会员中心 | English

开槽盘头螺钉和弹垫组合SEMS [Table 2] ASME B 18.13 - 2018 (ERTA)

选择规格尺寸点击↓

10#

12#

1/4

5/16

3/8

ASME B 18.13 - 2018 (ERTA) 开槽盘头螺钉和弹垫组合SEMS [Table 2]

尺寸单位: inch

美标ASME B18.13 - 2018 (ERTA) ASME18.13 18 开槽盘头螺钉和弹垫组合SEMS [Table 2]

扫一扫分享

公差美制螺纹极限尺寸米/英制螺纹对照螺纹直径与受力截面积

螺纹尺寸
d

10#

12#

1/4

5/16

3/8

d
PP	UNC
d₁	最大值
d₁	最小值
h	最小值
d_c	最大值
d_c	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
n	最大值
n	最小值
t	最小值

0.0860	0.0990	0.1120	0.1250	0.1380	0.1640	0.1900	0.2160	0.2500	0.3125	0.3750
56	48	40	40	32	32	24	24	20	18	16
0.080	0.091	0.105	0.118	0.129	0.155	0.179	0.203	0.238	0.298	0.361
0.075	0.086	0.101	0.113	0.124	0.149	0.173	0.196	0.230	0.290	0.353
0.020	0.025	0.031	0.031	0.034	0.031	0.047	0.062	0.062	0.078	0.093
0.156	0.178	0.208	0.220	0.261	0.319	0.373	0.429	0.495	0.618	0.711
0.145	0.166	0.195	0.207	0.248	0.305	0.359	0.414	0.480	0.602	0.695
0.167	0.193	0.219	0.245	0.270	0.322	0.373	0.425	0.492	0.615	0.740
0.155	0.180	0.205	0.231	0.256	0.306	0.357	0.407	0.473	0.594	0.716
0.053	0.060	0.068	0.075	0.082	0.096	0.110	0.125	0.144	0.178	0.212
0.045	0.051	0.058	0.065	0.072	0.085	0.099	0.112	0.130	0.162	0.195
0.031	0.035	0.039	0.043	0.048	0.054	0.060	0.067	0.075	0.084	0.094
0.023	0.027	0.031	0.035	0.039	0.045	0.050	0.056	0.064	0.072	0.081
0.022	0.026	0.030	0.034	0.037	0.045	0.053	0.061	0.070	0.085	0.100

替代列表

ANSI/ASME B 18.13 - 1996 ANSI/ASME B 18.13 - 2017

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 9074.1 - 2018	螺栓或螺钉和平垫圈组合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供应商(5)
2	[国标] GB /T 9074.5 - 2004	十字槽小盘头螺钉和平垫圈组合件 Cross Recessed Small Pan Head Screw And Washer Assemblies With Plain Washers 供应商(2)
3	[国标] GB /T 9074.1 - 2002	螺栓或螺钉和平垫圈组合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供应商(5)
4	[国标] GB /T 9074.1 - 1988	十字槽盘头螺钉和平垫圈组合 Cross recessed pan head screws and plain washers assemblies 供应商(5)
5	[国标] GB 9074.2 - 1988	十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供应商(3)
6	[国标] GB 9074.3 - 1988	十字槽盘头螺钉和弹簧垫圈组合件 Cross Recessed Pan Head Screws And Single coil Spring Lock Washers Assemblies 供应商(3)
7	[国标] GB 9074.4 - 1988	十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross Recessed Pan Head Screws,Single Coil Spring Lock Washer And Plain Washers Assemblies 供应商(13)
8	[国标] GB /T 9074.5 - 1988	十字槽小盘头螺钉和平垫组合 Cross recessed small pan head screw and plain washer assemblies 供应商(2)
9	[国标] GB /T 9074.6 - 1988	十字槽小盘头螺钉和大平垫组合 Cross recessed small pan head screw and large plain washer assemblies 供应商(2)
10	[国标] GB 9074.7 - 1988	十字槽小盘头螺钉和弹簧垫圈组合件 Cross Recessed Small Pan Head Screw And Single Coil Spring Lock Washer Assemblies 供应商(2)
11	[国标] GB 9074.8 - 1988	十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件 Cross Recessed Small Pan Head Screw,Single Coil Spring Lock Washer And Plain Washer Assemblies 供应商(10)
12	[国标] GB 9074.9 - 1988	十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross Recessed Countersunk Head Screw And Countersunk Serrated External Toothed Lock Washer Assemblies 供应商(1)
13	[国标] GB /T 9074.1 (S11)	内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供应商(1)
14	[国标] GB /T 9074.32 - 2017	螺栓或螺钉和锥形弹性垫圈组合件 Bolt or Screw and Washer Assemblies with Conical Spring Washers
15	[国标] GB 9074.10 - 1988	十字槽半沉头螺钉和锥形锁紧垫圈组合 Cross Recessed Raised Countersunk Head Screw And Countersunk External Toothed Lock Washer Assemblies
16	[国标] GB /T 9074.1 (S3)	十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers
17	[国标] GB /T 9074.1 (S4)	内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers
18	[国标] GB /T 9074.1 (S5)	开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers
19	[国标] GB /T 9074.1 (S6)	开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers
20	[国标] GB /T 9074.1 (S10)	内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers
21	[国标] GB /T 9074.1 (S12)	六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers
22	[国标] GB /T 9074.1 (S13)	六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers
23	[德标] DIN 6900-1 - 1990	十字盘头螺钉和平垫圈的组合螺钉 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供应商(1)
24	[德标] DIN 6900-5 - 2004	锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
25	[德标] DIN 6304 (E) - 2002	带固定旋杆的卡式螺栓 E型 Tommy screws with fixed clamping bolt - Form E
26	[德标] DIN 6304 (F) - 2002	带固定旋杆的卡式螺栓 F型 Tommy screws with fixed clamping bolt - Form F
27	[德标] DIN 6306 (D) - 2002	带移动卡式螺栓的定位销钉 D型 Tommy screws with moveable clamping bolt - Type D
28	[德标] DIN 6306 (E) - 2002	带移动卡式螺栓的定位销钉 E型 Tommy screws with moveable clamping bolt - Type E
29	[德标] DIN 6900-2 - 1990	开槽螺钉和波形垫圈组合 Slotted screws and wave washers assemblies
30	[德标] DIN 6900-3 - 1990	鞍形弹簧垫圈与螺钉组合件 Screw And Washer Assemblies With Coarse Thread With Curved Spring Lock Washer
31	[德标] DIN 6900-4 - 1990	齿形弹簧垫圈与螺钉组合件 Screw And Washer Assemblies With Coarse Threaded Screws With Captive Serrated Lock Washer
32	[德标] DIN 6900-5 - 1990	锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
33	[国际] ISO 2982-2 (Clip) - 2013	滚动轴承附件 - 锁紧卡组件 Rolling bearings - Accessories - Locking Clip Assemblies
34	[国际] ISO 10644 - 2009	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw And Washer Sssemblies Made Of Steel With Plain Washers - Washer Hardness Classes 200 HV And 300 HV
35	[国际] ISO 10644 - 1998	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200
36	[日标] JIS B 1188 (T1A) - 1995	十字槽盘头螺钉、平垫和弹垫组合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供应商(2)
37	[日标] JIS B 1554 (AL/ALL) - 2016	锁紧卡组件 Locking clip and applicable bolt
38	[日标] JIS B 1130 - 2012	十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screw Assemblies With Washers
39	[日标] JIS B 1130 - 2006	十字盘头螺钉和平垫圈的组合 Cross recessed pan screws and plain washers assemblies
40	[日标] JIS B 1188 (T1B) - 1995	十字槽盘头螺钉和弹垫组合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles
41	[日标] JIS B 1188 (T1C) - 1995	十字盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws And Plain Washer Assemblies
42	[日标] JIS B 1188 (T1D) - 1995	十字盘头螺钉和外齿锁紧垫圈组合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies
43	[汽标代号] Q 230B	十字槽盘头螺钉与平垫组合 Cross recessed pan head tapping screws and plain washers assemblies 供应商(1)
44	[汽标代号] Q 232	十字槽盘头螺钉与弹垫组合 Cross recessed pan head screws and spring washer assemblies 供应商(1)
45	[汽标代号] Q 234	十字槽盘头螺钉与外锯齿锁紧垫圈组合 Cross recessed pan head screws and serrated lock washers external teeth assemblies 供应商(1)
46	[汽标代号] Q 236B	十字槽盘头螺钉与弹垫平垫组合 Cross recessed pan head screws combine with spring washer and plain washers 供应商(2)
47	[汽标代号] Q 140B	六角头螺栓与平垫圈组合件 Hex head and plain washer combination bolt
48	[汽标代号] Q 240	十字槽沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross recessed countersunk head screws and serrated lock washers external teeth assemblies
49	[汽标代号] Q 242	十字槽半沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross recessed countersunk raised head screws and serrated lock washers external teeth assemblies
50	[机械行业] JB /T 7919.3 - 1999	锁紧卡组件 Locking Clip Assemblies
51	[美标] ASME/ANSI B 18.13.1M - 2011	米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter) 供应商(1)
52	[美标] ASME/ANSI B 18.13.1M - 2011	米制开槽盘头螺钉和弹垫组合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter)
53	[美标] ASME/ANSI B 18.13 - 1996	内六角圆柱头螺钉和弹垫组合SEMS [Table 1] Socket head cap screw and spring washer assemblies-SEMS
54	[美标] ASME/ANSI B 18.13 - 1996	开槽盘头螺钉和弹垫组合 SEMS[Table 2] Slotted pan head screw and spring washer assemblies-SEMS
55	[原电子工业部] SJ 2834 - 1987	十字盘头螺钉和平垫圈的组合
56	[原电子工业部] SJ 2835 - 1987	十字槽盘头螺钉和弹垫组合
57	[原电子工业部] SJ 2836 - 1987	十字盘头螺钉和平、弹垫组合
58	[企标] YJT 4031	皇冠螺钉供应商(1)
59	[企标] YJT 4068 (GB9074.4T)	内六角花形槽盘头平弹垫组合件 Hexalobular Socket Pan Head Screws, Single coil spring lock washer and Plain washer Assembles 供应商(1)
60	[企标] YJT 4079 (GB 70.1 + GB 9074.13)	内六角圆柱头螺钉和平垫、弹垫组合件 Hexagon socket head cap screws with single coil lock washer and plain washer assemblies 供应商(5)
61	[企标] YJT 8021	十一槽子母铆钉供应商(1)
62	[西门子] SN 60736	内六角花形盘头螺钉组合件供应商(1)
63	[德标] DIN EN ISO 10644 - 2009	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw and Washer Assemblies made of Steel with Plain Washers – Washer hardness classes 200 HV and 300 HV 供应商(1)
64	[德标] DIN EN ISO 10644 (S11)	内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供应商(1)
65	[德标] DIN EN ISO 10644 (S3)	十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers
66	[德标] DIN EN ISO 10644 (S4)	内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers
67	[德标] DIN EN ISO 10644 (S5)	开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers
68	[德标] DIN EN ISO 10644 (S6)	开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers
69	[德标] DIN EN ISO 10644 (S10)	内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers
70	[德标] DIN EN ISO 10644 (S12)	六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers
71	[德标] DIN EN ISO 10644 (S13)	六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers
72	[美标] ASME B 18.13 - 2017	内六角圆柱头螺钉和弹垫组合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS