DIN 7977 - 1977 Taper Pins With Thread And Constant Thread Part

Unit: 毫米(mm)

Nominal Diameter
d

per 1000 units ≈ kg(7.85kg/cm3)

①,The tolerance field h13 is specified in the DIN 78 - 1983 standard and h14 is specified in the ISO 4753 - 1983 standard.

Equivalent standard

GB	GB /T 881
ISO	ISO 8737
DIN	DIN EN 28737
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

Taper Pins With External Thread

Taper Pins With External Thread

Clevis pins with head and external thread

Taper Pins With Thread Ends And Constant Taper Lengths

Taper pins with thread ends and constant taper lengths

Taper Pins With External Thread

Taper pins with thread ends and constant taper lengths

Taper Pins With External Thread,Unhardened

Taper Pins With Dog Point And Ball Face

Taper Pins With Thread And Constant Taper Length

Taper Pins With External Thread, Unhardened

Taper Pins With Thread

Taper Pins With Thread

Unhardened Taper Pins with External Thread