DIN EN 27434 - 1992 Slotted Set Screws With Cone Point

Unit: 毫米(mm)

Thread Size
d

M1.2

M1.6

P	Pitch
d₁	max
n	Nominal Size
	min
	max
t	min
t	max

0.25	0.35	0.4
0.12	0.16	0.2
0.2	0.25	0.25
0.26	0.31	0.31
0.4	0.45	0.45
0.4	0.56	0.64
0.52	0.74	0.84

β±2°

per 1000 units ≈ kg(7.85kg/cm3)

①,Material: a) Steel, Property class: 14H 22H DIN ISO 898-5; b) Stainless steel, Property class: A1-50 ISO 3506； c) Non-ferrous metal, Property class: will be covered in a future international Standard

Equivalent standard

GB	GB 71
ISO	ISO 7434
DIN	DIN EN 27434
EN	EN 27434
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

GB /T 71 - 2018

Slotted Set Screws with Cone Point
Suppliers(1)

GB 71 - 1985

Slotted Set Screws with Cone Point
Suppliers(1)

GB /T 72 - 1988

Slotted set screws with cone point

DIN 553 - 1986

Slotted set screws with cone point

ISO 7434 - 1983

Slotted Set Screws With Cone Point

JIS B 1117 - 2010

Slotted Set Screws With Truncated Cone Point

JIS B 1117 (T2) - 1995

Slotted screws with truncated cone point

Q 280

Slotted set screws with cone point

ASME/ANSI B 18.6.2 - 1998 (R2010)

Slotted set screws with cone point [Table 5] (A307, SAE J429, F468, F593)

EN 27434 - 1992

Slotted Set Screws with Cone Point

NF E 25-161 - 1992 (R2002)

Slotted Set Screws With Cone Point

CNS 4477 - 1981

Slotted Set Screws With Cone Point

QJ 2374 - 1992

Slotted set screws with cone point