DIN EN ISO 8741 - 1998 Grooved Pins - Half-length Reverse-Taper Grooved

Unit: 毫米(mm)

Nominal Diameter
d

Φ1.5

Φ2

Φ2.5

d	max=nominal size
d	min
c	≈
Minimum Double Shear,kN
d₁ ^③	tol.

1.5	2	2.5
1.475	1.975	2.475
0.2	0.25	0.3
1.6	2.84	4.4
+0.05	+0.05	±0.05

d₁

①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material
a) Steel (St), hardness 125 HV30 to 245 HV30
b) Austenitic stainless steel A1 according to ISO 3506-1 hardness 210 HV30 to 280 HV30
③,The expanded diameter d1 applies only to pins made from steel as shown in standard. For other materials, for example stainless steel, a reduction amount shall be subtracted from the given values and should be agreed between customer and supplier.

GB /T 13829.5 - 2004

Groovd Pins-Full-Length Taper Grooved

GB /T 13829.6 - 2004

Grooved Pins - Half-Length Taper Grooved

GB /T 13829.7 - 2004

Grooved Pins-Half-Length Reverse-Taper Grooved

GB /T 13829.2 (A) - 1992

Grooved Pins-taper Grooved, A-style

GB /T 13829.2 (B) - 1992

Grooved Pins-half-length Taper Grooved

GB /T 13829.2 (C) - 1992

Grooved Pins-half-length Reverse-taper Grooved

DIN 1471 - 1978

Grooved Pins, Full Length Taper Grooved

DIN 1472 - 1978

Grooved Pins, Half Length Taper Grooved

DIN 1474 - 1978

Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8741 - 1997

Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8744 - 1997

Groovd Pins-Full-Length Taper Grooved

ISO 8745 - 1997

Grooved Pins-Half-Length Taper Grooved

ASME/ANSI B 18.8.100M (B18.8.9M T7) - 2000 (R2005)

Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7]

ASME/ANSI B 18.8.100M (B18.8.9M T6) - 2000 (R2005)

Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6]

ASME/ANSI B 18.8.100M (B18.8.9M A) - 2000 (R2005)

Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41

EN 28741 - 1992

Grooved Pins - Half-length Reverse-taper Grooved

NF E 25-762 - 1997

Grooved Pins. Half-Length Reverse-Taper Grooved

NF E 25-764 - 1997 (R2002)

Grooved Pins-Full-Length Taper Grooved

NF E 25-765 - 1997

Grooved Pins - Half-Length Taper Grooved

SAE J 494 (A) - 2004

Grooved Straight Pins - Type A

SAE J 494 (B) - 2004

Grooved Straight Pins - Type B

SAE J 494 (D) - 2004

Grooved Straight Pins - Type D

DIN EN ISO 8744 - 1998

Groovd Pins - Full-Length Taper Grooved

DIN EN ISO 8745 - 1998

Grooved Pins, Half-Length Taper Grooved

EN ISO 8741 - 1997

Grooved Pins - Half-length Reverse-taper Grooved

ASME B 18.8.2 - 2020

Grooved Pins - Type A

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - Type A

GB	GB /T 13829.7
ISO	ISO 8741
DIN	DIN EN ISO 8741
EN	EN ISO 8741
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.