<< Back

ISO 683-14 - 2004 Heat-Treatable Steels,alloy Steels and Free-Cutting Steels. Part 14:Hot-Rolled Steels for Quenched and Tempered Springs Third Edition

牌号 化学成分(质量分数%)
牌号
牌号
牌号
旧牌号
牌号
旧牌号
牌号
旧牌号
牌号
旧牌号
牌号
牌号
旧牌号
牌号
牌号
旧牌号
牌号
旧牌号
牌号
旧牌号
ⓐ在询价和订货时允许含量比表中值低

I want to purchase I can supply
Similar Products & Suppliers
Permissible tolerances for chemical composition of steel products

GB /T 222 - 2006

Permissible tolerances for chemical composition of steel products

Conversion of hardness and strength for ferrous metal

GB /T 1172 - 1999

Conversion of hardness and strength for ferrous metal

Cold-rolled carbon structural steel strips

GB /T 716 - 1991

Cold-rolled carbon structural steel strips

Carbon Constructional Quality Steel Wires

GB 3206 - 1982

Carbon Constructional Quality Steel Wires

Stainless Steel Wire for Cold Heading and Cold Forging

GB /T 4232 - 2019

Stainless Steel Wire for Cold Heading and Cold Forging

Stainless steel wires

GB /T 4240 - 2019

Stainless steel wires

Designations of Corrosion-Resistant Alloy

GB /T 15007 - 2017

Designations of Corrosion-Resistant Alloy

Stainless Steel Wire Rod

GB /T 4356 - 2016

Stainless Steel Wire Rod

Cold Rolled Stainless Steel Plate and Strip

GB /T 3280 - 2015

Cold Rolled Stainless Steel Plate and Strip

Heat-resisting steel plate , sheet and strip

GB /T 4238 - 2015

Heat-resisting steel plate , sheet and strip

Steels for Cold Heading and Cold Extruding

GB /T 6478 - 2015

Steels for Cold Heading and Cold Extruding

Quality Carbon Structure Steels

GB /T 699 - 2015

Quality Carbon Structure Steels

Austenitic-Ferritic duplex stainless steel bars

GB /T 31303 - 2014

Austenitic-Ferritic duplex stainless steel bars

Stainless steel wires for spring

GB /T 24588 - 2009

Stainless steel wires for spring

Stainless steel wires

GB /T 4240 - 2009

Stainless steel wires

High Strength Low Alloy Structural Steels

GB /T 1591 - 2008

High Strength Low Alloy Structural Steels

Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes

GB /T 21833 - 2008

Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes

Free-Cutting Structural Steel

GB /T 8731 - 2008

Free-Cutting Structural Steel

Stainless Steel Bars

GB /T 1220 - 2007

Stainless Steel Bars

Heat-resistant Steel Bars

GB /T 1221 - 2007

Heat-resistant Steel Bars

Spring Steels

GB /T 1222 - 2007

Spring Steels

Stainless and heat-resisting steels - Designation and chemical composition

GB /T 20878 - 2007

Stainless and heat-resisting steels - Designation and chemical composition

Steels for Turbine Bolts at High Temperature

GB /T 20410 - 2006

Steels for Turbine Bolts at High Temperature

Carbon Structural Steels

GB /T 700 - 2006

Carbon Structural Steels

Classification and Designation for Superalloys and High Temperature Intermetallic Materials

GB /T 14992 - 2005

Classification and Designation for Superalloys and High Temperature Intermetallic Materials

Structural Steels Subject to End-Quench Hardenability Requirments

GB /T 5216 - 2004

Structural Steels Subject to End-Quench Hardenability Requirments

Stainless steel for surgical implants

GB 4234 - 2003

Stainless steel for surgical implants

High-Carbon Chromium Bearing Steel

GB /T 18254 - 2002

High-Carbon Chromium Bearing Steel

Steels for cold heading and cold extruding

GB T 6478 - 2001

Steels for cold heading and cold extruding

Alloy Structure Steels

GB /T 3077 - 1999

Alloy Structure Steels

Quality Carbon Structural Steels

GB /T 699 - 1999

Quality Carbon Structural Steels

Structural Steel Grades And Mechanical Property For Forgings

GB /T 17107 - 1997

Structural Steel Grades And Mechanical Property For Forgings

Stainless steel bars

GB /T 1220 - 1992

Stainless steel bars

Cold rolled stainless steel and heatresisting steel strip

GB /T 4239 - 1991

Cold rolled stainless steel and heatresisting steel strip

Technical conditions for alloy tool steel

GB /T 1299 - 1985

Technical conditions for alloy tool steel

Cold Heading and Extruding Steels Technical Delivery Conditions for Killed Unalloyed Steels Not Intended for Heat Treatment

DIN 1654-2 - 1989

Cold Heading and Extruding Steels Technical Delivery Conditions for Killed Unalloyed Steels Not Intended for Heat Treatment

Free-Cutting Steels Technical Delivery Conditions

DIN 1651 - 1988

Free-Cutting Steels Technical Delivery Conditions

Steels for Quenching and Tempering; Technical Delivery Conditions

DIN 17200 - 1987

Steels for Quenching and Tempering; Technical Delivery Conditions

Case Hardening Steel Coil

DIN 17210 - 1986

Case Hardening Steel Coil

Stainless Steel Wire and Strip for Springs Technical Delivery and Conditions

DIN 17224 - 1982

Stainless Steel Wire and Strip for Springs Technical Delivery and Conditions

Steels for General Structural Purposes Quality Standard

DIN 17100 - 1980

Steels for General Structural Purposes Quality Standard

Ball and Roller Bearing Steels Technical Conditions of Delivery

DIN 17230 - 1980

Ball and Roller Bearing Steels Technical Conditions of Delivery

Stainless Steel Quality Standards

DIN 17440 - 1972

Stainless Steel Quality Standards

Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length

ISO 1127 - 1992

Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length

Plain end seamless precision steel tubes - Technical conditions for delivery

ISO 3304 - 1985

Plain end seamless precision steel tubes - Technical conditions for delivery

Plain end welded precision steel tubes - Technical conditions for delivery

ISO 3305 - 1985

Plain end welded precision steel tubes - Technical conditions for delivery

Heat-resistant Steels

ISO 4955 - 2005

Heat-resistant Steels

Technical specification  stainless steels-chemical composition

ISO TS 15510 - 2003

Technical specification stainless steels-chemical composition

Steel Wire for Mechanical Springs — Part 2: Patented Cold-Drawn Non-Alloy Steel Wire

ISO 8458-2 - 2002

Steel Wire for Mechanical Springs — Part 2: Patented Cold-Drawn Non-Alloy Steel Wire

Steel Wire for Mechanical Springs. Part 3:Oil-Hardened and Tempered Wire Second Edition

ISO 8458-3 - 2002

Steel Wire for Mechanical Springs. Part 3:Oil-Hardened and Tempered Wire Second Edition

High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels

ISO 4951-2 - 2001

High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels

Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels

ISO 9327 (-5) - 1999

Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels

Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties

ISO 9327 (-3) - 1999

Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties

Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels

ISO 683-18 - 1996

Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels

High Yield Strength Flat Steel Products

ISO 4950-2 - 1995

High Yield Strength Flat Steel Products

Structural Steels--Plates,Wide Flats,bars,Sections and Profiles

ISO 630 - 1995 (R2003)

Structural Steels--Plates,Wide Flats,bars,Sections and Profiles

Heat-Resistant Steels and Alloy

ISO 4955 - 1994

Heat-Resistant Steels and Alloy

Steels for cold heading and cold extruding second edition

ISO 4954 - 1993

Steels for cold heading and cold extruding second edition

Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels

ISO 683-9 - 1988

Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels

Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts

ISO 683-1 - 1987

Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts

Heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steel

ISO 683-11 - 1987

Heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steel

Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels

ISO 683-13 - 1986

Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels

Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels

ISO 683-16 - 1976

Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels

Stainless steel wire rods

JIS G 4308 - 2013

Stainless steel wire rods

Rolled steels for general structure

JIS G 3101 - 2011

Rolled steels for general structure

Hot-rolled mild steel plates,sheets and strip

JIS G 3131 - 2010

Hot-rolled mild steel plates,sheets and strip

Cold reduced carbon steel sheets and strip

JIS G 3141 - 2009

Cold reduced carbon steel sheets and strip

Free-Cutting Steels

JIS G 4804 - 2008

Free-Cutting Steels

High carbon chromium bearing steels

JIS G 4805 - 2008

High carbon chromium bearing steels

Carbon Tool Steel

JIS G 4401 - 2006

Carbon Tool Steel

Carbon steels for cold heading -- Wire rods

JIS G 3507-1 - 2005

Carbon steels for cold heading -- Wire rods

Boron Steels for Cold Heading Part 1:Wire Rods

JIS G 3508-1 - 2005

Boron Steels for Cold Heading Part 1:Wire Rods

Carbon steels for machine structural use

JIS G 4051 - 2005

Carbon steels for machine structural use

Aluminium chromium molybdenum steels

JIS G 4202 - 2005

Aluminium chromium molybdenum steels

Stainless Steel Bars

JIS G 4303 - 2005

Stainless Steel Bars

Hot-Rolled Stainless Steel Plate,Sheet and Strip

JIS G 4304 - 2005

Hot-Rolled Stainless Steel Plate,Sheet and Strip

Cold-rolled stainless steel plate,sheet and strip

JIS G 4305 - 2005

Cold-rolled stainless steel plate,sheet and strip

High speed tool steels

JIS G 4403 - 2005

High speed tool steels

Spring Steels

JIS G 4801 - 2005

Spring Steels

Cold-Rolled Steel Strips for Springs

JIS G 4802 - 2005

Cold-Rolled Steel Strips for Springs

Cold finished carbon and alloy steel bars

JIS G 3124 - 2004

Cold finished carbon and alloy steel bars

Stainless steel pipes

JIS G 3459 - 2004

Stainless steel pipes

Low-Alloyed Steels for Cold Heading Part 1:Wire Rods

JIS G 3509-1 - 2003

Low-Alloyed Steels for Cold Heading Part 1:Wire Rods

Structural steels with specified hardenability bands

JIS G 4052 - 2003

Structural steels with specified hardenability bands

Alloy steel plate for machinery

JIS G 4053 - 2003

Alloy steel plate for machinery

Stainless steel wires for cold heading and cold forging

JIS G 4315 - 2000

Stainless steel wires for cold heading and cold forging

Steels for Cold Heading and Cold Extruding

JIS G 7401 - 2000

Steels for Cold Heading and Cold Extruding

Stainless steel wires

JIS G 4309 - 1999

Stainless steel wires

High tensile strength steel tubes for tower structural purposes

JIS G 3474 - 1995

High tensile strength steel tubes for tower structural purposes

Heat-resisting steel bars and wire rods

JIS G 4311 - 1991

Heat-resisting steel bars and wire rods

Heat-resisting steel plate,sheet and strip

JIS G 4312 - 1991

Heat-resisting steel plate,sheet and strip

High tensile strength carbon steel castings and low alloy steel castings structural purposes

JIS G 5111 - 1991

High tensile strength carbon steel castings and low alloy steel castings structural purposes

Cold Formed Welded Steel Structural Hollow Sections - Part 2: Tolerances, Dimensions and Sectional Properties

EN 10219-2 - 2019

Cold Formed Welded Steel Structural Hollow Sections - Part 2: Tolerances, Dimensions and Sectional Properties

Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm

EN 3018 - 2019

Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm

Hot Rolled Steel Channels, I and H Sections - Dimensions and Masses

EN 10365 - 2017

Hot Rolled Steel Channels, I and H Sections - Dimensions and Masses

Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm

EN 2947 - 2006

Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm

Hot Rolled Square Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions

EN 10059 - 2003

Hot Rolled Square Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions

Hot Rolled Round Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions

EN 10060 - 2003

Hot Rolled Round Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions

Structural Steel I And H Sections - Tolerances on Shape and Dimensions

EN 10034 - 1993

Structural Steel I And H Sections - Tolerances on Shape and Dimensions

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

EN 10269 - 2013

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows