<< Back

DIN 7500 (NE) - 2009 Cross Recessed Raised Countersunk Head Thread Rolling Screws - Form NE

Weight Calculator Message Error Correction 中文版

Unit: 毫米(mm)
Weight Calculator
Thread Size
d
M2 M2.5 M3
P Pitch
b min
dk max
min
k max=nominal size
Socket No.
0.4 0.45 0.5
25 25 25
3.8 4.7 5.5
3.5 4.4 5.2
1.2 1.5 1.65
0 1 1
①,Material: The thread rolling screws shall be made from cold heading, case hardening quality steel. The core hardness shall be 290 HV 10 to 370 HV 10, and the case hardness shall be 450 HV 0,3 minimum. According to DIN EN ISO 7085
Alternative history DIN 7500N - 1984 DIN 7500NE - 1995 DIN 7500NE - 2009
Equivalent standard
DIN DIN 7500(NE)
UNI UNI 8114
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

I want to purchase I can supply
Similar Products & Suppliers
Cross Recessed Raised Countersunk Head Thread Forming Screws

GB /T 6562 - 2014

Cross Recessed Raised Countersunk Head Thread Forming Screws

Cross Recessed Raised Countersunk Head Thread Forming Screws

GB /T 6562 - 1986

Cross Recessed Raised Countersunk Head Thread Forming Screws

Cross Recessed Raised Countersunk Head Thread Rolling Screws

DIN 7500 (NE) - 1995

Cross Recessed Raised Countersunk Head Thread Rolling Screws

Cross Recessed Raised Countersunk Head Thread Rolling Screws

DIN 7500 (N) - 1984

Cross Recessed Raised Countersunk Head Thread Rolling Screws

Cross recessed raised countersunk head thread forming screws

Q 264

Cross recessed raised countersunk head thread forming screws

Cross Recessed Raised Countersunk Head Forming Screws

UNI 8114

Cross Recessed Raised Countersunk Head Forming Screws

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows