航天航空 - 盘头螺钉 偏十字槽 紧公差 普通杆 短螺纹 合金 镀镉 - 等级：1100MPa(室温)/235℃ EN 2897 - 1996
千件重及价格计算
千件重 :
kg x
元/kg =
元/千件
默认密度
g/cm3
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,D₅ 为可选形式。 ②,S处形状可选 。 ③,适用于没有孔的螺钉。 ④,Increments:(1 for L₁ ≤ 30, 2 for 30 < L₁ ≤ 100, 4 for L₁ > 100). If greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length L₁, completed by one or two zeros to the left, where necessary, to obtain a three digit code. ⑤,Value for head and first L₄. ⑥,Increase for each additional millimetre of L₄. ⑦,十字槽相关参数参见 ISO 7994。 |
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 818 - 2016 |
十字槽盘头螺钉 Pan Head Screws with Cross Recess 供应商(14) |
| 2 |
|
[国标] GB /T 823 - 2016 |
十字槽小盘头螺钉 Small Pan Head Screws with Cross Recess 供应商(4) |
| 3 |
|
[国标] GB /T 818 - 2000 |
十字槽盘头螺钉 Pan Head Screws with Cross Recess 供应商(14) |
| 4 |
|
[国标] GB 823 - 1988 |
十字槽小盘头螺钉 Cross Recessed Small Pan Head Screws 供应商(4) |
| 5 |
|
[国标] GB 818 - 1985 |
十字槽盘头螺钉 Cross Recessed Pan Head Screws 供应商(14) |
| 6 |
|
[国标] GB 818 - 1976 |
十字槽盘头螺钉 Cross Recessed Pan Head Screws 供应商(14) |
| 7 |
|
[德标] DIN 967 - 2018 |
十字槽盘头凸缘螺钉 A级 Cross Recessed Pan Head Screws with Collar - Product Grade A 供应商(1) |
| 8 |
|
[德标] DIN 967 - 2002 |
十字槽盘头凸缘螺钉 A级 Cross Recessed Pan Head Screws with Collar - Product Grade A 供应商(1) |
| 9 |
![十字槽球面(矮)圆柱头[盘头]螺钉](http://img.164580.com/upload/48/pic/2023/12/27/1703660710850375809.jpg)
|
[德标] DIN 7985 - 1990 |
十字槽球面(矮)圆柱头[盘头]螺钉 Cross Recessed Raised Cheese Head Screws 供应商(6) |
| 10 |
|
[德标] DIN 6929 (CE) - 2013 |
粗牙十字槽盘头细杆螺钉 Pan Head Screws With Cross Recess |
| 11 |
|
[国际] ISO 7045 - 2011 |
A级十字槽盘头螺钉 H型或Z型 Pan Head Screws With Type H Or Type Z Cross Recess-Product Grade A 供应商(3) |
| 12 |
|
[国际] ISO 7045 - 1994 |
十字槽盘头螺钉 Pan head screws with type H or type Z cross recess- Product grade A 供应商(3) |
| 13 |
|
[日标] JIS B 1111 (T3) - 2017 |
十字槽盘头螺钉 [表3] Cross Recessed Pan Head Screws 供应商(2) |
| 14 |
|
[日标] JIS B 1111 (T1) - 2006 |
十字槽盘头螺钉 [表1] Cross Recessed Pan Head Screws 供应商(2) |
| 15 |
|
[日标] JIS B 1111 (T1) - 1996 |
十字槽盘头螺钉 [表1] Cross recessed pan head screws 供应商(2) |
| 16 |
|
[日标] JIS B 1111 (JA3) - 2017 |
十字槽盘头螺钉 [附属表 JA.3] Cross Recessed Pan Head Screws |
| 17 |
![十字槽盘头螺钉 [附属表1]](http://img.164580.com/upload/48/pic/2024/03/25/1711356423736252236.jpg)
|
[日标] JIS B 1111 (A1) - 2006 |
十字槽盘头螺钉 [附属表1] Cross Recessed Pan Head Screws |
| 18 |
|
[日标] JIS B 1111 (A1) - 1996 |
十字槽盘头螺钉 [附属表1] Cross recessed pan head screws |
| 19 |
|
[日标] JIS B 1119 (2P) - 1986 |
眼镜框架用 - 十一字槽盘头螺钉 Spectacle Frames - Cross-recessed Slotted Pan Head Machine Screws |
| 20 |
|
[汽标代号] Q 214 |
十字槽盘头螺钉 Cross recessed pan head screws 供应商(1) |
| 21 |
|
[美标] ASME/ANSI B 18.6.3 - 2010 |
十字槽盘头螺钉Table18 Cross recessed pan head machine screws 供应商(4) |
| 22 |
|
[美标] ASME/ANSI B 18.6.7M - 1998 |
米制十字槽盘头螺钉Table11 Metric cross recessed pan head screws |
| 23 |
|
[美标] ASME/ANSI B 18.6.7M - 1998 |
米制米字槽盘头螺钉Table12 Metric PZ Drives pan head screws |
| 24 |
|
[欧标] EN 2884 - 2024 |
航天航空 - 盘头螺钉 偏十字槽 光杆公差h12 短螺纹 钛合金 阳极氧化 MoS2润滑 - 等级：1100MPa(室温)/315℃ Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃ |
| 25 |
|
[欧标] EN 2884 - 1996 |
航天航空 - 盘头螺钉 偏十字槽 光杆公差h12 短螺纹 钛合金 阳极氧化 MoS2润滑 - 等级：1100MPa(室温)/315℃ Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃ |
| 26 |
|
[意大利] UNI 7687 |
十字槽盘头螺钉 Recessed Raised Cheese (Filister) Head Screws - ISO Metric Coarse Thread - Product Grade A |
| 27 |
|
[法国] NF E 25-121 - 1994 |
十字槽盘头螺钉 Pan Head Screws With Type H Or Type Z Cross Recess - Product A |
| 28 |
|
[英标] BS 1981 - 1991 |
米字槽盘头螺钉Table12 Cross Recessed Pan Head Machine Screws |
| 29 |
|
[英标] BS 450 - 1958 |
英制十字槽盘头螺钉 - B.S.W. & B.S.F. 螺纹 [Table 5] Cross Recessed Pan Head Screws with B.S.W. & B.S.F. Threads [Table 5] |
| 30 |
|
[澳标] AS /NZS 1427 - 1996 |
米制十字槽盘头螺钉 ISO metric cross-recess pan head screws |
| 31 |
|
[原电子工业部] SJ 2828 - 1987 |
十字槽盘头螺钉 Cross recessed pan head screws |
| 32 |
|
[台湾] CNS 9674 - 1988 |
十字槽盘头螺钉 Cross Recessed Pan Head Screws |
| 33 |
|
[台湾] CNS 9677 - 1988 |
十字槽圆顶盘头螺钉 Corss Recessed Oval Pan Head Machine Screws |
| 34 |
|
[韩标] KS B 1023 (T6) - 2016 (R2021) |
十字槽盘头螺钉 Pan head screws with type H or type Z cross recess- Product grade A |
| 35 |
|
[韩标] KS B 1023 (T1) - 2001 |
十字槽盘头螺钉 Cross Recessed Pan Head Screws |
| 36 |
|
[德标] DIN EN ISO 7045 - 2011 |
十字槽盘头螺钉 - 产品等级A级 Pan Head Screws With Type H or Type Z Cross Recess- Product Grade A 供应商(6) |
| 37 |
|
[印标] IS 7483 - 2005 |
十字槽盘头螺钉 A级 Pan Head Screws with Type H or Z Cross Recess - Product Grade A |
| 38 |
|
[美标] ASME B 18.6.3 (H5B-I/H5C-IA) - 2024 |
十字槽盘头螺钉 (ASTM F837, F468) Type I Cross Recessed Pan Head Screws (ASTM F837, F468) 供应商(4) |
| 39 |
|
[美标] ASME B 18.6.3 (T18-I/T19-IA) - 2013 |
十字槽盘头螺钉 [Table 18] (ASTM F837, F468) Dimensions of Type I Cross Recessed Pan Head Screws (ASTM F837, F468) 供应商(4) |
| 40 |
|
[航天] QJ 2376 - 1992 |
十字槽盘头螺钉 Cross recessed pan head screws |
| 41 |
|
[深圳紧固件行业协会标准] T/SZJGJ 001 (F) - 2024 |
十字槽盘头机器螺钉 Pan Head Screws With Cross Recess |
© 易紧通 服务热线：4006-164580（免长途费）