<< Back

GB /T 1415 - 2008 Metric threads where pressure-tight joints are made on the threads

Message Error Correction 中文版

I want to purchase I can supply
Similar Products & Suppliers
Locking threads with 30 degree wedge ramp

GB /T 37462 - 2019

Locking threads with 30 degree wedge ramp

Miniature screw threads : Profiles , general plan and basic dimensions

GB /T 15054.1 - 2018

Miniature screw threads : Profiles , general plan and basic dimensions

General purpose metric screw threads - Tolerances

GB /T 197 - 2018

General purpose metric screw threads - Tolerances

The blank diameters for rolling general purpose metric screw threads

GB /T 18685 - 2017

The blank diameters for rolling general purpose metric screw threads

GB /T 12716 - 2011
Dryseal pipe threads with the thread angle of 60 degrees

GB /T 27944 - 2011

Dryseal pipe threads with the thread angle of 60 degrees

Internal thread for wire thread inserts

GB /T 24425.5 - 2009

Internal thread for wire thread inserts

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

GB /T 13576.1 - 2008

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

General purpose metric screw threads - Limits of sizes

GB /T 15756 - 2008

General purpose metric screw threads - Limits of sizes

Unified screw threads - General plan

GB /T 20670 - 2006

Unified screw threads - General plan

Trapezoidal screw threads - Part 1: Profiles

GB /T 5796.1 - 2005

Trapezoidal screw threads - Part 1: Profiles

General purpose metric screw threads - The plan for pipe systems

GB /T 1414 - 2003

General purpose metric screw threads - The plan for pipe systems

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

GB /T 192 - 2003

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

General purpose metric screw threads - Basic dimenslons

GB /T 196 - 2003

General purpose metric screw threads - Basic dimenslons

General purpose metric screw threads - Limit deviations

GB /T 2516 - 2003

General purpose metric screw threads - Limit deviations

General purpose metric screw threads - Preferable plan

GB /T 9144 - 2003

General purpose metric screw threads - Preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

GB /T 9145 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

GB /T 9146 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

Tapping screws thread

GB /T 5280 - 2002

Tapping screws thread

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

GB /T 7307 - 2001

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

GB /T 7306.1 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

GB /T 7306.2 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

The interference-fit threads

GB /T 1181 - 1998

The interference-fit threads

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

GB /T 3 - 1997

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

The threads for transition fit

GB 1167 - 1996

The threads for transition fit

Pipe threads where pressure-tight joints are made on the threads

GB 7306 - 1987

Pipe threads where pressure-tight joints are made on the threads

Screws thread shanks for thread forming screw-Metric coarse thread series

GB /T 6559 - 1986

Screws thread shanks for thread forming screw-Metric coarse thread series

Specification for wood screws

GB /T 922 - 1986

Specification for wood screws

Metric triangle lock with thread end

IFI 502 - 1982

Metric triangle lock with thread end

Metric Self-tapping Thread End

IFI 502 - 1982

Metric Self-tapping Thread End

Whitworth pipe threads for pipe unions

DIN 3858 - 2005

Whitworth pipe threads for pipe unions

Plastic threads

DIN 7505 - 1986

Plastic threads

Threads and thread ends for tapping screws

DIN 7970 - 1984

Threads and thread ends for tapping screws

ISO - Metric Trapezoidal Screw Threads

DIN 103 - 1 - 1977

ISO - Metric Trapezoidal Screw Threads

Thread and thread ends for wood screws

DIN 7998 - 1975

Thread and thread ends for wood screws

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

DIN 2510-2 - 1971

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO 3353-1 - 2020

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO metric trapezoidal screw threads - Basic and design profiles

ISO 2901 - 2016

ISO metric trapezoidal screw threads - Basic and design profiles

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

ISO 965-1 - 2013

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO 888 - 2012

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO inch screw threads─Basic dimensions

ISO 725 - 2009

ISO inch screw threads─Basic dimensions

Pipe threads where pressure-tight joints are not made on the threads

ISO 228-1 - 2000

Pipe threads where pressure-tight joints are not made on the threads

Tapping Screws Thread

ISO 1478 - 1999

Tapping Screws Thread

ISO general purpose metric screw threads - General plan

ISO 261 - 1998

ISO general purpose metric screw threads - General plan

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

ISO 262 - 1998

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

Limits of sizes for general purpose external and internal screw threads

ISO 965-2 - 1998

Limits of sizes for general purpose external and internal screw threads

Deviations for constructional screw threads

ISO 965-3 - 1998

Deviations for constructional screw threads

ISO general-purpose metric screw threads─Basic dimensions

ISO 724 - 1993

ISO general-purpose metric screw threads─Basic dimensions

Tapping Screw Threads and Ends

JIS B 1125 (1) - 2015

Tapping Screw Threads and Ends

Limit gauges for metric screw threads

JIS B 0251 - 2008

Limit gauges for metric screw threads

Tapping screw threads and ends

JIS B 1125 (1) - 2003

Tapping screw threads and ends

Limits of sizes and tolerances for metric coarse screw threads

JIS B 0209 - 1997

Limits of sizes and tolerances for metric coarse screw threads

Tapping Screw Threads and Ends

JIS B 1125 (1) - 1995

Tapping Screw Threads and Ends

Locking Thread with 30° wedge ramp

JB /T 10971 - 2010

Locking Thread with 30° wedge ramp

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

ASME/ANSI B 18.6.3 (T40) - 2013

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T41) - 2013

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T42) - 2013

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

ASME/ANSI B 18.6.3 (T46) - 2013

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

ASME/ANSI B 18.6.3 (T47) - 2013

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

Lag screw threads

ASME/ANSI B 18.2.1 - 2010

Lag screw threads

AB self-tapping teeth

ASME/ANSI B 18.6.3 - 2010

AB self-tapping teeth

self-tapping teeth-B

ASME/ANSI B 18.6.3 - 2010

self-tapping teeth-B

Self-tapping teeth-BF

ASME/ANSI B 18.6.3 - 2010

Self-tapping teeth-BF

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010
Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

ASME/ANSI B 18.31.3 - 2009

Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

Wood thread

ASME/ANSI B 18.6.1 - 1997

Wood thread

Wood thread

ASME/ANSI B 18.6.1 - 1981

Wood thread

Thread and body dimeters for wood screws

ASME/ANSI B 18.6.1 - 1981 (R2016)

Thread and body dimeters for wood screws

EN 60423 - 2007
Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

EN 10226-1 - 2004

Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

UNI 9702 - 1990
US triangle lock thread-S type

YJT 1025 - 2012

US triangle lock thread-S type

Metric triangle lock thread-S type

YJT 1026 - 2012

Metric triangle lock thread-S type

Metric triangle lock thread-C type

YJT 1027 - 2012

Metric triangle lock thread-C type

Metric triangle lock thread-B type

YJT 1028 - 2012

Metric triangle lock thread-B type

Metric triangle lock thread-P type

YJT 1029 - 2012

Metric triangle lock thread-P type

Thread and point details for Type Y thread cutting screws [TABLE 6]

BS 4174 - 1972

Thread and point details for Type Y thread cutting screws [TABLE 6]

Thread and point details for Type A threads [TABLE 23]

BS 4174 - 1972

Thread and point details for Type A threads [TABLE 23]

Screw Threads - UNJ Profile, Inch

SAE AS 8879 - 2001

Screw Threads - UNJ Profile, Inch

Tapping thread for nylon lock

QC /T 713 - 2004

Tapping thread for nylon lock

Screw Threads for Thread Forming Tapping Screws - Dimensions

IS 5957 - 2003

Screw Threads for Thread Forming Tapping Screws - Dimensions

ISO general purpose metric screw threads - General plan

IS 4218 (-2) - 2001

ISO general purpose metric screw threads - General plan

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

ASME B 18.6.3 (T4.3.1-1) - 2024

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

ASME B 18.6.3 (T4.3.2.1) - 2024

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.1-1) - 2024

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.2-1) - 2024

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.4-1) - 2024

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Type AB, Thread Forming Tapping Screws [Table 5]

ASME B 18.6.4 (AB) - 1998 (R2005)

Type AB, Thread Forming Tapping Screws [Table 5]

Type B and BP, Thread Forming Tapping Screws [Table 6]

ASME B 18.6.4 (B/BP) - 1998 (R2005)

Type B and BP, Thread Forming Tapping Screws [Table 6]

Type A, Thread Forming Tapping Screws [Table E1]

ASME B 18.6.4 (A) - 1998 (R2005)

Type A, Thread Forming Tapping Screws [Table E1]

Typ C, Thread Forming Tapping Screws [Table V1]

ASME B 18.6.4 (C) - 1998 (R2005)

Typ C, Thread Forming Tapping Screws [Table V1]

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows