DIN 609 - 1995 Hexagon Fit Bolts

Weight Calculator Message Error Correction 中文版

Unit: 毫米(mm)

Thread Size
d

M10

M12

P	Pitch	Coarse thread
		Fine thread-1
		Fine thread-2
b	L≤50
	50＜L≤ 150
	L＞150
d_s	Nominal Size
	min
	max
d₀	min
	max
e	min
k	Nominal Size
	min
	max
k₁	min
r	min
	max
s	max=nominal size
	min

1.25	1.5	1.75
1	1.25	1.25
-	1	1.5
14.5	17.5	20.5
16.5	19.5	22.5
21.5	24.5	27.5
9	11	13
9.001	11.001	13.001
9.01	11.012	13.012
7.9	9.9	11.5
8.2	10.2	11.8
14.38	17.77	19.85
5.3	6.4	7.5
5.15	6.22	7.21
5.45	6.58	7.79
3.61	4.35	5.05
0.4	0.4	0.6
0.55	0.55	0.75
13	16	18
12.73	15.73	17.57

Lg (max)

per 1000 units ≈ kg(7.85kg/cm3)

①,Centering hole Form A or Form R according to DIN 332-1 (centering is only required for screws with addition [larger shank diameter ds], for screws without added [finish screws] it is left to the manufacturer.)

Alternative history DIN 609 - 1984 DIN 609 - 1995 DIN 609 - 2016

Suppliers

Best price if from GlobalFastener.com

Shanghai ATM Precision Fastening Technology Co., Ltd.
Contact:	Xu Hai
Cellphone：	+86-18621311857
QQ：	513543434
email：	asialuosi@163.com
Materials: 301, 302, 303, 304, 304L, 316, 316L, 316Ti, 317L, 310S, 321, 347, 1.4529, 1.4539, 1.4462, 1.4547, 1.4980, 904L, 2205, 2507, 2520, S32750, S32760, 1Cr13, 1Cr17, 2Cr13, 3Cr13, 14Cr17Ni2, 410, 416, 420, 430, 431, 440, 630, 631, 17-4PH, MP35N, 600, 601, 625, 660, 718, 750, 800, 825, 925, 926, C22, C276, A286, GH2132, GH4033, GH4080, GH4169, GH4145, 9C18Mo, 4Cr10Si2Mo, 35CrMoA, 42CrMoA, 40CrNiMoA, 25Cr2Mo1VA, SCM435, SCM440, 4130, 4140, 4145, A36, A307, A320, A325, A490, A574, F1554; stainless steel, alloy steel, titanium alloys, nickel-based alloys, high-temperature alloys, corrosion-resistant alloys, nickel-cobalt alloys, special alloys, and other special materials per customer specifications. Grades: A1-50, A2-50, A2-70, A2-80, A3-70, A4-70, A4-80, A4-90, A4-100, A5-80, B8, B8M, B8C, B8T, B6, B7, B7M, B16, C1-50, C1-70, C1-110, C3-80, C3-120, C4-70, D2-80, D2-100, D4-80, D4-100, D6-80, D6-100, D8-80, D8-100, P1-90, P1-120, F51, F53, F55, F60, 10.9, 12.9, 14.9, 15.9, 16.9; Other grades available upon request. Specifications: M3–M120, 1/4"–4". No limitation on product diameter or length; custom non-standard parts can be manufactured upon request. Surface Treatments: passivation, black oxide, phosphating, electrophoretic coating, zinc plating, nickel plating, chrome plating, cadmium plating, gold plating, silver plating, tin plating, copper plating, zinc diffusion, marine zinc, aluminum diffusion, aluminum spraying, Dacromet, Geomet, Teflon coating, zinc-nickel alloy plating, nickel-cobalt alloy plating, hot-dip galvanizing, ceramic composite coatings, molybdenum disulfide coating, tungsten disulfide coating, nano-coatings, and other surface finishes per customer requirements.