DIN 7500 (CE) - 2007 Cross Recessed Pan Head Thread Rolling Screws

Unit: 毫米(mm)

Thread Size
d

M2.5

P	Pitch
b	min
d_k	max=nominal size
d_k	min
k	max=nominal size
k	min
Socket No.
m	Form H
m	Form Z

0.4	0.45	0.5
25	25	25
4.0	5.0	5.6
3.7	4.7	5.3
1.60	2.10	2.40
1.46	1.96	2.26
0	1	1
1.9	2.7	3
2.1	2.6	2.8

①,Material: The self-tapping screws must be made from cold extrusion steels. The core hardness must be 290 HV10 to 370 HV10. The surface hardness must be at least 450 HV0.3 after the heat treatment.

Equivalent standard

DIN	DIN 7500CE
UNI	UNI 8112
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

GB /T 6560 - 2014

Cross Recessed Pan Head Thread Rolling Screws
Suppliers(2)

GB /T 6560 - 1986

Cross Recessed Pan Head Thread Forming Screws
Suppliers(2)

DIN 7500 (CE) - 1995

Cross recessed pan head thread rolling screws
Suppliers(1)

DIN 7500 (C) - 1984

Cross recessed pan head thread rolling screws
Suppliers(1)

Q 262

Cross recessed pan head thread forming screws

UNI 8112

Cross Recessed Round Head Forming Screws

SJ 2831 - 1987

Cross recessed round head triangle lock self-tapping screws

SJ 2832 - 1987

Cross recessed round head tapping screws with collar

ASME B 18.6.4 - 1998 (R2005)

Cross Recessed Big Flat Head Self-Tapping Screws

GotopScrews International Co., Limited
Contact:	Manager Zhuang
Cellphone：	86-13008864675
email：	hongwei@gotopscrews.com
Material: carbon steel, alloy steel, stainless steel, copper, aluminum, titanium; Specifications: M0.6~M6; Length: 4~60mm; Surface Treatment: galvanizing, nickel plating, zinc nickel alloy, electrophoresis, dacromet, CD grain, PVD, etc.