Unit:
|
①,The length of thread on the nut end of the stud shall not include the run-out threads and shall be equal to twice the nominal diameter of the thread, except in the case of short studs where this would result in a length of plain portion less than 1/ 2 D. In such cases a length of plain portion equal to 1/ 2 D should be allowed for before threading the remainder for the nut end. ②,Metal end (b1): i) The length of the thread on the metal end of the stud shall include the run-out threads and shall be equal to the nominal diameter of the thread or to one and a half times the nominal diameter of the thread, as specified by the purchaser. ii) The length of thread run-out shall be not less than 2 pitches or more than 2-1/2 pitches. iii) The tolerance on the length of the thread shall be plus or minus 1/32 in., or plus or minus half a pitch, whichever is the greater. ③,Ends of studs: a) Metal end: The metal end of the stud shall be finished with a flat chamfer with a 90° included angle to a depth slightly exceeding the depth of thread. b) Nut end: The nut end of the stud (except studs with Unified threads) shall be finished with a radius approximately equal to 11/ 4 times the nominal diameter. Unified threads shall have a shallow dog point machined on the nut end. |
Double End Studs For Pipe Flange Connection - PN designated
Suppliers(1)
Double End Studs - Product Grade B For Pipe Flange Connection
Suppliers(1)
Double End Studs For Pipe Flange Connection
Suppliers(1)
Connections With Waisted Stud - Type S
Double End Studs For Pipe Flange Connection
Suppliers(1)
Connections With Waisted Stud-Studs - Type S
Double End Studs-bm=1d
Suppliers(1)
Double End Studs-bm=1.25d
Suppliers(2)
Double End Studs b1=1.5d
Suppliers(1)
Double End Studs-bm=2d
Suppliers(2)
Double End Studs (Clamping Type)-Product Grade B
Suppliers(1)
Double End Studs(Clamping Type) - Product Grade C
Suppliers(1)
Connections With Waisted Stud - Type L
Connections With Waisted Stud - Type SD
Connections With Waisted Stud - Type A
Connections With Waisted Stud - Type AD
Double End Studs
Suppliers(1)
Metric Double End Studs
Double End Studs
Studs - Metal End ≈ 1 d
Suppliers(1)
Studs - Metal End ≈ 2 d
Studs with a length of engagement equal to about 2.5d
Suppliers(1)
Special Foundation Bolts
Studs For Use With T-Nuts
Stude Threaded End ≈2d
Studs With A Length Of Engagement Equal To About 1d
Suppliers(1)
Studs - Metal end ≈ 1,25 d
Suppliers(2)
Studs - Metal end ≈ 2.5d
Suppliers(1)
Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B)
Suppliers(1)
Studs with Metric Interference Thread MFS - Part 1: Lengths of Engagement ≈ 2 d (Type A)
Suppliers(1)
Double end studs
Studs with a length of engagement equal to about 2.5d
Suppliers(1)
Stude Threaded End ≈2d
Special Foundation Bolts
Studs For Use With T-Nuts ( Long b1 )
Connections With Waisted Stud - Type L
Connections With Waisted Stud - Type K
Connections With Waisted Stud - Type KU
Connections With Waisted Stud - Type Z
Connections With Waisted Stud - Type ZU
Connections With Double End Studs - Type GP
Connections With Double End Studs - Type GQ
Connections With Double End Studs - Type GR
Connections With Double End Studs - Type GS
Connections With Double End Studs - Type HP
Connections With Double End Studs - Type HQ
Connections With Double End Studs - Type HR
Connections With Double End Studs - Type HS
Studs
Suppliers(1)
Double studs
Suppliers(1)
Set of Anchor Bolt with Rolled Threads for Structures - ABR
Set of Anchor Bolt with cut Threads for Structures - ABM
Set of Anchor Bolt with Rolled Threads for Structures
Double-end Dtud Bolt, Carbon steel and hot-clip zinc coated carbon steel
Stainless Steel Double-end Stud Bolt
Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud
Double end studs, bm=1.25d
Double end studs, b1=1.25d
Double end studs,b1=1.25d
Double end studs, b1=1.25d
Double end studs,b1=1.25d
Double end studs,bm=1.25d
Double end studs,b1=1.25d
Double end studs, bm=1.5d
Double end studs, bm=1.5d
Double end studs, bm=1.5d
Double end studs
Double end studs bm=2d
Double end studs
Bolt with double end
Double end studs, b1=1d
Double End Studs ,b1=1.25d
Double end bolts
Double end bolts
Suppliers(1)
Double end studs, b1=1d
PN2500 Ultrahigh Pressure Values and Fittings - Part 14 : Studs Bolts
PN2500 Ultrahigh Pressure Valves and Fittings, Bolts At Boss,
Dynamic load prestressed studs
Double end studs,PN 250MPa
Stud Bolts At Boss,PN 250MPa
Dynamic Load Prestressed Studs
PN16~32MPa Double end studs
Double End Studs, bm=1d
Medium End Studs (b1=1.5d)-ISO Metric Coarse Thread - Product Grade A
Double End Studs, bm=1d
Medium End Studs -ISO Metric Coarse Thread - Product Grade A
Long Metal End Studs - ISO Metric Coarse Thread
Studs - Product A And B b1=1.5d
Studs - Product A And B (b1=1d, 1.25d 或 2d)
Double End Studs With Equal Length
Double end studs-BT