方法一：产品分类(大小类)+标准类别
[美标]ASTM F 436 - 2024
英制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈、特厚垫圈]
Hardened Circular, Clipped Circular, and Extra, Inch Washers
[美标]ASTM F 436 - 2024
英制方斜垫圈和剪切方斜垫圈
Hardened Beveled Washers, Inch Washers
[美标]ASTM F 436M - 2024
米制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Metric Hardened Steel Washers
[美标]ASTM F 436M - 2024
米制方斜垫圈和剪切方斜垫圈
Metric Hardened Beveled Washers
[美标]ASTM F 436 - 2019
英制方斜垫圈和剪切方斜垫圈
Hardened Beveled Washers, Inch Washers
[美标]ASTM F 436 - 2019
英制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈、特厚垫圈]
Hardened Circular, Clipped Circular, and Extra, Inch Washers
[美标]ASTM F 436M - 2019
米制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Metric Hardened Steel Washers
[美标]ASTM F 436M - 2019
米制方斜垫圈和剪切方斜垫圈
Metric Hardened Beveled Washers
[美标]ASTM F 959 - 2017 (a)
英制栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners，Inch Series
[美标]ASTM F 959M - 2017 (a)
米制栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners，Metric Series
[美标]ASTM F 436 - 2011
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈、特厚垫圈]
Hardened Circular, Clipped Circular, and Extra-thick Washers
[美标]ASTM F 436 - 2011
方斜垫圈和剪切方斜垫圈
Hardened Beveled Washers
[美标]ASTM F 436 - 2010
工字钢用方斜垫圈
Square Hardened Beveled Washers
[美标]ASTM F 436M - 2010
米制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Metric Hardened Steel Washers
[美标]ASTM F 959 - 2005 (a)
栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-washer-type Diredt Tension Indicators for Use with Structual Fasteners
[美标]ASTM F 436 - 1993 (R2000)
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Circular and Clipped Circular Washers - Hardened Steel Washers
[美标]ASTM F 436 (M) - 1993
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]-[公制]
Hardened Steel Washers
[美标]ASTM F 3394 - 2023
支撑垫圈（英寸）
Backup Washer （Inch）
[美标]ASTM F 3394 (M) - 2023
公制支撑垫圈
Backup Washer (Metric)
[美标]ASTM F 3394 - 2023
反作用垫圈（英寸）
Reaction Washer（Inch）
[美标]ASTM F 3394 (M) - 2023
公制反作用垫圈
Reaction Washer (Metric)
[美标]ASTM
热交换器用六角螺堵
Hex Head Plug for Heat Exchanger
[美标]ASTM A320/A320M - 2021
低温用合金钢螺栓材料标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
[美标]ASTM A193/A193M - 2020
高温或高压及其他特殊用途用合金钢和不锈钢螺栓
Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
[美标]ASTM A193/A193M - 2019
高温设备用合金钢和不锈钢螺栓材料的标准规范
Alloy-steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
[美标]ASTM A320/A320M - 2018
低温用合金钢螺栓材料标准规范
Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
[美标]ASTM A325 - 2014
经热处理的钢结构螺栓，最小抗拉强度120/105ksi
Structural Bolts, Steel, Heat Treated 120/105 Ksi Minimum Tensile Strength
[美标]ASTM A320/A320M - 2011
低温条件下使用的合金钢、不锈钢栓接材料
Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
[美标]ASTM A325M - 2009
经热处理的最小抗拉强度为830 MPa的钢制结构螺栓规格（米制）
Standard Specification for Structural Bolts,Steel,Heat Treated 830MPa Minmum Tensile Strength (Metric)
[美标]ASTM A193/A193M - 2001
高温设备用合金钢和不锈钢螺栓材料的标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Servise
[美标]ASTM A 648 - 2025
预应力混凝土管用硬拉钢丝标准规范
Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
[美标]ASTM A 839 - 2025
软磁应用铁磷粉末冶金零件标准规范
Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
[美标]ASTM A178/A178M - 2025
电阻焊碳钢锅炉过热器管
Electric-Resistance-Welded Carbon Steel and Carbon- Manganese Steel Boiler and Superheater Tubes
[美标]ASTM A214/A214M - 2025
电阻焊接碳钢热交换器和冷凝器管
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
[美标]ASTM A387/A387M - 2025
压力容器用铬钼合金钢板
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
[美标]ASTM A513/A513M - 2025
机械用电阻焊碳钢和合金钢管
Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
[美标]ASTM A649/A649M - 2025
瓦楞造纸机械用锻钢辊标准规范
Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
[美标]ASTM A710/A710M - 2025
沉淀强化低碳镍铜铬钼铌合金结构钢板的标准规范
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel- Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
[美标]ASTM A774/A774M - 2025
低温和中温下一般腐蚀性环境用焊接锻造奥氏体不锈钢配件标准规范
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
[美标]ASTM A829/A829M - 2025
合金结构钢板标准规范
Standard Specification for Alloy Structural Steel Plates
[美标]ASTM A832/A832M - 2025
铬钼钒合金钢压力容器板标准规范
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
[美标]ASTM A915/A915M - 2025
类似于标准锻造等级的碳素钢和合金钢铸件化学要求的标准规范
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
[美标]ASTM A965/A965M - 2025
压力和高温零件用奥氏体钢锻件标准规范
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
[美标]ASTM A989/A989M - 2025
高温设备用热等静压合金钢法兰、配件、阀门和零件的标准规范
Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
[美标]ASTM B333 - 2025
镍钼合金厚板、薄板和带材
Nickel-Molybdenum Alloy Plate, Sheet, and Strip
[美标]ASTM B818 - 2025
钴铬镍钼钨合金板、薄板及带材
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy Plate, Sheet and Strip
[美标]ASTM A 536 - 2024
球墨铸铁件的标准规范
Standard Specification for Ductile lron Castings
[美标]ASTM A 713 - 2024
热处理部件用高碳弹簧钢丝标准规范
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
[美标]ASTM A 838 - 2024
继电器用易切削铁素体不锈钢软磁合金棒的标准规范
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
[美标]ASTM A 867 - 2024
铁硅继电器钢标准规范
Standard Specification for Iron-Silicon Relay Steels
[美标]ASTM A192/A192M - 2024
高压无缝碳钢锅炉管
Seamless Carbon Steel Boiler Tubes for High-Pressure Service
[美标]ASTM A266/A266M - 2024
压力容器用碳钢锻件
Carbon Steel Forgings for Pressure Vessel Components
[美标]ASTM A283/A283M - 2024
低、中抗拉强度碳钢板
Low and Intermediate Tensile Strength Carbon Steel Plates
[美标]ASTM A335/A335M - 2024 (b)
高温用铁素体合金钢无缝管
Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
[美标]ASTM A358/A358M - 2024
高温设备与通用设备用电熔焊奥氏体铬镍不锈钢管
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
[美标]ASTM A414/A414M - 2024
压力容器用高强度低合金钢板
Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
[美标]ASTM A519/A519M - 2024
机械用无缝碳钢管、合金钢管的标准规范
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
[美标]ASTM A53/A53M - 2024
黑铁管、热浸镀锌焊管和无缝管
Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
[美标]ASTM A533/A533M - 2024
锰钼和锰钼镍淬火和回火合金钢压力容器板标准规范
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and ManganeseMolybdenum-Nickel
[美标]ASTM A540/A540M - 2024
特殊用途合金钢螺栓连接材料标准规范
Alloy-steel Bolting for Special Applications
[美标]ASTM A592/A592M - 2024
压力容器用高强度调质低合金钢锻件标准规范
Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
[美标]ASTM A646/A646M - 2024
飞机和航空航天锻件用优质合金钢坯料和钢坯的标准规范
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
[美标]ASTM A656/A656 - 2024
改善成形性热轧高强度低合金结构钢板
Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
[美标]ASTM A666/A666M - 2024
退火或冷加工奥氏体不锈钢薄板、带材、中厚板和扁钢的标准规范
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
[美标]ASTM A679/A679M - 2024
冷拔高抗拉强度钢丝标准规范
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
[美标]ASTM A684/A684M - 2024
冷轧高碳钢带标准规范
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
[美标]ASTM A758/A758M - 2024
提高缺口韧性的锻制碳钢对接焊接管件标准规范
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
[美标]ASTM A765/A765M - 2024
具有强制性韧性要求的碳钢和低合金钢压力容器部件锻件标准规范
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
[美标]ASTM A778/A778M - 2024
焊接、未退火奥氏体不锈钢管状产品的标准规范
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
[美标]ASTM A787/A787M - 2024
电阻焊接金属涂层碳钢机械管标准规范
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
[美标]ASTM A789/A789M - 2024
一般用途无缝和焊接铁素体-奥氏体不锈钢管
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
[美标]ASTM A790/A790M - 2024
无缝和焊接铁素体/奥氏体不锈钢管标准规范
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
[美标]ASTM A794/A794M - 2024
商业用钢（CS）冷轧碳钢板（碳 0.16% ~ 0.25%）标准规范
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
[美标]ASTM A813/A813M - 2024
单面或双面焊接奥氏体不锈钢管标准规范
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
[美标]ASTM A815/A815M - 2024
锻造铁素体、铁素体/奥氏体和马氏体不锈钢管道配件标准规范
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
[美标]ASTM A827/A827M - 2024
锻造和类似用途用的碳钢板材标准规范
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
[美标]ASTM A830/A830M - 2024
符合化学成分要求的结构质量碳钢板材标准规范
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
[美标]ASTM A858/A858M - 2024
低温和腐蚀性环境用热处理碳钢配件标准规范
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
[美标]ASTM A860/A860M - 2024
锻造高强度铁素体钢对焊管件标准规范
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
[美标]ASTM A891/A891M - 2024
涡轮机转子盘和叶轮用沉淀硬化铁基高温合金锻件的标准规范
Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels