DIN EN 27436 - 1992 Slotted Set Screws With Cup Point

Unit: 毫米(mm)

Thread Size
d

M1.6

M2.5

P	Pitch
d_z	min
	max
n	Nominal Size
	min
	max
t	min
	max
α	max
	min
L₀ ^①

0.35	0.4	0.45
0.55	0.75	0.95
0.8	1	1.2
0.25	0.25	0.4
0.31	0.31	0.46
0.45	0.45	0.6
0.56	0.64	0.72
0.74	0.84	0.95
120°	120°	120°
90°	90°	90°
2	2.5	3

per 1000 units ≈ kg(7.85kg/cm3)

①,When L ≤ L0, it is a short screw; When L>L0, it is a long screw.
②,The 45° angle applies only to the portion of the point below the root diameter of the thread.

Equivalent standard

GB	GB 74
ISO	ISO 7436
DIN	DIN EN 27436
EN	EN 27436
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

GB /T 74 - 2018

Slotted Set Screws with Cup Point
Suppliers(1)

GB 74 - 1985

Slotted Set Screws with Cup Point
Suppliers(1)

DIN 438 - 1986

Slotted set screws with cup piont

ISO 7436 - 1983

Slotted Set Screws With Cup Point

JIS B 1117 (T5) - 2010

Slotted Set Screws With Cup Point

JIS B 1117 (T4) - 1995

Slotted screws with cup point

ASME/ANSI B 18.6.2 - 1998 (R2010)

Slotted set screws with cup point [Table 5] (A307, SAE J429, F468, F593)

EN 27436 - 1992

Slotted Set Screws with Cup Point

NF E 25-163 - 1992 (R2002)

Slotted Set Screws With Cup Point

CNS 4476 - 1981

Slotted Set Screws With Cup Point