<< Back

GB /T 13829.1 (B) - 1992 Grooved Pins-Full-Length Parallel Grooved, With Chamferw


Unit: 毫米(mm)
Weight Calculator
L
Nominal Diameter
d
1.5 2 2.5
d max
min
c2
c
c1
Minimum Double Shear,kN
d1 tol.
1.5 2 2.5
1.475 1.975 2.475
0.12 0.18 0.25
0.6 0.8 1
0.2 0.25 0.3
1.6 2.84 4.4
+0.05,0 +0.05,0 ±0.05
d1
- - -
①,r≈d
Alternative history GB /T 13829.1(B) - 1992 GB /T 13829.2 - 2004
Equivalent standard
GB GB /T 13829.2
ISO ISO 8740
DIN DIN EN ISO 8740
EN EN 28740
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

I want to purchase I can supply
Similar Products & Suppliers
Grooved Pin, Full Length Parallel Grooved With Pilot

GB /T 13829.1 - 2004

Grooved Pin, Full Length Parallel Grooved With Pilot

Grooved Pin, Full Length Parallel Grooved With Chamfer

GB /T 13829.2 - 2004

Grooved Pin, Full Length Parallel Grooved With Chamfer

Grooved pins-One-third-length centre grooved

GB /T 13829.3 - 2004

Grooved pins-One-third-length centre grooved

Grooved Pins - Half-Length Centre Grooved

GB /T 13829.4 - 2004

Grooved Pins - Half-Length Centre Grooved

Grooved pin, full length parallel grooved with pilot

GB /T 13829.1 (A) - 1992

Grooved pin, full length parallel grooved with pilot

Grooved Pins-One-Third-Length Centre Grooved

GB /T 13829.1 (C) - 1992

Grooved Pins-One-Third-Length Centre Grooved

Grooved Pins - Half-Length Centre Grooved

GB /T 13829.1 (D) - 1992

Grooved Pins - Half-Length Centre Grooved

Grooved Pins, Half Length Grooved With Gorge

DIN 1469 - 2012

Grooved Pins, Half Length Grooved With Gorge

Grooved pins, Half length grooved with gorge

DIN 1469 - 2011

Grooved pins, Half length grooved with gorge

Grooved Pins, Half Length Grooved With Gorge

DIN 1469 - 1978

Grooved Pins, Half Length Grooved With Gorge

Grooved pin, full length parallel grooved with pilot

DIN 1470 - 1978

Grooved pin, full length parallel grooved with pilot

Grooved Pins, Full Length Parallel Grooved With Chamfer

DIN 1473 - 1978

Grooved Pins, Full Length Parallel Grooved With Chamfer

Grooved pins - 1/3 Length Centre Grooved

DIN 1475 - 1978

Grooved pins - 1/3 Length Centre Grooved

Grooved Pins-Full-Length Parallel Grooved, With Pilot

ISO 8739 - 1997

Grooved Pins-Full-Length Parallel Grooved, With Pilot

Grooved Pins-Full-Length Parallel Grooved, With Chamfer

ISO 8740 - 1997

Grooved Pins-Full-Length Parallel Grooved, With Chamfer

Grooved Pins-One-Third-Length Centre Grooved

ISO 8742 - 1997

Grooved Pins-One-Third-Length Centre Grooved

Grooved Pins-Half-Length Centre Grooved

ISO 8743 - 1997

Grooved Pins-Half-Length Centre Grooved

Grooved pins metric series with half-length grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Grooved pins metric series with half-length grooved

Metric grooved pins, full-length parallel grooved-metric series

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins, full-length parallel grooved-metric series

Metric grooved pins with one third length groove in the middle

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins with one third length groove in the middle

Metric grooved pins—half-length centre grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins—half-length centre grooved

Full-Length Parallel Grooved, with Chamfer

EN 28740 - 1992

Full-Length Parallel Grooved, with Chamfer

Grooved Pins - Half-Length Centre Grooved

EN 28743 - 1992

Grooved Pins - Half-Length Centre Grooved

Grooved Pins. Half Length Centre Grooved

NF E 25-750 - 1997

Grooved Pins. Half Length Centre Grooved

Grooved Pins — Full-length Parallel Grooved, With Pilot

NF E 25-761 - 1997

Grooved Pins — Full-length Parallel Grooved, With Pilot

Grooved Pins. One-Third-Length Centre Grooved

NF E 25-763 - 1997 (R2002)

Grooved Pins. One-Third-Length Centre Grooved

Grooved Pins. Full Length Paralled Grooved, With Chamfer

NF E 25-772 - 1997 (R2002)

Grooved Pins. Full Length Paralled Grooved, With Chamfer

Grooved Straight Pins - Type C

SAE J 494 (C) - 2004

Grooved Straight Pins - Type C

Grooved Straight Pins - Type E

SAE J 494 (E) - 2004

Grooved Straight Pins - Type E

Grooved Straight Pins - Type F

SAE J 494 (F) - 2004

Grooved Straight Pins - Type F

Grooved Pin, Full Length Parallel Grooved With Pilot

DIN EN ISO 8739 - 1998

Grooved Pin, Full Length Parallel Grooved With Pilot

Grooved Pins. Full-Length Parallel Grooved,With Chamfer

DIN EN ISO 8740 - 1998

Grooved Pins. Full-Length Parallel Grooved,With Chamfer

Grooved Pins - 1/3 Length Centre Grooved

DIN EN ISO 8742 - 1998

Grooved Pins - 1/3 Length Centre Grooved

Grooved Pins -- Half-Length Centre Grooved

DIN EN ISO 8743 - 1998

Grooved Pins -- Half-Length Centre Grooved

Grooved Pins - Half-Length Centre Grooved

EN ISO 8743 - 1997

Grooved Pins - Half-Length Centre Grooved

Grooved pins - Type F

ASME B 18.8.2 - 2020

Grooved pins - Type F

Grooved Pins - Type H

ASME B 18.8.2 - 2020

Grooved Pins - Type H

Grooved Pins - Type G

ASME B 18.8.2 - 2020

Grooved Pins - Type G

Grooved Pins - Type E

ASME B 18.8.2 - 2020

Grooved Pins - Type E

Grooved Pins - Type H

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type H

Grooved Pins - Type E

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type E

Grooved pins - Type F

ASME B 18.8.2 - 2000 (R2010)

Grooved pins - Type F

Grooved Pins - Type G

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type G

HB 858 - 1990

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows