<< Back

DIN 1469 - 2012 Grooved Pins, Half Length Grooved with Gorge

Weight Calculator Message Error Correction 中文版

Unit: 毫米(mm)
Weight Calculator
L
Nominal Diameter
d
Φ2 Φ2.5 Φ3
d min
min
a max
min
c ≈
g Type A max
min
m Type A min
max
g Type B max
min
m Type B max
min
g Type C
m Type C Nominal Size（±1/2 IT14）
max
min
r2 Type C
n
Minimum Double Shear,kN
2 2.5 3
1.975 2.475 2.975
1.7 2 2
0.7 1 1
0.25 0.3 0.4
- - 2.8
- - 2.74
- - 0.5
- - 0.64
1.5 1.9 2.3
1.44 1.84 2.24
0.46 0.56 0.67
0.44 0.54 0.64
1 1.2 1.5
0.8 0.8 1
0.925 0.925 1.125
0.675 0.675 0.875
0.4 0.4 0.5
0.8 0.8 1
2.85 4.25 6.15
per 1000 units ≈ kg(7.85kg/cm3)
- - -
①,type A , with slot for retaining rings as in DIN 471;
type B , with slot for retaining washers as in DIN 6799;
type C , with rouded slot.
②,Material: Free-cutting steel (St)
Alternative history DIN 1469 - 1978 DIN 1469 - 2011 DIN 1469 - 2012

I want to purchase I can supply
Similar Products & Suppliers
Grooved Pin, Full Length Parallel Grooved with Pilot

GB /T 13829.1 - 2004

Grooved Pin, Full Length Parallel Grooved with Pilot

Grooved Pin, Full Length Parallel Grooved with Chamfer

GB /T 13829.2 - 2004

Grooved Pin, Full Length Parallel Grooved with Chamfer

Grooved Pins-One-Third-Length Centre Grooved

GB /T 13829.3 - 2004

Grooved Pins-One-Third-Length Centre Grooved

Grooved Pins - Half-Length Centre Grooved

GB /T 13829.4 - 2004

Grooved Pins - Half-Length Centre Grooved

Grooved Pin, Full Length Parallel Grooved with Pilot

GB /T 13829.1 (A) - 1992

Grooved Pin, Full Length Parallel Grooved with Pilot

Grooved Pins-full-length Parallel Grooved, with Chamferw

GB /T 13829.1 (B) - 1992

Grooved Pins-full-length Parallel Grooved, with Chamferw

Grooved Pins-one-third-length Centre Grooved

GB /T 13829.1 (C) - 1992

Grooved Pins-one-third-length Centre Grooved

Grooved Pins - Half-length Centre Grooved

GB /T 13829.1 (D) - 1992

Grooved Pins - Half-length Centre Grooved

Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 2011

Grooved Pins, Half Length Grooved with Gorge

Grooved Pins, Half Length Grooved with Gorge

DIN 1469 - 1978

Grooved Pins, Half Length Grooved with Gorge

Grooved pin, full length parallel grooved with pilot

DIN 1470 - 1978

Grooved pin, full length parallel grooved with pilot

Grooved Pins, Full Length Parallel Grooved with Chamfer

DIN 1473 - 1978

Grooved Pins, Full Length Parallel Grooved with Chamfer

Grooved Pins - 1/3 Length Centre Grooved

DIN 1475 - 1978

Grooved Pins - 1/3 Length Centre Grooved

Grooved Pins-Full-Length Parallel Grooved, with Pilot

ISO 8739 - 1997

Grooved Pins-Full-Length Parallel Grooved, with Pilot

Grooved Pins-Full-Length Parallel Grooved, with Chamfer

ISO 8740 - 1997

Grooved Pins-Full-Length Parallel Grooved, with Chamfer

Grooved Pins-One-Third-Length Centre Grooved

ISO 8742 - 1997

Grooved Pins-One-Third-Length Centre Grooved

Grooved Pins-Half-Length Centre Grooved

ISO 8743 - 1997

Grooved Pins-Half-Length Centre Grooved

Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]

ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005)

Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]

Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]

ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005)

Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]

Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]

ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)

Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]

Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]

ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)

Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]

Full-Length Parallel Grooved, with Chamfer

EN 28740 - 1992

Full-Length Parallel Grooved, with Chamfer

Grooved Pins - Half-Length Centre Grooved

EN 28743 - 1992

Grooved Pins - Half-Length Centre Grooved

Grooved Pins. Half Length Centre Grooved

NF E 25-750 - 1997

Grooved Pins. Half Length Centre Grooved

Grooved Pins - Full-length Parallel Grooved, With Pilot

NF E 25-761 - 1997

Grooved Pins - Full-length Parallel Grooved, With Pilot

Grooved Pins. One-Third-Length Centre Grooved

NF E 25-763 - 1997 (R2002)

Grooved Pins. One-Third-Length Centre Grooved

Grooved Pins. Full Length Paralled Grooved, with Chamfer

NF E 25-772 - 1997 (R2002)

Grooved Pins. Full Length Paralled Grooved, with Chamfer

Grooved Straight Pins - Type C

SAE J 494 (C) - 2004

Grooved Straight Pins - Type C

Grooved Straight Pins - Type E

SAE J 494 (E) - 2004

Grooved Straight Pins - Type E

Grooved Straight Pins - Type F

SAE J 494 (F) - 2004

Grooved Straight Pins - Type F

Grooved Pin, Full Length Parallel Grooved with Pilot

DIN EN ISO 8739 - 1998

Grooved Pin, Full Length Parallel Grooved with Pilot

Grooved Pins. Full-Length Parallel Grooved, with Chamfer

DIN EN ISO 8740 - 1998

Grooved Pins. Full-Length Parallel Grooved, with Chamfer

Grooved Pins - 1/3 Length Centre Grooved

DIN EN ISO 8742 - 1998

Grooved Pins - 1/3 Length Centre Grooved

Grooved Pins - Half-Length Centre Grooved

DIN EN ISO 8743 - 1998

Grooved Pins - Half-Length Centre Grooved

Grooved Pins - Half-Length Centre Grooved

EN ISO 8743 - 1997

Grooved Pins - Half-Length Centre Grooved

Grooved Pins - Type F

ASME B 18.8.2 - 2020

Grooved Pins - Type F

Grooved Pins - Type H

ASME B 18.8.2 - 2020

Grooved Pins - Type H

Grooved Pins - Type G

ASME B 18.8.2 - 2020

Grooved Pins - Type G

Grooved Pins - Type E

ASME B 18.8.2 - 2020

Grooved Pins - Type E

Grooved Pins - Type H

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type H

Grooved Pins - Type E

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type E

Grooved Pins - Type F

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type F

Grooved Pins - Type G

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type G

HB 858 - 1990
按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows