会员中心 | English

铝帽铝芯封闭型圆头抽芯铆钉 ISO 15975 - 2002

选择规格尺寸点击↓

Φ3.2

Φ4

Φ4.8

尺寸单位: mm

国际ISO 15975 - 2002 ISO15975 15975ISO 铝帽铝芯封闭型圆头抽芯铆钉

扫一扫分享

单重计算公差

公称直径
d

Φ3.2

Φ4

Φ4.8

d	最大值
	最小值
d_k	最大值
	最小值
k	最大值
d₁	最大值
L₁	最小值
剪切载荷/N(min)
拉力载荷/N(min)
钉芯断裂载荷/N(max)

3.28	4.08	4.88
3.05	3.85	4.65
6.7	8.4	10.1
5.8	6.9	8.3
1.3	1.7	2
1.85	2.35	2.77
25	25	27
460	720	1000
540	760	1400
1780	2670	3560

推荐的铆接范围

替代列表

暂无

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 12615.3 修改采用 ISO 15975:2002	ISO 15975	DIN EN ISO 15975

以上有部分标准可能为近似等效，如有异议以标准原件为准

工艺相关

ISO 3269

紧固件验收检查

技术条件和引用标准

材料
表面处理
表面缺陷
验收及包装

Blind rivets made in accordance with this International Standard shall have a rivet body made of commercially pure aluminium (Al) and a mandrel made of aluminium alloy (AIA).
Material specification is at the discretion of the manufacturer.

The surface of rivet body and mandrel shall be plain i.e. in natural finish.

Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.

ISO 3269

引用参考

GB /T 1172

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

上海承泰金属五金制造有限公司

联系人：诸葛鸿满

2880137050 点击这里给我发消息

2880137059 移动电话： 18916049888 电话：021-59742477/59740118 Email:

登陆后可见

材质：不锈钢、铝、碳钢；规格：齐全；表面处理：根据客户要求

[询价]

慈溪市钉晟紧固件有限公司

联系人：励晨莹/励家豪点击这里给我发消息

469369214 移动电话： 15158363879/18258728198 电话：15158363879/18258728198 微信号：15158363879/18258728198 Email:

登陆后可见

材质：不锈钢，全铁，铝等；规格尺寸齐全；表面处理可根据客户需求，现货充足。

[询价]

宁波超鑫铆钉制造有限公司

联系人：吴铁洲移动电话： 15906744333 电话：0574-63313978 Email:

登陆后可见

材料：铜、铝、铁、不锈钢；规格：齐全；表面处理：按照客户的要求

[询价]

类似标准及供货信息

1	[国标] GB /T 12615.1 - 2004	封闭型平圆头抽芯铆钉 11级（铝钉，钢芯） Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 11 - AlA/St 供应商(7)
2	[国标] GB /T 12615.2 - 2004	封闭型平圆头抽芯铆钉 30级钢制 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 30 - St / St 供应商(7)
3	[国标] GB /T 12615.3 - 2004	封闭型平圆头抽芯铆钉 06级铝制 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 06 - Al/AlA 供应商(7)
4	[国标] GB /T 12615.4 - 2004	封闭型平圆头抽芯铆钉 51级不锈钢 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 51 - A2/SSt 供应商(7)
5	[国标] GB /T 12615 - 1990	封闭型扁圆头抽芯铆钉 Mushroom Head Break Mandrel Closed End Blind Rivets 供应商(7)
6	[美标] IFI 126 - 2003	封闭型圆头抽芯铆钉 Dome Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
7	[美标] IFI 509 - 1999	米制封闭型圆头抽芯铆钉 Metric Mushroom Head Break Mandrel Closed End Blind Rivets 供应商(1)
8	[国际] ISO 15976 - 2002	铁帽铁芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St 供应商(4)
9	[国际] ISO 16585 - 2002	全不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt 供应商(3)
10	[国际] ISO 15973 - 2000	铝帽铁芯封闭型半圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St 供应商(4)
11	[汽标代号] Q 442	封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets 供应商(3)
12	[汽标代号] Q 442B	封闭型平圆头抽芯铆钉 06级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head 供应商(3)
13	[汽标代号] Q 442B (T18)	封闭型平圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - Property Class 11 供应商(3)
14	[法国] NF E 25-725 - 2003	不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head - A2/SSt 供应商(1)
15	[法国] NF E 25-712 - 2003	铝帽铝芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AI/AIA
16	[法国] NF E 25-713 - 2003	铁帽铁芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
17	[法国] NF E 25-710 - 2001	铝帽铁芯封闭型半圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
18	[企标] YJT 8036	封闭型圆头抽芯铆钉 Dome Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
19	[德标] DIN EN ISO 15975 - 2003	铝帽铝芯封闭型圆头抽芯铆钉 Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA
20	[德标] DIN EN ISO 15976 - 2003	铁帽铁芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
21	[德标] DIN EN ISO 16585 - 2003	全不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt
22	[德标] DIN EN ISO 15973 - 2001	铝帽铁芯封闭型半圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St