Unit:
|
①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted. ②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable. ③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes. ④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser. |
Slotted Pan Head Tapping Screws
Slotted Pan Head Tapping Screws
Metric Slotted Pan Head Tapping Screws
Slotted pan head tapping screws
Suppliers(1)
Slotted Pan Head Tapping Screws
Slotted pan head tapping screws
Slotted Pan head tapping screws [Table JA3]
Slotted Pan Head Tapping Screws [Table 3]
Slotted pan head self-tapping screws [Table 1]
Slotted Pan head tapping screws [Annex Table 1]
Machine Screw and Tapping Screw Nuts (Inch Seires)
Machine Screw and Tapping Screw Nuts (Inch Seires)
Slotted Pan Head Tapping Screws
Slotted Pan Head Self-Tapping Screws [Table 16]
Slotted Mushroom Head Self-Tapping Screws [Table 18]
ISO metric slotted pan head tapping screws
Slotted Pan Head Tapping Screws
Slotted Pan Head Tapping Screws [PT-K Thread]
Slotted Pan Head Tapping Screws [PT-K Thread]
Slotted Pan Head Tapping Screws
Suppliers(1)
Slotted Pan Head Tapping Screws - Type AB and ABR
Slotted Fillist Head Tapping Screws - Type AB and ABR
Slotted Truss Head Tapping Screws - Type AB and ABR
Slotted Round Head Tapping Screws - Type AB and ABR
Slotted Round Washer Head Tapping Screws - Type AB and ABR
Slotted Pan Head Tapping Screws - Type AB and ABR
Slotted Fillist Head Tapping Screws - Type AB and ABR
Slotted Round Head Tapping Screws - Type AB and ABR
Slotted Round Washer Head Tapping Screws - Type AB and ABR
Metric slotted pan head tapping screws [Table 16]
Slotted Pan Head Tapping Screws - Type B and BP Thread Forming [Table 31]
Slotted Pan Head Tapping Screws - Type C Thread Forming [Table 31]
Slotted Pan Head Tapping Screws - Type AB Thread Forming [Table 31]
Slotted Pan Head Tapping Screws - Type A Thread Forming [Table 31]
Slotted Fillister Head Tapping Screws - Type B and BP Thread Forming [Table 35]
Slotted Fillister Head Tapping Screws - Type C Thread Forming [Table 35]
Slotted Fillister Head Tapping Screws - Type AB Thread Forming [Table 35]
Slotted Fillister Head Tapping Screws - Type A Thread Forming [Table 35]
Slotted Truss Head Tapping Screws - Type B and BP Thread Forming [Table F1]
Slotted Truss Head Tapping Screws - Type C Thread Forming [Table F1]
Slotted Truss Head Tapping Screws - Type AB Thread Forming [Table F1]
Slotted Truss Head Tapping Screws - Type A Thread Forming [Table F1]
Slotted Round Head Tapping Screws - Type B and BP Thread Forming [Table G1]
Slotted Round Head Tapping Screws - Type C Thread Forming [Table G1]
Slotted Round Head Tapping Screws - Type A Thread Forming [Table G1]