<< Back

DIN 1474 - 1978 Grooved pins-Half-length reverse-taper grooved


Unit: 毫米(mm)
Weight Calculator
L
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5
d min
max
c
Minimum Double Shear,kN
α ±3°
1.475 1.975 2.475
1.5 2 2.5
0.2 0.25 0.3
1.60 2.85 4.25
70° 70° 70°
d1
- - -
per 1000 units ≈ kg(7.85kg/cm3)
- - -
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material: a) Free-cutting steel, such as 9SMnPb28K or 45S20K according to DIN 1651 b)Corrosion resistant steel ,such as X12CrMoS17、X12CrNiS18-8(according to DIN 17440) c)Aluminum alloy , such as AlCuMgPb F37(according to DIN1747-1);Copper alloy CuZn38Pb1.5 F41(according to DIN 17671-1)
Alternative history DIN 1474 DIN EN ISO 8741 - 1998
Equivalent standard
GB GB /T 13829.7
ISO ISO 8741
DIN DIN EN ISO 8741
EN EN ISO 8741
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

I want to purchase I can supply
Similar Products & Suppliers
Groovd pins-Full-length taper grooved

GB /T 13829.5 - 2004

Groovd pins-Full-length taper grooved

Grooved Pins - Half-Length Taper Grooved

GB /T 13829.6 - 2004

Grooved Pins - Half-Length Taper Grooved

Grooved pins-Half-length reverse-taper grooved

GB /T 13829.7 - 2004

Grooved pins-Half-length reverse-taper grooved

Grooved pins-taper grooved ,A-style

GB /T 13829.2 (A) - 1992

Grooved pins-taper grooved ,A-style

Grooved pins-half-length taper grooved

GB /T 13829.2 (B) - 1992

Grooved pins-half-length taper grooved

Grooved pins-Half-length reverse-taper grooved

GB /T 13829.2 (C) - 1992

Grooved pins-Half-length reverse-taper grooved

Grooved pins, Full Length Taper Grooved

DIN 1471 - 1978

Grooved pins, Full Length Taper Grooved

Grooved Pins, Half Length Taper Grooved

DIN 1472 - 1978

Grooved Pins, Half Length Taper Grooved

Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8741 - 1997

Grooved Pins-Half-Length Reverse-Taper Grooved

Groovd Pins-Full-Length Taper Grooved

ISO 8744 - 1997

Groovd Pins-Full-Length Taper Grooved

Grooved Pins-Half-Length Taper Grooved

ISO 8745 - 1997

Grooved Pins-Half-Length Taper Grooved

Grooved pins with half-length taper grooved, metric series

ASME/ANSI B 18.8.100M - 2000 (R2005)

Grooved pins with half-length taper grooved, metric series

Metric series grooved pins with full-length taper grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric series grooved pins with full-length taper grooved

Metric grooved pins — Half-length reverse-taper grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins — Half-length reverse-taper grooved

Grooved Pins - Half-length Reverse-taper Grooved

EN 28741 - 1992

Grooved Pins - Half-length Reverse-taper Grooved

Grooved Pins. Half-Length Reverse-Taper Grooved

NF E 25-762 - 1997

Grooved Pins. Half-Length Reverse-Taper Grooved

Grooved Pins-Full-Length Taper Grooved

NF E 25-764 - 1997 (R2002)

Grooved Pins-Full-Length Taper Grooved

Grooved Pins - Half-Length Taper Grooved

NF E 25-765 - 1997

Grooved Pins - Half-Length Taper Grooved

Grooved Straight Pins - Type A

SAE J 494 (A) - 2004

Grooved Straight Pins - Type A

Grooved Straight Pins - Type B

SAE J 494 (B) - 2004

Grooved Straight Pins - Type B

Grooved Straight Pins - Type D

SAE J 494 (D) - 2004

Grooved Straight Pins - Type D

Groovd Pins - Full-Length Taper Grooved

DIN EN ISO 8744 - 1998

Groovd Pins - Full-Length Taper Grooved

Grooved Pins, Half-Length Taper Grooved

DIN EN ISO 8745 - 1998

Grooved Pins, Half-Length Taper Grooved

Grooved Pins - Half-length Reverse-taper Grooved

DIN EN ISO 8741 - 1998

Grooved Pins - Half-length Reverse-taper Grooved

Grooved Pins - Half-Length Reverse-Taper Grooved

EN ISO 8741 - 1997

Grooved Pins - Half-Length Reverse-Taper Grooved

Grooved Pins - Type A

ASME B 18.8.2 - 2020

Grooved Pins - Type A

Grooved Pins - ype A

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - ype A

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows