UNI 6605 - 1969 Parallel keys - Type IV

GB /T 1096 - 2003

Square And Rectangular Keys

GB /T 1097 - 2003

Square And Rectangular Keys

GB /T 1567 - 2003

Sguare And Rectangular Thin Keys

GB /T 1096 - 1979

Square and Rectangular keys

GB 1097 - 1979

Square And Rectangular Keys

GB 1567 - 1979

Sguare And Rectangular Thin Keys

DIN 6885-1 (A) - 2021

Parallel Keys, Deep Pattern - Type A
Suppliers(1)

DIN 6885-1 (B) - 2021

Parallel Keys, Deep Pattern - Type B

DIN 6885-1 (F) - 2021

Parallel Keys, With Two Step Bores For Fixation Screw - Type F

DIN 6880 (A) - 2011

Square Key

DIN 6880 (B) - 2011

Rectangular Key

DIN 6880 - 1975

Square Key

DIN 6880 - 1975

Rectangular Key

DIN 6885 (B) - 1968

Parallel Keys, Deep Pattern - Type B

DIN 6885 (F) - 1968

Parallel Keys, With Two Step Bores For Fixation Screw - Type F

DIN 6885 (A) - 1968

Parallel Keys, Deep Pattern - Type A
Suppliers(1)

DIN 6885-1 (C) - 2021

Parallel Keys, with Step Bore Fore Fixation Screw - Type C

DIN 6885-1 (D) - 2021

Parallel Keys,With Step Bore Fore Fixation Screw - Type D

DIN 6885-1 (E) - 2021

Parallel Keys, With Two Step Bores For Fixation Screw - Type E

DIN 6885-1 (G) - 2021

Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G

DIN 6885-1 (H) - 2021

Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H

DIN 6885-1 (J) - 2021

Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J

DIN 6880 (C) - 2011

Flat Rectangular Key

DIN 6323 (A) - 2003

Slot stones, loose - Form A

DIN 6323 (B) - 2003

Slot stones, loose - Form B

DIN 6323 (C) - 2003

Slot stones, loose - Form C

DIN 6880 - 1975

Flat Rectangular Key

DIN 6885 (C) - 1968

Parallel Keys, with Step Bore Fore Fixation Screw - Type C

DIN 6885 (D) - 1968

Parallel Keys,With Step Bore Fore Fixation Screw - Type D

DIN 6885 (E) - 1968

Parallel Keys, With Two Step Bores For Fixation Screw - Type E

DIN 6885 (G) - 1968

Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G

DIN 6885 (H) - 1968

Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H

DIN 6885 (J) - 1968

Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J

ISO 2491 - 1974

Thin Parallel Keys

JIS B 1301 (P/PS) - 1996

Parallel Key

Q 551

Parallel key

ASME/ANSI B 18.25.3M - 1998

Metric Interference Fit Flat Key

ASME/ANSI B 18.25.3M - 1998 (R2008)

Metric Square And Pectang-Ular Keys

ASME/ANSI B 18.25.1M - 1996

Metric square keys

UNI 6604 - 1969

Flat key

UNI 7510 - 1976

Thin parallel keys

UNI 6605 - 1969

Parallel keys - Type I

UNI 6605 - 1969

Parallel keys - Type II

UNI 6605 - 1969

Parallel keys - Type III

UNI 6605 - 1969

Parallel keys - Type V

UNI 6605 - 1969

Parallel keys - Type VI

GOST 23360 - 1978

Keys couplings with prismatic Keys

GOST 8787 - 1968

Flat key

IS 2048 (A) - 1983

Type A - Keys with both ends round

IS 2048 (B) - 1983

Type B - Keys with both ends square

IS 2048 (C) - 1983

Type C - keys with both ends round with hole for one retaining screw

IS 2048 (D) - 1983

Type D - keys with both ends square with hole for one retaining screw

IS 2048 (E) - 1983

Type E - Keys with both ends round with holes for two retaining screws

IS 2048 (F) - 1983

Type F - Keys with both ends square with holes for two retaining screws

IS 2048 (G) - 1983

Type G - keys with both ends square with chamfer and hole for one retaining screw

IS 2048 (H) - 1983

Type H - Keys with both ends square with chamfer and holes for two retaining screws

IS 2048 (J) - 1983

Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve

ASME B 17.1 (USAS B17.1) - 1967 (R2013)