<< Back

ISO 15980 - 2002 Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

Weight Calculator Message Error Correction 中文版

Unit: 毫米(mm)
Weight Calculator
L
Nominal Diameter
d
Φ2.4 Φ3 Φ3.2
d max
min
dk max
min
k max
d1 max
L1 min
b max
Shear load/N(min)
Tensile load/N(min)
Mandrel break load/N(max)
Head retention test load(N)
2.48 3.08 3.28
2.25 2.85 3.05
5.0 6.3 6.7
4.2 5.4 5.8
1 1.3 1.3
1.5 2.15 2.15
25 25 25
L(max)+3.5 L(max)+3.5 L(max)+4
650 950 1100
700 1100 1200
2000 3200 4000
30 35 35
Recommended grip ranges①
- - -
①,It may be possible to go into individual cases below the minimum values.
②,Nominal lengths L greater than 25 mm shall be specified in 5 mm increments.For availability and grip range refer to manufacturer.
③,Material: A rivet body made of steel (St) and a mandrel made of steel (St) and shall have mechanical properties as specified in clause 5 (See table 3 of the original). Material specification is at the discretion of the manufacturer
Equivalent standard
GB GB /T 12617.2
修改采用 ISO 15980:2002
ISO ISO 15980
DIN DIN EN ISO 15980
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.
Suppliers
Best price if from GlobalFastener.com
  • Cixi Dingsheng Fastener Co., Ltd.
    		•
    Contact: Lisa
    Cellphone： 86-15158363879
    QQ： 点击这里给我发消息469369214
    email： 469369214@qq.com
    Material: Stainless Steel, Iron, Aluminum, etc.; Complete Specifications & Dimensions; Surface Treatment: Customized, Sufficient Stock.
  • Ningbo Chaoxin Rivet Manufacturing Co., Ltd.
    		•
    Contact: Wu Tiezhou
    Cellphone： +86-15906744333
    email： chaoxin@chaoxin-cn.com
    Material: copper, aluminum, iron, stainless steel; specifications: complete; surface treatment: according to customer requirements
  • Shanghai Chengtai Hardware Manufacturing Co., Ltd.
    		•
    Contact: Mr.Zhuge
    Cellphone： +86-18916049888
    QQ： 点击这里给我发消息2880137050 点击这里给我发消息2880137059
    email： chengtai@shchengtai.com
    Material: stainless steel,aluminum,carbon steel; Specification: complete; Surface treatment: according to customer requirement

    I can supply
    Similar Products & Suppliers
    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 10、11

    GB /T 12617.1 - 2006

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 10、11
    Suppliers(4)

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30

    GB /T 12617.2 - 2006

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30
    Suppliers(4)

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 12

    GB /T 12617.3 - 2006

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 12
    Suppliers(4)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 51

    GB /T 12617.4 - 2006

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 51
    Suppliers(4)

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 20,21,22

    GB /T 12617.5 - 2006

    Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 20,21,22
    Suppliers(4)

    120 Deg Flush Head Break Mandrel Blind Rivets

    GB 12617 - 1990

    120 Deg Flush Head Break Mandrel Blind Rivets
    Suppliers(4)

    100 Deg Countersunk Head Pull Through Mandrel Blind Rivets

    IFI 117 - 2003

    100 Deg Countersunk Head Pull Through Mandrel Blind Rivets
    Suppliers(1)

    Metric Flat Countersunk Break Mandrel Blind Rivets

    IFI 505 - 1999

    Metric Flat Countersunk Break Mandrel Blind Rivets
    Suppliers(1)

    Metric 100 Deg Flush Head Or Countersunk Head Pull Through Mandrel Blind Rivets

    IFI 520 - 1999

    Metric 100 Deg Flush Head Or Countersunk Head Pull Through Mandrel Blind Rivets
    Suppliers(1)

    Metric 100 And 120 Deg Flush Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

    IFI 551 - 1999

    Metric 100 And 120 Deg Flush Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
    Suppliers(1)

    100 deg and 120 deg countersunk head style break mandrel blind rivets

    IFI 114 - 2003

    100 deg and 120 deg countersunk head style break mandrel blind rivets

    100 Deg And 120 Deg Flust Head Style Break Mandrel Blind Rivets

    IFI 114 - 1986

    100 Deg And 120 Deg Flust Head Style Break Mandrel Blind Rivets

    Break manderl blind rivets ，countersunk head

    DIN 7337 (B) - 1991

    Break manderl blind rivets ，countersunk head
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

    ISO 15978 - 2002

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

    ISO 15982 - 2002

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

    ISO 15984 - 2002

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

    ISO 16583 - 2002

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt
    Suppliers(2)

    Open end blind rivets with break pull mandrel and countersunk head

    Q 441

    Open end blind rivets with break pull mandrel and countersunk head
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 30

    Q 441B (T19)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 30
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 10、11

    Q 441B

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 10、11
    Suppliers(3)

    100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series)

    ASME/ANSI B 18.30.1M - 2000 (R2005)

    100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head

    UNI 9200 (B) - 1994

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head
    Suppliers(1)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

    NF E 25-721 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

    NF E 25-715 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

    NF E 25-717 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

    NF E 25-719 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

    NF E 25-723 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

    Open end blind rivets with break pull mandrel and countersunk head

    YJT 8038

    Open end blind rivets with break pull mandrel and countersunk head

    Blind bolt, 100° flush head, high strength

    DIN EN 6128 - 2018

    Blind bolt, 100° flush head, high strength

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

    DIN EN ISO 15978 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

    DIN EN ISO 15980 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

    DIN EN ISO 15982 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

    DIN EN ISO 15984 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2
    Suppliers(3)

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

    DIN EN ISO 16583 - 2003

    Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt
    Suppliers(3)

    按电脑端显示

    长按二维码,关注易紧通微信公众号

    Home

    Products & Standards

    Material Search

    Tradeshows