Unit:
毫米(mm) |
①,The contour of the edge at the periphery of flange shall be optional provided the minimum flange thickness is maintained at the minimum flange diameter. The top surface of the flange may be straight or slightly rounded (convex) upward. ②,The comparable ISO standard is ISO 10509. |
Hexagon Flange Head Tapping Screws
Hexagon head tapping screws with flange
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon head tapping screws with collar
Metric Hex Flange Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon Washer Head Tapping Screws
Hexagon washer head tapping screws
Hexagon washer head tapping screws
Hexagon Flange Head Tapping Screws
Hexagon flange head tapping screws
Hexagon Head Tapping Screws With Collar [Annex Attached Table 3]
Hexagon Head Self-Tapping Screws With Collar
Hexagon Head Self-Tapping Screws With Flange
Hexagon flange head tapping screws
Hexagon head tapping screws with collar
Machine Screw and Tapping Screw Nuts (Inch Seires)
Metric Hexagon Washer Head Tapping Screws
Metric Hexagon Flange Head Tapping Screws
ISO metric hexagon head tapping screws with washers
ISO metric hexagon flange head tapping screws
Hexagon Flange Head Tapping Screws
Hexagon Washer Head Tapping Screws
Plain and Slotted Hex Washer Head Tapping Screws - Type AB and ABR
Cross Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
Plain and Slotted Hex Washer Head Tapping Screws - Type AB and ABR
Cross Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR