Unit:
毫米(mm) |
| ①,The mechanical properties of the screw as a component of a combination tapping screw must comply with those of ISO 2702. After assembly and heat treatment, the disc must have a hardness of 90 HV to 320 HV.
The Vickers hardness test must be performed according to ISO 6507-1.
Test load: HV 10 for a nominal thickness h ~ 1, 2 mm
Test load: HV 30 for a nominal thickness h> 1, 2 mm
Before assembling appropriate precautions must be taken ②,Designation for screws ISO 1479, hexagon tapping screws, S1 ③,Abbreviation for washers: ISO 10669, Flat washers for combination tapping screws, Normal N, Great L |
