Unit:
|
①,A slight rounding of all edges and comers of the hex surfaces of indented hex heads shall be permissible, provided the diameter of the bearing circle is equal to no less than 90% of the specified minimum width-across-flats dimension. ②,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted. |
Hexagon Bolts With Cross Recess On Head
Suppliers(2)
Cross recessed hexagon head bolts
Suppliers(1)
Cross recessed hexagon bolts with indentation
Suppliers(1)
Type I Nonindented Regular and Large Hex Head Screws
Cross Recess Indented Regular and Large Hex Head Screws
Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws