Unit:
毫米(mm) |
| ①,If parallel keys of Types E and F From the 12X8 size upwards are required to be supplied minus boles for jacking screws (oS) this must be specially stated when ordering. In this case the designation reads, for example: Parallel key EoS 12x8x56 DIN 6885 |
Square And Rectangular Keys
Square And Rectangular Keys
Sguare And Rectangular Thin Keys
Square and Rectangular keys
Square And Rectangular Keys
Sguare And Rectangular Thin Keys
Parallel Keys, Deep Pattern - Type A
Suppliers(1)
Parallel Keys, Deep Pattern - Type B
Square Key
Rectangular Key
Square Key
Rectangular Key
Parallel Keys, Deep Pattern - Type B
Parallel Keys, With Two Step Bores For Fixation Screw - Type F
Parallel Keys, Deep Pattern - Type A
Suppliers(1)
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
Flat Rectangular Key
Slot stones, loose - Form A
Slot stones, loose - Form B
Slot stones, loose - Form C
Flat Rectangular Key
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
Thin Parallel Keys
Parallel Key
Parallel key
Metric Interference Fit Flat Key
Metric Square And Pectang-Ular Keys
Metric square keys
Flat key
Thin parallel keys
Parallel keys - Type I
Parallel keys - Type II
Parallel keys - Type III
Parallel keys - Type IV
Parallel keys - Type V
Parallel keys - Type VI
Keys couplings with prismatic Keys
Flat key
Type A - Keys with both ends round
Type B - Keys with both ends square
Type C - keys with both ends round with hole for one retaining screw
Type D - keys with both ends square with hole for one retaining screw
Type E - Keys with both ends round with holes for two retaining screws
Type F - Keys with both ends square with holes for two retaining screws
Type G - keys with both ends square with chamfer and hole for one retaining screw
Type H - Keys with both ends square with chamfer and holes for two retaining screws
Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve
