六角头头部带孔螺栓 QJ 2365 - 1992
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,b值：带“ * ”记号，螺杆上全部制出螺纹，此时最末一扣完整螺纹至支承面的距离应不大于3倍螺距。 |
技术条件和引用标准
|
|
|||||||||||||||||||||||||||||||||||
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 32.1 - 2020 |
六角头头部带孔螺栓 Hexagon Bolts With Wire Holes On Head 供应商(8) |
| 2 |
|
[国标] GB /T 32.3 - 2020 |
六角头头部带孔螺栓 细牙 Hexagon Bolts With Wire Holes On Head - Fine Pitch Thread 供应商(1) |
| 3 |
|
[国标] GB 32.1 - 1988 |
六角头头部带孔螺栓 A和B级 Hexagon Bolts With Wire Hole On Head-Product Grade A and B 供应商(8) |
| 4 |
|
[国标] GB 32.2 - 1988 |
细杆 B级 六角头头部带孔螺栓 Hexagon Bolts With Wire Holes On Head - Reduced Shank - Product Grade B 供应商(1) |
| 5 |
|
[国标] GB 32.3 - 1988 |
六角头头部带孔螺栓 细牙 A和B级 Hexagon Bolts With Wire Holes On Head-fine Pitch Thread-product Grade A And B 供应商(1) |
| 6 |
|
[国标] GB 25 - 1976 |
小六角头部带孔螺栓 Bolts, Small Hexagon Head With Holes Through The Head 供应商(1) |
| 7 |
|
[国标] GB 26 - 1976 |
小六角头头部带孔导颈螺栓 Bolts, Small Hexagon Head With Fit Neck And Holes Through The Head |
| 8 |
|
[汽标代号] Q 170 |
六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 9 |
|
[汽标代号] Q 170B |
六角头头部带孔螺栓 [粗牙普通螺纹] Hexagon bolts with wire hole on head |
| 10 |
|
[汽标代号] Q 171 |
细牙六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 11 |
|
[汽标代号] Q 171B |
六角头头部带孔螺栓 [细牙普通螺纹] Hexagon bolts with wire hole on head |
| 12 |
|
[汽标代号] Q 171C |
六角头头部带孔螺栓 [较细牙普通螺纹] Hexagon bolts with wire hole on head |
| 13 |
|
[欧标] EN 2887 - 1995 |
航空航天 - 六角头螺栓 全螺纹 耐腐蚀钢 钝化 级别：600MPa (环境温度)/425℃ Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| 14 |
|
[铁道部] TB /T 1479 - 1991 |
轨道车辆车轴轴端螺栓 |
| 15 |
|
[俄标] GOST 7796 (-3) - 1970 |
头部带孔六角头螺栓 3型 Hexagon Reduced Head Bolts Product Grade B, Type 3 |
| 16 |
|
[俄标] GOST 7798 - 1970 |
六角头头部带孔螺栓 Hexagon bolts with wire holes on head |
| 17 |
|
[俄标] GOST 7805 (-3) - 1970 |
六角头头部带孔螺栓 3型 Hexagon Bolts With Wire Holes On Head, product grade A, Type 3 |
| 18 |
|
[美国航空航天] NAS NAM 51474 (DS 51474) - 2011 |
米制六角头全螺纹螺钉 Screw, cap, hex head, fully threaded, metric |
| 19 |
|
[中国兵器工业总公司部标准] WJ 2215 - 1994 |
六角头头部带孔全螺纹螺栓 Hexagon Bolts With Wire Holes On Head - Full Thread |
© 易紧通 服务热线：4006-164580（免长途费）