Unit:
|
①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted. ②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable. ③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes. ④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser. |
Hexagon Flange Head Tapping Screws
Hexagon head tapping screws with flange
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon head tapping screws with collar
Metric Hex Flange Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon washer head tapping screws
Hexagon washer head tapping screws
Hexagon Flange Head Tapping Screws
Hexagon flange head tapping screws
Hexagon Head Tapping Screws With Collar [Annex Attached Table 3]
Hexagon Head Self-Tapping Screws With Collar
Hexagon Head Self-Tapping Screws With Flange
Hexagon flange head tapping screws
Hexagon head tapping screws with collar
Machine Screw and Tapping Screw Nuts (Inch Seires)
Hex head flange tapping screws [Table 21]
Metric Hexagon Washer Head Tapping Screws
Metric Hexagon Flange Head Tapping Screws
ISO metric hexagon head tapping screws with washers
ISO metric hexagon flange head tapping screws
Hexagon Flange Head Tapping Screws
Hexagon Washer Head Tapping Screws
Plain and Slotted Hex Washer Head Tapping Screws - Type AB and ABR
Cross Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
Plain and Slotted Hex Washer Head Tapping Screws - Type AB and ABR
Cross Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR