |
|
[日标] JIS B 1188 (T1A) - 1995 |
十字槽盘头螺钉、平垫和弹垫组合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供应商(2) |
| 40 |
|
[日标] JIS B 1554 (AL/ALL) - 2016 |
锁紧卡组件 Locking Clip and Applicable Bolt |
| 41 |
|
[日标] JIS B 1130 - 2012 |
十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screw Assemblies with Washers |
| 42 |
|
[日标] JIS B 1130 - 2006 |
十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screws and Plain Washers Assemblies |
| 43 |
|
[日标] JIS B 1188 (T1B) - 1995 |
十字槽盘头螺钉和弹垫组合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles |
| 44 |
|
[日标] JIS B 1188 (T1C) - 1995 |
十字盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws And Plain Washer Assemblies |
| 45 |
|
[日标] JIS B 1188 (T1D) - 1995 |
十字盘头螺钉和外齿锁紧垫圈组合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies |
| 46 |
|
[汽标代号] Q 230B |
十字槽盘头螺钉与平垫组合 Cross Recessed Pan Head Tapping Screws and Plain Washers Assemblies 供应商(1) |
| 47 |
|
[汽标代号] Q 232 |
十字槽盘头螺钉与弹垫组合 Cross Recessed Pan Head Screws and Spring Washer Assemblies 供应商(1) |
| 48 |
|
[汽标代号] Q 234 |
十字槽盘头螺钉与外锯齿锁紧垫圈组合 Cross Recessed Pan Head Screws and Serrated Lock Washers External Teeth Assemblies 供应商(1) |
| 49 |
|
[汽标代号] Q 236B |
十字槽盘头螺钉与弹垫平垫组合 Cross Recessed Pan Head Screws Combine with Spring Washer and Plain Washers 供应商(2) |
| 50 |
|
[汽标代号] Q 140B |
六角头螺栓与平垫圈组合件 Hex Head and Plain Washer Combination Bolt |
| 51 |
|
[汽标代号] Q 240 |
十字槽沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross Recessed Countersunk Head Screws and Serrated Lock Washers External Teeth Assemblies |
| 52 |
|
[汽标代号] Q 242 |
十字槽半沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross Recessed Countersunk Raised Head Screws and Serrated Lock Washers External Teeth Assemblies |
| 53 |
|
[机械行业] JB /T 14722 - 2024 |
复合槽小盘头螺钉、弹簧垫圈和方形垫圈组合件 Complex Groove SmalI Pan Head Screw, Single CoiI Spring Lock Washer and Square Washer Assemblies 供应商(1) |
| 54 |
|
[机械行业] JB /T 14723 - 2024 |
复合槽小盘头螺钉和方形垫圈组合件 Complex Groove Small Pan Head Screw and Square Washer Assemblies 供应商(1) |
| 55 |
|
[机械行业] JB /T 7919.3 - 1999 |
锁紧卡组件 Locking Clip Assemblies |
| 56 |
![米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1]](http://img.164580.com/upload/48/pic/2022/01/14/1642132132016936492.jpg)
|
[美标] ASME/ANSI B 18.13.1M - 2011 |
米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter) |
| 57 |
![米制开槽盘头螺钉和弹垫组合 SEMS[Table 1]](http://img.164580.com/upload/48/pic/2022/01/14/1642134711881669531.jpg)
|
[美标] ASME/ANSI B 18.13.1M - 2011 |
米制开槽盘头螺钉和弹垫组合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter) |
| 58 |
|
[美标] ASME/ANSI B 18.13 - 1996 |
内六角圆柱头螺钉和弹垫组合SEMS [Table 1] Socket Head Cap Screw and Spring Washer Assemblies - SEMS |
| 59 |
|
[美标] ASME/ANSI B 18.13 - 1996 |
开槽盘头螺钉和弹垫组合 SEMS[Table 2] Slotted Pan Head Screw and Spring Washer Assemblies - SEMS |
| 60 |
|
[法国] NF E 27-303 - 1968 |
带孔球头形螺钉 Spherical Holed Head Screw |
| 61 |
|
[原电子工业部] SJ 2834 - 1987 |
十字盘头螺钉和平垫圈的组合 |
| 62 |
|
[原电子工业部] SJ 2835 - 1987 |
十字槽盘头螺钉和弹垫组合 |
| 63 |
|
[原电子工业部] SJ 2836 - 1987 |
十字盘头螺钉和平、弹垫组合 |
| 64 |
|
[标准] YJT 4031 |
皇冠螺钉 供应商(1) |
| 65 |
|
[标准] YJT 4068 (GB9074.4T) |
内六角花形槽盘头平弹垫组合件 Hexalobular Socket Pan Head Screws, Single Coil Spring Lock Washer and Plain Washer Assembles 供应商(1) |
| 66 |
|
[标准] YJT 4079 (GB 70.1 + GB 9074.13) |
内六角圆柱头螺钉和平垫、弹垫组合件 Hexagon Socket Head Cap Screws with Single Coil Lock Washer and Plain Washer Assemblies 供应商(3) |
| 67 |
|
[标准] YJT 8021 |
十一槽子母铆钉 供应商(1) |
| 68 |
|
[西门子] SN 60736 |
内六角花形盘头螺钉组合件 供应商(1) |
| 69 |
|
[德标] DIN EN ISO 10644 - 2009 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw and Washer Assemblies Made of Steel with Plain Washers – Washer Hardness Classes 200 HV and 300 HV 供应商(1) |
| 70 |
|
[德标] DIN EN ISO 10644 (S11) |
内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供应商(1) |
| 71 |
|
[德标] DIN EN ISO 10644 (S3) |
十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers |
| 72 |
|
[德标] DIN EN ISO 10644 (S4) |
内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers |
| 73 |
|
[德标] DIN EN ISO 10644 (S5) |
开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers |
| 74 |
|
[德标] DIN EN ISO 10644 (S6) |
开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers |
| 75 |
|
[德标] DIN EN ISO 10644 (S10) |
内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers |
| 76 |
|
[德标] DIN EN ISO 10644 (S12) |
六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers |
| 77 |
|
[德标] DIN EN ISO 10644 (S13) |
六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) and Washer Assemblies with Plain Washers |
| 78 |
|
[美标] ASME B 18.13 - 2017 |
内六角圆柱头螺钉和弹垫组合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS |
| 79 |
|
[美标] ASME B 18.13 - 2017 (ERTA) |
开槽盘头螺钉和弹垫组合SEMS [Table 2] Slotted Pan Head Screw and Spring Washer Assemblies-SEMS |
© 易紧通 服务热线：4006-164580（免长途费）