Unit:
毫米(mm) |
| ①,Material:
a)Key height h≤25mm: St50-1K Standard DIN 1652
b)Key height h > 25mm: St60-2K Standard DIN 1652
c)Other materials such as stainless steel, according to the agreement |
|
Unit:
毫米(mm) |
| ①,Material:
a)Key height h≤25mm: St50-1K Standard DIN 1652
b)Key height h > 25mm: St60-2K Standard DIN 1652
c)Other materials such as stainless steel, according to the agreement |
| Best price if from GlobalFastener.com |
| Contact: | Asher |
| Cellphone： | 86-13906641106 |
| email： | Asher@cargin.cn |
| Material: carbon steel, stainless steel; Specifications: complete specifications (can be customized according to customer requirements); Surface Treatment: plain; Sufficient stocks, welcome inquiry! | |
Square And Rectangular Keys
Square And Rectangular Keys
Sguare And Rectangular Thin Keys
Square and Rectangular keys
Square And Rectangular Keys
Sguare And Rectangular Thin Keys
Parallel Keys, Deep Pattern - Type A
Suppliers(1)
Parallel Keys, Deep Pattern - Type B
Parallel Keys, With Two Step Bores For Fixation Screw - Type F
Square Key
Rectangular Key
Square Key
Rectangular Key
Parallel Keys, Deep Pattern - Type B
Parallel Keys, With Two Step Bores For Fixation Screw - Type F
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
Flat Rectangular Key
Slot stones, loose - Form A
Slot stones, loose - Form B
Slot stones, loose - Form C
Flat Rectangular Key
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
Thin Parallel Keys
Parallel Key
Parallel key
Metric Square And Pectang-Ular Keys
Metric Interference Fit Flat Key
Metric square keys
Flat key
Thin parallel keys
Parallel keys - Type I
Parallel keys - Type II
Parallel keys - Type III
Parallel keys - Type IV
Parallel keys - Type V
Parallel keys - Type VI
Keys couplings with prismatic Keys
Flat key
Type A - Keys with both ends round
Type B - Keys with both ends square
Type C - keys with both ends round with hole for one retaining screw
Type D - keys with both ends square with hole for one retaining screw
Type E - Keys with both ends round with holes for two retaining screws
Type F - Keys with both ends square with holes for two retaining screws
Type G - keys with both ends square with chamfer and hole for one retaining screw
Type H - Keys with both ends square with chamfer and holes for two retaining screws
Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve
