DIN 1444 - 1974 Clevis Pins with Head

Unit: 毫米(mm)

Nominal Diameter
d

d_k	max
d_k	min
d₁	max
d₁	min
k	Nominal Size
	max
	min
r
L_h	min
c	max
e	≈

5	6	8
4.7	5.7	7.64
0.94	1.14	1.34
0.8	1	1.2
1	1	1.6
1.125	1.125	1.725
0.875	0.875	1.475
0.6	0.6	0.6
1.6	2.2	2.9
1	1	2
0.5	0.5	1

per 1000 units ≈ kg(7.85kg/cm3)

①,Material Steel = 9SMnPb28K (according to DIN 1651) or Cq35 (according to DIN 1654) at the manufacturer's choice
②,The desired tolerance field for bolt diameter d shall be indicated in the designation. The tolerance fields a11, c11, f8, or h11 are recommended.

GB /T 880 (B) - 2008

Clevis Pins Without Head(Pins With Split Pin Hole)

GB /T 882 - 2008

Clevis Pin With Head - Type A and B
Suppliers(1)

GB /T 880 - 1986

Clevis pins without head （Pins with split pin hole ）

GB /T 882 - 1986

Clevis pins with head
Suppliers(1)

GB /T 39949.1 (AA4-R/AA6-R) - 2021

Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series: AA4-R - Pivot pin, plain bearing or AA6-R - Pivot pin, spherical bearing

DIN 5526 - 1999

Pins with head for rail vehicles

DIN 11023 - 1979

linch pins

DIN 1434 - 1977

Clevis Pins With Small Head; Finish M

DIN 1435 - 1977

Clevis Pins With Small Head; Finish mg

ISO 8132 (AA4-R/AA6-R) - 2022

Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series: AA4-R - Pivot pin, plain bearing or AA6-R - Pivot pin, spherical bearing

ISO 2340 (B) - 1986

Clevis Pins Without Head - Type B

ISO 2340 (A) - 1986

Clevis Pins Without Head - Type A

ISO 2341 - 1986

Clevis Pins With Head - Type A And B

JIS B 2801 - 1996

Shackle pin, forms BA and SA, and of round plug

Q 510

Clevis pins with head

ASME/ANSI B 18.8.1 - 2000

Clevis Pins With Head

ASME/ANSI B 18.8.8M - 1994

Metric clevis pin with head

EN 22340 (B) - 1992

Clevis Pins without Head - Form B

EN 22340 (A) - 1992

Clevis Pins without Head - Form A

EN 22341 - 1992

Clevis Pins with Head

NF E 25-753 - 1992 (R2002)

Clevis Pins Without Head

NF E 25-754 - 1992 (R2002)

Clevis Pins With Head

TB /T 54 - 1993

TB /T 56 - 1993

GOST 9650 (Type 3) - 1980

Axle with a locking washer groove

GOST 9650 (Type 4) - 1980

Axle with a safety ring groove

GOST 9650 (Type 5) - 1980

Clevis Pin With Head

GOST 9650 (Type 7) - 1980

Axle with a locking washer

GOST 9650 (Type 8) - 1980

Axle with a safety ring groove

SAE J 493 - 1961

Clevis Pin

DIN EN 22340 (A) - 1992

Clevis Pins without Head - Form A

DIN EN 22340 (B) - 1992

Clevis Pins Without Head - Form B

DIN EN 22341 - 1992

Clevis Pins with Head
Suppliers(1)

IS 6862 - 2005

Clevis Pins Without Head

IS 6863 - 2005

Clevis Pins With Head

ASME B 18.8.1 - 2014

Clevis Pins With Head

Shanghai Kinsom Precision Hardware Co.,Ltd
Contact:	Tina Cheung
Cellphone：	+86-18114615363
email：	tina@ksfasteners.com
material:carbon steel，copper，Stainless steel 304 ,316,aluminum;Specifications:M2-M20 , 8-32 ,1/4-20 ,10-24 etc;Nominal length:5-200mm;Surface treatment:according to customers' requirements；Zinc plated, Zinc nickel plated, Dacromet, polished, electrophoresis,ect.

GB	GB /T 882 MOD
ISO	ISO 2341
DIN	DIN EN 22341 IDT
EN	EN 22341 IDT
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.