<< Back

ASME B 18.6.3 (T34) - 2013 Combination Slotted Type I Indented Hex Washer Head Screws

Message Error Correction 中文版

Unit:
Thread Size
d
4# 5# 6#
d
PP
M Ref.
Socket No.
n max
min
t max
min
P max
min
s max
min
e min
h max
min
dc max
min
c max
min
0.1120 0.1250 0.1380
40 40 32
0.097 0.105 0.148
1 1 2
0.039 0.043 0.048
0.031 0.035 0.039
0.042 0.049 0.053
0.024 0.028 0.030
0.067 0.076 0.089
0.049 0.058 0.064
0.188 0.188 0.250
0.181 0.181 0.244
0.202 0.202 0.272
0.060 0.070 0.093
0.049 0.058 0.080
0.243 0.260 0.328
0.225 0.240 0.302
0.019 0.025 0.025
0.011 0.015 0.015
①,A slight rounding of all edges and corners of the hex surfaces shall be permissible.
②,Fillet radius, R, at the junction of the sides of the hex and the top of the washer shall not exceed 0.15 times the basic screw diameter.
③,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
④,The recess depths, slot depths, and penetration given are intended to include the depth of the indentation. Due to possible variations in the indentation depths, there could be variations in these dimensions. In these cases, the requirements are to be as agreed upon between the manufacturer and the purchaser.
Alternative history ASME B 18.6.3T34 - 2013 ASME B 18.6.3H10C - 2024

I want to purchase I can supply
Similar Products & Suppliers
Complex Groove SmalI Pan Head Screws

JB /T 14722 (A) - 2024

Complex Groove SmalI Pan Head Screws

Complex Groove Small Pan Head Screw

JB /T 14723 - 2024

Complex Groove Small Pan Head Screw

Complex Groove Cap Head Screw

JB /T 14724 - 2024

Complex Groove Cap Head Screw

Complex Groove Cheese Head Screws with Dog Point for Circuit-breakers

JB /T 14725 - 2024

Complex Groove Cheese Head Screws with Dog Point for Circuit-breakers

Complex Groove Cheese Head Screws with Rounded End

JB /T 14726 - 2024

Complex Groove Cheese Head Screws with Rounded End

Combination Slotted-Cross Recessed Round Head Machine Screws

ASME/ANSI B 18.6.3 (T20) - 2010

Combination Slotted-Cross Recessed Round Head Machine Screws

Plastic Composit Slot Screws with Hole Through Cheese Head

YJT 4016

Plastic Composit Slot Screws with Hole Through Cheese Head

Combination Slotted-Pan Head Screws (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III]

ASME B 18.6.3 (H5D) - 2024

Combination Slotted-Pan Head Screws (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III]

Combination Slotted - Pan Head Screws (ASTM F837, F468)

ASME B 18.6.3 (T20) - 2013

Combination Slotted - Pan Head Screws (ASTM F837, F468)

Combination Slotted Truss Head Screws - Type I [TABLE 2.2.7-3 I]

ASME 18.6.3 (H7C-I) - 2024

Combination Slotted Truss Head Screws - Type I [TABLE 2.2.7-3 I]

Combination Slotted Truss Head Screws - Type III [TABLE 2.2.7-3 III]

ASME B 18.6.3 (H7C-III) - 2024

Combination Slotted Truss Head Screws - Type III [TABLE 2.2.7-3 III]

Combination Slotted Type I Indented Hex Washer Head Screws [TABLE 2.2.10-3]

ASME B 18.6.3 (H10C) - 2024

Combination Slotted Type I Indented Hex Washer Head Screws [TABLE 2.2.10-3]

Combination Slotted Round Head Screws [TABLE 2.2.11-3]

ASME B 18.6.3 (H11C-I/H11C-IA) - 2024

Combination Slotted Round Head Screws [TABLE 2.2.11-3]

Combination Slotted Round Head Screws

ASME B 18.6.3 (T37-I T37-IA) - 2013

Combination Slotted Round Head Screws

Combination Slotted Truss Head Screws，Type I

ASME B 18.6.3 (T26-I) - 2013

Combination Slotted Truss Head Screws，Type I

Combination Slotted Truss Head Screws，Type III

ASME B 18.6.3 (T26-III) - 2013

Combination Slotted Truss Head Screws，Type III

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows