Unit:
毫米(mm) |
①,It is allowed to produce screws with the lengths not specified in Table 2 by agreement between the customer and the manufacturer. ②,Thread shall be in accordance with GOST 24705-81. Thread runout and undercut shall be in accordance with GOST 10549-80. ③,Straight slots shall be in accordance with GOST 24669-81; Phillips slots shall be in accordance with GOST 10753-80. ④,Under-head radius shall be in accordance with GOST 24670-81. ⑤,Tolerances, methods of monitoring the dimensions and deviations of surfaces form and arrangement shall be in accordance with GOST 1759.1-82. ⑥,Surface defects and monitoring methods shall be in accordance with GOST 1759.2-82. ⑦,Technical requirements shall be in accordance with GOST 1759-70. |
Cross recessed pan head screws with collar - Product grade A
Plastic Pan Head Screws With Cross Recess
Cross Recessed Round Head Screws
Suppliers(1)
Cross Recessed Round Head Screws
Suppliers(1)
Cross recessed round head screws
Suppliers(1)
Cross recessed round head screws
Suppliers(2)
PZ Drives Round Head Screws With Collar
Cross recessed round head screws with collar
Suppliers(1)
Cross recessed round head screws
Cross Recessed Round Head Screws
Cross Recessed Round Head Screws
Cross recessed round head screws With Collar
Cross recessed round head screws
Cross recessed round head screws With Collar