Unit:
|
①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted. ②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable. ③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes. ④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser. |
Hexalobular Socket Pan Head Tapping Screws
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws
Hex lobular socket pan head tapping screws
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws
Hexalobular Socket Raised Head Tapping Screws With Collar
Hexalobular Socket Pan Head Tapping Screws
Suppliers(1)
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular Socket Pan Head Tapping Screws
Suppliers(1)
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws
Hexalobular socket raised countersunk(oval) head tapping screws
Hexalobular Socket Raised Countersunk Head Self-Tapping Screws
Hexalobular Socket Countersunk Head Self-Tapping Screws
Hexalobular Socket Pan Head Self-Tapping Screws
Hex lobular socket pan head tapping screws
Hexalobular socket countersunk head tapping screws
Hex lobular socket raised countersunk head tapping screws
Hexalobular socket pan head tapping screws for plastic
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws
Hexalobular Socket Pan Head Tapping Screws
Round Washer Head with TORX PLUS Self-tapping Screw [DELTA PT Thread]
Hexalobular Socket countersunk head Tapping screws [PT-K Thread]
Hexalobular Socket countersunk head Tapping screws [PT-K Thread]
Hexalobular socket Pan Head Tapping Screws With Collar [PT-K Thread]
Pan Head with TORX PLUS Self-tapping Screw [DELTA PT Thread]
Hexalobular Socket Raised Countersunk(Oval) Head Tapping Screws [PT-K Thread]
Hexalobular Socket Raised (Oval) Head Tapping Screws
Hexagon Socket Pan Head Tapping Screws
Hexalobular Socket Countersunk Head Tapping Screws
Hexalobular socket pan head tapping screws for plastic
82° Countersunk head with hexalobular slot tapping screws - Type AB (ABR)
Hexalobular socket raised countersunk head tapping screws - Type AB and ABR
Hexalobular Socket Pan Head Tapping Screws - Type AB and ABR
Cheese Head Tapping Screws with Hexalobular Slot - Type AB and ABR
Mushroom Head Tapping Screws with Hexalobular Slot - Type AB and ABR
Hexalobular Socket Round Head Tapping Screws With Collar - Type AB and ABR
82° Countersunk head with hexalobular slot tapping screws - Type AB (ABR)
Hexalobular Socket Pan Head Tapping Screws - Type AB and ABR
Cheese Head Tapping Screws with Hexalobular Slot - Type AB and ABR
Mushroom Head Tapping Screws with Hexalobular Slot - Type AB and ABR
Hexalobular Socket Round Head Tapping Screws With Collar - Type AB and ABR
T-type TORX pan head tapping screws
T-type TORX countersunk head tapping screws
T-type TORX raised countersunk head tapping screws
T-type TORX truss countersunk head tapping screws
T-type TORX collar head tapping screws