Unit:
毫米(mm) |
| ①,Inclination 8% ± 0.5%: two grooves.
Inclination 5% ± 0.5%: without grooves, shaped letter A in the designation. ②,Inclination 8％±0.5％：e = h - 0.04 b Inclination 5％±0.5％：e = h - 0.025 b |
|
Unit:
毫米(mm) |
| ①,Inclination 8% ± 0.5%: two grooves.
Inclination 5% ± 0.5%: without grooves, shaped letter A in the designation. ②,Inclination 8％±0.5％：e = h - 0.04 b Inclination 5％±0.5％：e = h - 0.025 b |
Square Taper Washers For I Section
Square Taper Washers For Slot Section
Spherical Washers, Conical Seats - Type D
Square Taper Washers For U-sections
Square Taper Washers For Use With I Sections
Square taper washers for use with channel sections
Square Washers; Especially for Wood Constructions
Square taper washers for use with 1 sections
Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections
Square Washers [Table JA.1.]
Square Washers
Square taper washers for I section-Light style
Square taper washers for slot section-Light style
Square Taper Washers For Slot Section-Light Style
Square Beveled Washers (Malleable Iron) [Type A]
Square Beveled Washers (Steel) [Type B]
Channel Clamping Plates For UNP Section (Inclination 8％)
Metric Square Taper Washers
Square Black Washers With Round Holes [Table 11]
Square or D-shaped Taper Washers [Table 12]
Hardened Beveled Washers, Inch Washers
Hardened Beveled Washers
Square hardened beveled washers
Metric Hardened Beveled Washers
Square Washers
Square Taper Washers With Double Slots For Channel
Square Taper Washers For 工 Steel With Single Slot
Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure
Square Taper Washers For High Prestressed Channels
Square Washers
Square Washers
Construction Machinery and Equipment - High Strength Square Taper Washers For 工 Section
Construction Machinery and Equipment - High Strength Square Taper Washers For Slot Section
Square taper washers for use with channels (6° taper) Type B, and use with I-beams (8° taper) Type C
Taper Washers For Channels ( ISMC )
Double Groove Square Taper Washers
Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436)
Hardened Beveled Washers With Slope Or Taper In Thichness 1:16 (ASTM F 436)
