<< Back

DIN EN 6128 - 2018 Blind bolt, 100° flush head, high strength

Message Error Correction 中文版
德标DIN EN 6128 - 2018 DIN EN6128 6128DIN 盲螺栓，100°平头，高强度

Unit:
Size code
05 06 08
A mm (inch) Ref.
B mm (inch) Ref.
c mm (inch) max
D mm (inch) Nominal Size
max
min
N mm (inch) Nominal Size
max
min
Q mm (inch) Nominal Size
max
min
D1 mm (inch) max
w mm (inch) max
min
H mm (inch) max
min
P mm (inch) max
P2 mm (inch) min
S mm (inch) max
J1 mm (inch) Nominal Size
max
min
X mm (inch) Nominal Size
max
min
8.48（0.334） 9.83（0.387） 12.9（0.508）
1.88（0.074） 2.08（0.082） 2.74（0.108）
0.28（0.011） 0.33（0.013） 0.43（0.017）
4.14（0.163） 5.03（0.198） 6.58（0.259）
4.165（0.164） 5.055（0.199） 6.605（0.26）
4.115（0.162） 5.005（0.197） 6.555（0.258）
3.56（0.140） 4.06（0.160） 4.83（0.190）
5.08（0.200） 5.58（0.220） 6.35（0.250）
2.04（0.080） 2.54（0.100） 3.31（0.130）
1.7（0.067） 2.21（0.087） 2.79（0.110）
1.83（0.072） 2.34（0.092） 2.92（0.115）
1.57（0.062） 2.08（0.082） 2.66（0.105）
3.05（0.120） 3.81（0.150） 4.83（0.190）
7.193（0.2832） 8.311（0.3272） 10.973（0.4320）
7.188（0.2830） 8.306（0.3270） 10.968（0.4318）
0.523（0.0206） 0.617（0.0243） 0.787（0.0310）
0.434（0.0171） 0.521（0.0205） 0.686（0.0270）
7.62（0.300） 8.13（0.320） 9.40（0.370）
5.66（0.223） 6.86（0.27） 8.89（0.35）
5.89（0.232） 7.42（0.292） 9.17（0.361）
20.32（0.800） 21.08（0.830） 24.77（0.975）
21.08（0.830） 21.84（0.860） 25.53（1.005）
19.56（0.770） 20.32（0.800） 24.01（0.945）
1.52（0.060） 1.78（0.070） 2.29（0.090）
2.28（0.09） 2.54（0.1） 3.05（0.12）
0.76（0.03） 1.02（0.04） 1.53（0.06）

I want to purchase I can supply
Similar Products & Suppliers
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 10、11

GB /T 12617.1 - 2006

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 10、11
Suppliers(4)

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30

GB /T 12617.2 - 2006

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 30
Suppliers(4)

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 12

GB /T 12617.3 - 2006

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 12
Suppliers(4)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 51

GB /T 12617.4 - 2006

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 51
Suppliers(4)

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 20,21,22

GB /T 12617.5 - 2006

Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - Property Class 20,21,22
Suppliers(4)

120 Deg Flush Head Break Mandrel Blind Rivets

GB 12617 - 1990

120 Deg Flush Head Break Mandrel Blind Rivets
Suppliers(4)

100 Deg Countersunk Head Pull Through Mandrel Blind Rivets

IFI 117 - 2003

100 Deg Countersunk Head Pull Through Mandrel Blind Rivets
Suppliers(1)

Metric Flat Countersunk Break Mandrel Blind Rivets

IFI 505 - 1999

Metric Flat Countersunk Break Mandrel Blind Rivets
Suppliers(1)

Metric 100 Deg Flush Head Or Countersunk Head Pull Through Mandrel Blind Rivets

IFI 520 - 1999

Metric 100 Deg Flush Head Or Countersunk Head Pull Through Mandrel Blind Rivets
Suppliers(1)

Metric 100 And 120 Deg Flush Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

IFI 551 - 1999

Metric 100 And 120 Deg Flush Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
Suppliers(1)

100 deg and 120 deg countersunk head style break mandrel blind rivets

IFI 114 - 2003

100 deg and 120 deg countersunk head style break mandrel blind rivets

100 Deg And 120 Deg Flust Head Style Break Mandrel Blind Rivets

IFI 114 - 1986

100 Deg And 120 Deg Flust Head Style Break Mandrel Blind Rivets

Break manderl blind rivets ，countersunk head

DIN 7337 (B) - 1991

Break manderl blind rivets ，countersunk head
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

ISO 15978 - 2002

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

ISO 15980 - 2002

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

ISO 15982 - 2002

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

ISO 15984 - 2002

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

ISO 16583 - 2002

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt
Suppliers(2)

Open end blind rivets with break pull mandrel and countersunk head

Q 441

Open end blind rivets with break pull mandrel and countersunk head
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 30

Q 441B (T19)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 30
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 10、11

Q 441B

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head-Property Class 10、11
Suppliers(3)

100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series)

ASME/ANSI B 18.30.1M - 2000 (R2005)

100° and 120° Countersunk Head Style Break Mandrel Blind Rivets (Metric series)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head

UNI 9200 (B) - 1994

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head
Suppliers(1)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

NF E 25-721 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

NF E 25-715 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

NF E 25-717 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

NF E 25-719 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

NF E 25-723 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

Open end blind rivets with break pull mandrel and countersunk head

YJT 8038

Open end blind rivets with break pull mandrel and countersunk head

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

DIN EN ISO 15978 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St

DIN EN ISO 15980 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - St/St
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA

DIN EN ISO 15982 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/AIA
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2

DIN EN ISO 15984 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - A2/A2
Suppliers(3)

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt

DIN EN ISO 16583 - 2003

Open End Blind Rivets With Break Pull Mandrel And Countersunk Head - Cu/St or Cu/Br or Cu/SSt
Suppliers(3)

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows