方法一：产品分类(大小类)+标准类别
[国标]GB /T 1231 (washer) - 2024
钢结构用高强度垫圈
High Strength Plain Washers for Steel Structural
[国标]GB /T 896 - 2020
开口挡圈
“E” Rings
[国标]GB /T 305 - 2019
滚动轴承用止动环 - 尺寸系列18、尺寸系列19
Rolling Bearings-Snap Ring
[国标]GB /T 893 (A) - 2017
孔用弹性挡圈 A型（标准型）
Retaining Rings for Bores - Type A (Standard)
[国标]GB /T 893 (B) - 2017
孔用弹性挡圈 B型（重型）
Retaining Rings for Bores - Type B (Heavy)
[国标]GB /T 894 (A) - 2017
轴用弹性挡圈 标准型（A型）
Retaining Rings for Shaft - Type A (Standard)
[国标]GB /T 894 (B) - 2017
轴用弹性挡圈 B型 (重型)
Retaining Rings for Shaft - Type B (Heavy)
[国标]GB /T 956.3 - 2017
锥形弹性垫圈
Conical Spring Washers
[国标]GB /T 3632 (H) - 2008
钢结构用扭剪型高强度螺栓用垫圈
Torshear type plain washer for steel structures
[国标]GB /T 1230 - 2006
钢结构用高强度垫圈
High Strength Plain Washers for Steel Structural
[国标]GB /T 5287 - 2002
C级特大垫圈
Plain Washers - Extra Large Serles - Product Grade C
[国标]GB /T 848 - 2002
A级小垫圈
Plain Washers - Small Series - Product Grade A
[国标]GB /T 95 - 2002
平垫圈 C级
Plain Washers - Product Grade C
[国标]GB /T 96.1 - 2002
大垫圈 A级
Plain Washers - Large Series - Product Grade A
[国标]GB /T 96.2 - 2002
大垫圈 C级
Plain Washers - Large Series - Product Grade C
[国标]GB /T 97.1 - 2002
平垫圈 A级
Plain Washers - Product Grade A
[国标]GB /T 97.2 - 2002
平垫圈 倒角型 A级
Plain Washers, Chamfered - Product Grade A
[国标]GB /T 97.4 (S) - 2002
S型（小）平垫圈 用于螺钉组合件
Plain Washers（Small） For Combination Screw
[国标]GB /T 97.4 (N) - 2002
N型（标准）平垫圈 用于螺钉组合件
Plain Washers（Normal） For Combination Screw
[国标]GB /T 97.4 (L) - 2002
L型（大）平垫圈 用于螺钉组合件
Plain Washers（Large）for Combination Screw
[国标]GB /T 97.5 (N) - 2002
N型 平垫圈 用于自攻螺钉和垫圈组合件
Plain Washers For Tapping Screw And Washer Assemblies - Type N
[国标]GB /T 97.5 (L) - 2002
L型 平垫圈 用于自攻螺钉和垫圈组合件
Plain Washers For Tapping Screw And Washer Assemblies - Type L
[国标]GB /T 18230.5 - 2000
栓接结构用平垫圈（淬火并回火）
Plain Washers For High-Strength Structural Bolting Hardened And Tempered
[国标]GB /T 97.3 - 2000
销轴用平垫圈
Plain Washers For Clevis Pins
[国标]GB /T 305 - 1998
滚动轴承用止动环 - 尺寸系列18、尺寸系列19
Rolling Bearings-Snap Ring
[国标]GB /T 3632 (W) - 1995
钢结构用扭剪型高强度平垫
Torshear type plain washer for steel structures
[国标]GB /T 1230 - 1991
钢结构用高强度垫圈
High strength plain washers for steel structures
[国标]GB 305 - 1989
滚动轴承用止动环 - 尺寸系列18、尺寸系列19
Rolling Bearings - Snap Ring
[国标]GB 849 - 1988
球面垫圈
Washers With Ball Face
[国标]GB 850 - 1988
锥面垫圈
Washers With Cone Face
[国标]GB 851 - 1988
开口垫圈
Washers With Split
[国标]GB 852 - 1988
工字钢用方斜垫圈
Square Taper Washers For I Section
[国标]GB /T 853 - 1988
槽钢用方斜垫圈
Square Taper Washers For Slot Section
[国标]GB 854 - 1988
单耳止动垫圈
Tab Washers With Long Tab
[国标]GB 855 - 1988
双耳止动垫圈
Tab Washers With Long Tab And Wing
[国标]GB 856 - 1988
外舌止动垫圈
External Tab Washers
[国标]GB 858 - 1988
圆螺母用止动垫圈
Tab Washers For Round Nuts
[国标]GB 9074.24 - 1988
组合件用平垫圈
Plain Washers For Assembly
[国标]GB 9074.25 - 1988
组合件用大垫圈
Blg Plain Washer For Assembly
[国标]GB 9074.26 - 1988
组合件用弹簧垫圈
Single Coil Spring Lock Washer For Assembly
[国标]GB 9074.27 - 1988
组合件用外锯齿锁紧垫圈
Serrated Lock Washer External Teeth For Assembly
[国标]GB 9074.28 - 1988
组合件用锥形锁紧垫圈
Lountersunk External Toothed Lock Washer For Assembly
[国标]GB 9074.29 - 1988
自攻螺钉组合件用平垫圈
Samll Washer For Tapping Screw Assembly
[国标]GB 9074.30 - 1988
自攻螺钉组合件用大垫圈
Blg Washer For Tapping Screws Assembly
[国标]GB 7244 - 1987
重型弹簧垫圈
Single Coil Spring Lock Washers Heavy Type
[国标]GB 7245 - 1987
鞍形弹簧垫圈
Curved Single Coil Spring Lock Washers
[国标]GB 7246 - 1987
波形弹簧垫圈
Wave Single Coil Spring Lock Washers
[国标]GB 859 - 1987
轻型弹簧垫圈
Single Coil Spring Lock Washers,Light Type
[国标]GB 860 - 1987
鞍形弹性垫圈
Curved Spring Washers
[国标]GB 861.1 - 1987
内齿锁紧垫圈
Lock Washers Internal Teeth
[国标]GB 861.2 - 1987
内锯齿锁紧垫圈
Serrated Lock Washers Internal Teeth
[国标]GB 862.1 - 1987
外齿锁紧垫圈
Lock Washers External Teeth
[国标]GB 862.2 - 1987
外锯齿锁紧垫圈
Serrated Lock Washers External Teeth
[国标]GB /T 93 - 1987
标准型弹簧垫圈
Single Coil Spring Lock Washers, Normal Type
[国标]GB /T 955 - 1987
波形弹性垫圈
Wave Spring Washers
[国标]GB 956.1 - 1987
外齿锥形锁紧垫圈
Countersunk External Toothed Lock Washers
[国标]GB 956.2 - 1987
锥形锯齿锁紧垫圈
Countersunk Serrated External Toothed Lock Washers
[国标]GB 884 - 1986
螺钉锁紧挡圈
Lock Rings with Screws
[国标]GB 885 - 1986
带锁圈的螺钉锁紧挡圈
Lock Rings with Screw and Circlip
[国标]GB 891 - 1986
螺钉紧固轴端挡圈
Lock Rings at the end of Shaft with Screw
[国标]GB 892 - 1986
螺栓紧固轴端挡圈
Lock Rings at the end of Shaft with Bolt
[国标]GB /T 893.1 - 1986
孔用弹性挡圈 A型
Circlips for Holes - Type A
[国标]GB /T 893.2 - 1986
孔用弹性挡圈 B型
Circlips for Holes - Type B
[国标]GB /T 894.1 - 1986
轴用弹性挡圈 A型
Circlips for Shaft - Type A
[国标]GB /T 894.2 - 1986
轴用弹性挡圈 B型
Circlips for Shaft - Type B
[国标]GB /T 895.1 - 1986
孔用钢丝挡圈
Round Wire Snap Rings for Hole
[国标]GB 895.2 - 1986
轴用钢丝挡圈
Round Wire Snap Rings for Shaft
[国标]GB 896 - 1986
开口挡圈
“E” Rings
[国标]GB 921 - 1986
钢丝锁圈
Round Wire Circlips
[国标]GB 960 - 1986
夹紧挡圈
Grip Rings
[国标]GB /T 5287 - 1985
C级特大垫圈
Plain Washers - Extra Large Series - Product Grade C
[国标]GB /T 848 - 1985
A级小垫圈
Grade A small washers
[国标]GB /T 95 - 1985
C级平垫圈
Plain Washers - Product Grade C
[国标]GB 96 - 1985
大垫圈 A级和C级
Plain Washers-Large Series - Product Grade A and C
[国标]GB /T 97.1 - 1985
A级平垫圈
Grade A plain washers
[国标]GB /T 97.2 - 1985
A级倒角型平垫圈
Grade A chamferred plain washers
[国标]GB 93 - 1976
弹垫
Single coil spring lock washers,Normal type
[国标]GB 97 - 1976
平垫
Plain Washers
[汽标代号]Q 400
小垫圈
Small washers
[汽标代号]Q 400B
小垫圈
Small Washers