会员中心 | English

沉头封闭型抽芯铆钉 DIN EN ISO 15974 - 2001

选择规格尺寸点击↓

Φ3.2

Φ4

Φ4.8

尺寸单位: mm

德标DIN EN ISO 15974 - 2001 DIN EN ISO1597 沉头封闭型抽芯铆钉

扫一扫分享

单重计算公差

公称直径
d

Φ3.2

Φ4

Φ4.8

d	最大值
	最小值
d_k	最大值
	最小值
k	最大值
d₁	最大值
L₁	最小值
剪切载荷/N(min)
拉力载荷/N(min)
钉芯断裂载荷/N(max)

3.28	4.08	4.88
3.05	3.85	4.65
6.7	8.4	10.1
5.8	6.9	8.3
1.3	1.7	2
1.85	2.35	2.77
25	25	27
1100	1600	2200
1450	2200	3100
3500	5000	7000

①,材料：铆钉体由铝合金(AlA)制成，钉芯由钢(St)制成。材料规格由制造商决定。机械性能：当按照ISO 14589进行测试时，最小剪切载荷，最小拉伸载荷和最大钉芯断裂载荷应符合原件表3数据

采用标准

ISO 15974 - 2000

沉头封闭型抽芯铆钉

技术条件和引用标准

材料
表面处理
表面缺陷
验收及包装

Blind rivets to this International Standard shall have a rivet body made of aluminium alloy (AIA) and a mandrel made of steel (St).
Material specification is at the discretion of the manufacturer.

The surface finish shall be natural with a protection for storage.

Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.

ISO 3269

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 12616.1 - 2004	封闭型沉头抽芯铆钉 11级（铝钉，钢芯） Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 11 - Al/St 供应商(6)
2	[国标] GB 12616 - 1990	封闭型沉头抽芯铆钉 120 deg Flush Head Break Mandrel Closed and Blind Rivets 供应商(6)
3	[美标] IFI 126 - 2003	120°封闭型沉头抽芯铆钉 120 Deg Countersunk Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
4	[美标] IFI 509 - 1999	米制封闭型沉头抽芯铆钉 Metric 120 Deg Flush Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
5	[国际] ISO 15974 - 2000	沉头封闭型抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St 供应商(4)
6	[汽标代号] Q 443	沉头抽芯铆钉 Countersunk head with break mandrel blind rivets 供应商(3)
7	[汽标代号] Q 443B	封闭型沉头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 11 供应商(3)
8	[法国] NF E 25-711 - 2001	铝帽铁芯沉头封闭型拉铆钉 Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
9	[企标] YJT GB/T 12616.4 - 2004	51级封闭型沉头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head--property Class 51 供应商(3)

沉头封闭型抽芯铆钉 DIN EN ISO 15974 - 2001

采用标准

相关材料标准或牌号

技术条件和引用标准

引用参考