Unit:
毫米(mm) |
| ①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material. |
|
Unit:
毫米(mm) |
| ①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material. |
Grooved Pin, Full Length Parallel Grooved With Pilot
Grooved Pin, Full Length Parallel Grooved With Chamfer
Grooved pins-One-third-length centre grooved
Grooved Pins - Half-Length Centre Grooved
Grooved pin, full length parallel grooved with pilot
Grooved Pins-Full-Length Parallel Grooved, With Chamferw
Grooved Pins-One-Third-Length Centre Grooved
Grooved Pins - Half-Length Centre Grooved
Grooved Pins, Half Length Grooved With Gorge
Grooved pins, Half length grooved with gorge
Grooved Pins, Half Length Grooved With Gorge
Grooved pin, full length parallel grooved with pilot
Grooved Pins, Full Length Parallel Grooved With Chamfer
Grooved pins - 1/3 Length Centre Grooved
Grooved Pins-Full-Length Parallel Grooved, With Pilot
Grooved Pins-Full-Length Parallel Grooved, With Chamfer
Grooved Pins-One-Third-Length Centre Grooved
Grooved Pins-Half-Length Centre Grooved
Grooved pins metric series with half-length grooved
Metric grooved pins, full-length parallel grooved-metric series
Metric grooved pins with one third length groove in the middle
Metric grooved pins—half-length centre grooved
Full-Length Parallel Grooved, with Chamfer
Grooved Pins. Half Length Centre Grooved
Grooved Pins — Full-length Parallel Grooved, With Pilot
Grooved Pins. One-Third-Length Centre Grooved
Grooved Pins. Full Length Paralled Grooved, With Chamfer
Grooved Straight Pins - Type C
Grooved Straight Pins - Type E
Grooved Straight Pins - Type F
Grooved Pin, Full Length Parallel Grooved With Pilot
Grooved Pins. Full-Length Parallel Grooved,With Chamfer
Grooved Pins - 1/3 Length Centre Grooved
Grooved Pins -- Half-Length Centre Grooved
Grooved Pins - Half-Length Centre Grooved
Grooved pins - Type F
Grooved Pins - Type H
Grooved Pins - Type G
Grooved Pins - Type E
Grooved Pins - Type H
Grooved Pins - Type E
Grooved pins - Type F
Grooved Pins - Type G
