ASME B 18.6.3 (T24) - 2013 Slotted Truss Head Screws [Table 24] (ASTM F837, F468)

Unit:

Thread Size
d

0000#

000#

00#

d	Nominal Size
PP
d_k	max
d_k	min
k	max
k	min
n	max
n	min
t	max
t	min
R	max

0.0210	0.0340	0.0470
160	120	90
0.049	0.077	0.106
0.043	0.071	0.098
0.014	0.022	0.030
0.010	0.018	0.024
0.009	0.013	0.017
0.005	0.009	0.010
0.009	0.013	0.018
0.005	0.009	0.012
0.032	0.051	0.070

②,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread.
③,Machine Screw Length of Thread 1) Sizes No.5 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in. 2) Sizes No.6 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.