ASME B 18.6.3 (H5A+T1A) - 2024 Slotted Pan Head Tapping Screws - Type AB and ABR

Unit:

Thread Size
d

d	Nominal Size
PP
d_k	max
	min
k	max
	min
n	max
	min
t	max
	min
R	max
L₀ ^④	Nominal
Y ^④	Fully Threaded	max
b ^④	Thread Length (Long screws)	min

0.0600	0.0730	0.0860
48	42	32
0.116	0.142	0.167
0.104	0.130	0.155
0.039	0.046	0.053
0.031	0.038	0.045
0.023	0.026	0.031
0.016	0.019	0.023
0.022	0.027	0.031
0.014	0.018	0.022
0.020	0.025	0.035
7/16	9/16	5/8
0.021	0.024	0.031
0.360	0.440	0.520

①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable.
③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser.

GB /T 5282 - 2017

Slotted Pan Head Tapping Screws

GB /T 5282 - 1985

Slotted Pan Head Tapping Screws

IFI 502 - 1982

Metric Slotted Pan Head Tapping Screws

DIN 7971 - 1990

Slotted pan head tapping screws
Suppliers(1)

ISO 1481 - 2011

Slotted Pan Head Tapping Screws

ISO 1481 - 1983

Slotted pan head tapping screws

JIS B 1115 (JA3) - 2015

Slotted Pan head tapping screws [Table JA3]

JIS B 1115 (T3) - 2015

Slotted Pan Head Tapping Screws [Table 3]

JIS B 1115 (T1) - 1996

Slotted pan head self-tapping screws [Table 1]

JIS B 1115 (AT1) - 1996

Slotted Pan head tapping screws [Annex Table 1]

ASME/ANSI B 18.6.3 - 2010

Machine Screw and Tapping Screw Nuts (Inch Seires)

ASME/ANSI B 18.6.3 - 2010

Machine Screw and Tapping Screw Nuts (Inch Seires)

NF E 25-663 - 1994

Slotted Pan Head Tapping Screws

BS 4174 - 1972

Slotted Pan Head Self-Tapping Screws [Table 16]

BS 4174 - 1972

Slotted Mushroom Head Self-Tapping Screws [Table 18]

AS /NZS 4403 - 1996

ISO metric slotted pan head tapping screws

CNS 3982 - 1999

Slotted Pan Head Tapping Screws

YJT 4061 (WN1444C)

Slotted Pan Head Tapping Screws [PT-K Thread]

YJT 4062 (WN1445C)

Slotted Pan Head Tapping Screws [PT-K Thread]

DIN EN ISO 1481 - 2011

Slotted Pan Head Tapping Screws
Suppliers(1)

ASME B 18.6.3 (T17+T40) - 2013

Slotted Pan Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T21+T40) - 2013

Slotted Fillist Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T24+T40) - 2013

Slotted Truss Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T35+T40) - 2013

Slotted Round Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T38+T40) - 2013

Slotted Round Washer Head Tapping Screws - Type AB and ABR

ASME B 18.6.5M (T16) - 2000 (R2010)

Metric slotted pan head tapping screws [Table 16]

ASME B 18.6.4 - 1998

Slotted Pan Head Tapping Screws - Type B and BP Thread Forming [Table 31]

ASME B 18.6.4 - 1998

Slotted Pan Head Tapping Screws - Type C Thread Forming [Table 31]

ASME B 18.6.4 - 1998

Slotted Pan Head Tapping Screws - Type AB Thread Forming [Table 31]

ASME B 18.6.4 - 1998

Slotted Pan Head Tapping Screws - Type A Thread Forming [Table 31]

ASME B 18.6.4 - 1998

Slotted Fillister Head Tapping Screws - Type B and BP Thread Forming [Table 35]

ASME B 18.6.4 - 1998

Slotted Fillister Head Tapping Screws - Type C Thread Forming [Table 35]

ASME B 18.6.4 - 1998

Slotted Fillister Head Tapping Screws - Type AB Thread Forming [Table 35]

ASME B 18.6.4 - 1998

Slotted Fillister Head Tapping Screws - Type A Thread Forming [Table 35]

ASME B 18.6.4 - 1998

Slotted Truss Head Tapping Screws - Type B and BP Thread Forming [Table F1]

ASME B 18.6.4 - 1998

Slotted Truss Head Tapping Screws - Type C Thread Forming [Table F1]

ASME B 18.6.4 - 1998

Slotted Truss Head Tapping Screws - Type AB Thread Forming [Table F1]

ASME B 18.6.4 - 1998

Slotted Truss Head Tapping Screws - Type A Thread Forming [Table F1]

ASME B 18.6.4 - 1998

Slotted Round Head Tapping Screws - Type B and BP Thread Forming [Table G1]

ASME B 18.6.4 - 1998

Slotted Round Head Tapping Screws - Type C Thread Forming [Table G1]

ASME B 18.6.4 - 1998

Slotted Round Head Tapping Screws - Type A Thread Forming [Table G1]