|
|
Unit:
毫米(mm) |
| ①,Throat dimensions are basic. When slots are intended to be used for holding only, tolerances can be 0.0 + 0.010 in. or H12 Metric (ISO/R286); when intended for location, tolerance can be 0.0 + 0.001 in. or H8 Metruc (ISO/R286). |
Machine tool talbes - T-slots and corresponding bolts
Bolts For T-Slot
Machine tool talbes - T-slots and corresponding bolts
Clevis Pins with Head and Threaded Portion
T-head Bolts with Double Nib
T-head Bolts with Square Neck
T-head bolts with hole
T-head bolts with large head
Bolts and Screws for T-slots (d ≤ M12x12)
Mushroom Head Anchor Screws With Metric ISO Thread - Class C
T-head Bolts with Square Neck
T-head Bolts with Double Nibs
T-head bolts
T-Head Bolts (Hammer Head Bolts) For Railway Vehicles
Clevis pins with head and stud end
T-head bolts with large head
Bolts and Screws for T-slots (d ≥ M12x14)
Machine tool talbes - T-slots and corresponding bolts
T-Slot Bolts
T-Slot bolts
Bolts With Head: 2nd Class
Suppliers(1)
Bolts with Head: 3rd Class
Bolts With Head: First Class
T-head anchor Bolt
Quick discharging bolt for T-slot
Bolts for slot
T head bolts
Crawler dozer-Bolts for drive sprocket segment - Type A
Crawler dozer-Bolts for drive sprocket segment - Type B
T-Slot Bolts
Crawler dozer-Bolts For Drive Sprocket Segment - Type B
Spherical Head Screw
![T-Head Bolts,(Inch Series) [Table10] (A307, SAE J429, F468, F593)](https://imgcc.164580.com/upload/48/pic/2021/04/14/1618362469272371645.jpg)
T-Head Bolts,(Inch Series) [Table10] (A307, SAE J429, F468, F593)
Suppliers(1)
T- Head Bolts
Suppliers(1)
T-bolts
T-Head Bolts With Holes
T-head Bolts With Square Neck
T-head Bolts With Double Nips
Clamp bolts for rail track fastenings
T-Slot Bolts with Tooth
T-Head Bolts,(Inch Series) [Table10] (A307, SAE J429, F468, F593)
Suppliers(1)
![Clipped Head Plow Bolts [Table 5] (A307, F468, F593, SAE J 429)](https://imgcc.164580.com/upload/48/pic/2019/07/15/1563175796932337655.jpg)
Clipped Head Plow Bolts [Table 5] (A307, F468, F593, SAE J 429)
