DIN 7340 - 2011 Tubular Rivets Cut From The Tube

Unit: 毫米(mm)

Nominal Diameter
d

Φ1
×0.2

Φ1.2
×0.2

Φ1.5
×0.2

d	max
d	min
d₂	Nominal Size
	max
	min
k	≈
s	Nominal Size (±10%)
	max
	min
Recommend Hole Size	Tolerance H12
r	max
z	Exposed Length（ ≈ ）

1.03	1.23	1.53
0.97	1.17	1.47
1.6	2	2.5
1.75	2.15	2.65
1.45	1.85	2.35
0.25	0.3	0.35
0.2	0.2	0.2
0.22	0.22	0.22
0.18	0.18	0.18
1.05	1.25	1.55
0.20	0.20	0.20
0.8	1	1.1

per 1000 units ≈ kg(7.85kg/cm3)

①,Conversion numbers for the weights： St, Stainless Steel : Cu : Cu Zn : Al 1.000：1.134：1.070：0.344
②,Material a)Steel E235/1.0308，E215/1.0212 Standard DIN EN 10305-1 b)Stainless steel X5CrNi18-10/1.4301 Standard DIN EN 10269-2 c)Aluminium(Al): EN AW-Al99.5/EN AW-1050A Standard DIN EN 754-2 d)Copper Zinc Alloy (CuZn): CuZn37/CW508L, CuZn36/CW507L Standard DIN EN 12449 e)Copper(Cu): Cu-DHP/CW024A Standard DIN EN 12449

DIN 7340 - 2011 Tubular Rivets Cut From The Tube

GB 876 - 1986

GB 975 - 1986

DIN 7338 (C) - 2011

DIN 7338 (C) - 1993

DIN 7331 - 2011

DIN 7339 - 2011

DIN 7339 - 1993

DIN 7340 - 1993

Q 465

JB /T 10582 - 2006

YJT 8004