GB 118 - 1986 Taper Pins With Internal Thread - Type A and B

Unit: 毫米(mm)

Nominal Diameter
d

Φ6

Φ8

Φ10

①,Type A (ground pins) : Surface finish Ra = 0.8μm
Type B (turned pins) : Surface finish Ra = 3.2μm

Equivalent standard

GB	GB /T 118
ISO	ISO 8736
DIN	DIN EN 28736
EN	EN 28736
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

Taper Pins with Internal Thread - Type A and B

Taper Pins with Internal Thread

Taper Pins with Internal Thread, Unhardened

Taper Pins with Internal Thread

Taper Pins with Internal Thread, Unhardened

Taper Pins with Internal Thread, Unhardened

Morse Taper Pins with Internal Thread

Taper Pins with Internal Thread

Taper Pins with Internal Thread

Taper Pins with Internal Thread

Taper Pins with Internal Thread

Unhardened Taper Pins with Internal Thread