![]() Unit:
毫米(mm) |
①,For this size, no specifications have been made for the residual spring force in DIN 267 part 26. ②,For this size, no specifications have been made for permanent set in DIN 267 part 26 ③,The tolerances specified apply to the washer in the flat-pressed condition. ④,As specified in DIN 267-26 ⑤,Technical delivery conditions: Washers shall be made of spring steel (FSt) and comply with the technical delivery conditions specified in DIN 267-26 |
Best price if from GlobalFastener.com |
Contact: | Mr. Xiong |
Cellphone: | +86-13928467909 |
QQ: |
![]() |
email: | szjydwj@126.com |
Material: S60C, SUS304, 316 (A2/A4) high quality steel imported from Japan. Surface treatment: nature, harden, black phosphating, dehydrogenation, zinc plated, dacromet, electroplating, etc.; Specification: complete |
Wave Single Coil Spring Lock Washers
Wave Spring Washers
Suppliers(2)
Wave Spring Washers
Suppliers(1)
Wave Spring Lock Washers
Wave Spring Washers
Suppliers(1)
Spring Washers for Axial Adjustment of Ball Bearings of Small Motors
Curved Spring Lock Washers [Table 13] WW/No.3
Curved Spring Lock Washers [Table 8] WW/No.3
Wave Spring Washers
Suppliers(1)
Steel Undee Spring Used in Electric Machines
Suppliers(1)
Crinkle Washers - For General Engineering Purposes - Metric Series
Wave Spring Lock Washers
Suppliers(1)
Wave Spring Washers for Mechanical and Electronic
Suppliers(1)
Stainless Steel Wave Spring Washers - Type B