DIN EN ISO 15973 - 2001 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St

Unit: 毫米(mm)

Nominal Diameter
d

Φ3.2

Φ4

Φ4.8

d	max
	min
d_k	max
	min
k	max
d₁	max
L₁	min
Shear load/N(min)
Tensile load/N(min)
Mandrel break load/N(max)

3.28	4.08	4.88
3.05	3.85	4.65
6.7	8.4	10.1
5.8	6.9	8.3
1.3	1.7	2
1.85	2.35	2.77
25	25	27
1100	1600	2200
1450	2200	3100
3500	5000	7000

①,Material: Rivet body made of aluminium alloy (AlA) and a mandrel made of steel (St) . Material specification is at the discretion of the manufacturer. Mechanical properties: The minimum shear load, minimum tensile load and maximum mandrel break load shall be as specified in Table 3 when tested in accordance with ISO 1 4589.

GB /T 12615.1 - 2004

Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 11 - AlA/St
Suppliers(4)

GB /T 12615.2 - 2004

Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 30 - St / St
Suppliers(4)

GB /T 12615.3 - 2004

Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 06 - Al/AlA
Suppliers(4)

GB /T 12615.4 - 2004

Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 51 - A2/SSt
Suppliers(4)

GB /T 12615 - 1990

Mushroom Head Break Mandrel Closed End Blind Rivets
Suppliers(4)

IFI 126 - 2003

Dome Head Style Break Mandrel Closed End Blind Rivets
Suppliers(1)

IFI 509 - 1999

Metric Mushroom Head Break Mandrel Closed End Blind Rivets
Suppliers(1)

ISO 15975 - 2002

Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA
Suppliers(3)

ISO 15976 - 2002

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
Suppliers(3)

ISO 16585 - 2002

Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt
Suppliers(3)

ISO 15973 - 2000

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
Suppliers(3)

Q 442

Mushroom head break mandrel closed end blind rivets
Suppliers(3)

Q 442B

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head
Suppliers(3)

Q 442B (T18)

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - Property Class 11
Suppliers(3)

NF E 25-725 - 2003

Closed End Blind Rivets With Pull Mandrel And Protruding Head - A2/SSt

NF E 25-712 - 2003

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AI/AIA

NF E 25-713 - 2003

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St

NF E 25-710 - 2001

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St

YJT 8036

Dome Head Style Break Mandrel Closed End Blind Rivets

DIN EN ISO 15975 - 2003

Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA

DIN EN ISO 15976 - 2003

Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St

DIN EN ISO 16585 - 2003

Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt

GB	GB /T 12615.1 修改采用 ISO 15973
ISO	ISO 15973
DIN	DIN EN ISO 15973
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.