Unit:
|
| ①,Machine Screw Length of Thread 1) Sizes No.5 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in. 2) Sizes No.6 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified. ②,Unless otherwise specified by purchaser, hex washer head screws are not slotted. ③,Fillet radius, R, at the edges and corners of the sides of the hex and the top of the washer shall not exceed 0.15 times the basic screw diameter. ④,Shape of indentation optional. ⑤,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread. |
![Hexagon Bolt with flange (Collar) - Type 1 - [Table JA.2]](https://imgcc.164580.com/upload/48/pic/2023/11/17/1700201088392116642.jpg)
![Plain and Slotted Hex Washer Head Screws [Table 32] (ASTM F837, F468)](https://imgcc.164580.com/upload/48/pic/2023/11/17/1700200986084395472.jpg)
