Unit:
毫米(mm) |
| ①,* Only for closing threaded holes for indexing valves. ②,# These sizes with short screw i are to be avoided as far as possible. If they are required in exceptional cases, the threading length i must be indicated in the designation, eg. : Screw plug DIN 910 - G 1/4 A × 8 - St ③,! For width across flats SW 16, SW 18 and SW 21, the data of width across flats must be indicated in the designation in order to avoid confusion. ④,Weights slightly different for different width across flats. ⑤,The pipe thread corresponds to DIN EN ISO 228-1 ⑥,Metric fine thread according to DIN 13-5, -6 or -7 |
