<< Back

DIN 1471 - 1978 Grooved pins, Full Length Taper Grooved


Unit: 毫米(mm)
Weight Calculator
L
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5
d max
min
c
α ± 3°
Minimum Double Shear,kN
1.5 2 2.5
1.475 1.975 2.475
0.2 0.25 0.3
70° 70° 70°
1.60 2.85 4.25
d1
- - -
per 1000 units ≈ kg(7.85kg/cm3)
- - -
①,The notch angle 70 ° ± 3 ° and the notch diameter d1 only apply to notch pins made of 9 SMnPb 28 K (St).
Alternative history DIN 1471 DIN EN ISO 8744 - 1998
Equivalent standard
GB GB /T 13829.5
ISO ISO 8744
DIN DIN EN ISO 8744
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

I want to purchase I can supply
Similar Products & Suppliers
Groovd pins-Full-length taper grooved

GB /T 13829.5 - 2004

Groovd pins-Full-length taper grooved

Grooved Pins - Half-Length Taper Grooved

GB /T 13829.6 - 2004

Grooved Pins - Half-Length Taper Grooved

Grooved pins-Half-length reverse-taper grooved

GB /T 13829.7 - 2004

Grooved pins-Half-length reverse-taper grooved

Grooved pins-taper grooved ,A-style

GB /T 13829.2 (A) - 1992

Grooved pins-taper grooved ,A-style

Grooved pins-half-length taper grooved

GB /T 13829.2 (B) - 1992

Grooved pins-half-length taper grooved

Grooved pins-Half-length reverse-taper grooved

GB /T 13829.2 (C) - 1992

Grooved pins-Half-length reverse-taper grooved

Grooved Pins, Half Length Taper Grooved

DIN 1472 - 1978

Grooved Pins, Half Length Taper Grooved

Grooved pins-Half-length reverse-taper grooved

DIN 1474 - 1978

Grooved pins-Half-length reverse-taper grooved

Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8741 - 1997

Grooved Pins-Half-Length Reverse-Taper Grooved

Groovd Pins-Full-Length Taper Grooved

ISO 8744 - 1997

Groovd Pins-Full-Length Taper Grooved

Grooved Pins-Half-Length Taper Grooved

ISO 8745 - 1997

Grooved Pins-Half-Length Taper Grooved

Grooved pins with half-length taper grooved, metric series

ASME/ANSI B 18.8.100M - 2000 (R2005)

Grooved pins with half-length taper grooved, metric series

Metric series grooved pins with full-length taper grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric series grooved pins with full-length taper grooved

Metric grooved pins — Half-length reverse-taper grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins — Half-length reverse-taper grooved

Grooved Pins - Half-length Reverse-taper Grooved

EN 28741 - 1992

Grooved Pins - Half-length Reverse-taper Grooved

Grooved Pins. Half-Length Reverse-Taper Grooved

NF E 25-762 - 1997

Grooved Pins. Half-Length Reverse-Taper Grooved

Grooved Pins-Full-Length Taper Grooved

NF E 25-764 - 1997 (R2002)

Grooved Pins-Full-Length Taper Grooved

Grooved Pins - Half-Length Taper Grooved

NF E 25-765 - 1997

Grooved Pins - Half-Length Taper Grooved

Grooved Straight Pins - Type A

SAE J 494 (A) - 2004

Grooved Straight Pins - Type A

Grooved Straight Pins - Type B

SAE J 494 (B) - 2004

Grooved Straight Pins - Type B

Grooved Straight Pins - Type D

SAE J 494 (D) - 2004

Grooved Straight Pins - Type D

Groovd Pins - Full-Length Taper Grooved

DIN EN ISO 8744 - 1998

Groovd Pins - Full-Length Taper Grooved

Grooved Pins, Half-Length Taper Grooved

DIN EN ISO 8745 - 1998

Grooved Pins, Half-Length Taper Grooved

Grooved Pins - Half-length Reverse-taper Grooved

DIN EN ISO 8741 - 1998

Grooved Pins - Half-length Reverse-taper Grooved

Grooved Pins - Half-Length Reverse-Taper Grooved

EN ISO 8741 - 1997

Grooved Pins - Half-Length Reverse-Taper Grooved

Grooved Pins - Type A

ASME B 18.8.2 - 2020

Grooved Pins - Type A

Grooved Pins - ype A

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - ype A

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows