<< Back

GB /T 18685 - 2017 The blank diameters for rolling general purpose metric screw threads

Message Error Correction 中文版
螺纹
M 1 M 1 M 1.1 M 1.1 M 1.2 M 1.2 M 1.4 M 1.4 M 1.6 M 1.6 M 1.8 M 1.8 M 2 M 2 M 2.2
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
0.25 0.2 0.25 0.2 0.25 0.2 0.3 0.2 0.35 0.2 0.35 0.2 0.4 0.25 0.45
0.833 0.864 0.933 0.963 1.032 1.063 1.199 1.262 1.366 1.462 1.565 1.661 1.733 1.829 1.901
0.817 0.849 0.916 0.948 1.015 1.048 1.182 1.247 1.348 1.445 1.547 1.645 1.714 1.810 1.881
0.830 0.864 0.930 0.963 1.029 1.063 1.196 1.262 1.363 1.462 1.562 1.661 1.730 1.826 1.898
0.798 0.831 0.897 0.931 0.996 1.030 1.162 1.229 1.325 1.427 1.524 1.627 1.689 1.790 1.855
0.813 0.847 0.912 0.946 1.011 1.046 1.178 1.245 1.345 1.445 1.543 1.645 1.711 1.808 1.878
0.780 0.814 0.879 0.914 0.978 1.013 1.144 1.212 1.307 1.410 1.505 1.610 1.670 1.772 1.835
- - - - - - - - 1.330 - 1.528 - 1.696 - 1.863
- - - - - - - - 1.292 - 1.490 - 1.655 - 1.820
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
螺纹
M 2.2 M 2.5 M 2.5 M 3 M 3 M 3.5 M 3.5 M 4 M 4 M 4.5 M 4.5 M 5 M 5 M 6 M 6
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
0.25 0.45 0.35 0.5 0.35 0.6 0.35 0.7 0.5 0.75 0.5 0.8 0.5 1 0.75
2.029 2.199 2.263 2.665 2.762 3.098 3.260 3.539 3.666 4.006 4.165 4.472 4.664 5.344 5.501
2.010 2.179 2.245 2.644 2.742 3.078 3.241 3.513 3.642 3.981 4.141 4.445 4.640 5.312 5.471
2.026 2.196 2.260 2.662 2.759 3.092 3.257 3.528 3.658 3.996 4.157 4.461 4.657 5.328 5.490
1.990 2.154 2.222 2.617 2.717 3.046 3.216 3.479 3.615 3.948 4.114 4.410 4.613 5.271 5.434
2.008 2.177 2.241 2.642 2.740 3.071 3.238 3.507 3.638 3.974 4.137 4.437 4.637 5.303 5.468
1.972 2.134 2.203 2.597 2.698 3.025 3.197 3.457 3.595 3.926 4.094 4.387 4.593 5.245 5.412
- 2.162 2.226 2.626 2.725 3.056 3.223 3.491 3.622 3.958 4.121 4.423 4.621 5.289 5.452
- 2.119 2.188 2.581 2.683 3.010 3.182 3.441 3.579 3.910 4.078 4.373 4.577 5.231 5.396
- - - 2.612 - 3.040 - 3.473 3.608 3.940 4.107 4.401 4.607 5.269 5.434
- - - 2.567 - 2.993 - 3.423 3.565 3.892 4.064 4.351 4.563 5.211 5.378
螺纹
M 7 M 7 M 8 M 8 M 8 M 10 M 10 M 10 M 10 M 12 M 12 M 12 M 12 M 14 M 14
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
1 0.75 1.25 1 0.75 1.5 1.25 1 0.75 1.75 1.5 1.25 1 2 1.5
6.341 6.499 7.184 7.338 7.498 9.016 9.179 9.335 9.497 10.846 11.011 11.170 11.333 12.689 13.008
6.309 6.469 7.152 7.307 7.468 8.986 9.147 9.304 9.466 10.818 10.976 11.134 11.298 12.659 12.973
6.325 6.488 7.166 7.323 7.487 8.994 9.161 9.320 9.485 10.822 10.990 11.150 11.318 12.663 12.986
6.268 6.432 7.109 7.266 7.431 8.939 9.104 9.263 9.429 10.764 10.926 11.087 11.255 12.599 12.923
6.300 6.466 7.138 7.297 7.465 8.962 9.133 9.294 9.463 10.789 10.958 11.122 11.292 12.625 12.954
6.242 6.410 7.081 7.240 7.409 8.907 9.076 9.237 9.407 10.730 10.894 11.059 11.229 12.561 12.891
6.286 6.450 7.124 7.283 7.449 8.949 9.120 9.280 9.447 10.775 10.945 11.108 11.278 12.611 12.941
6.228 6.394 7.067 7.226 7.393 8.894 9.062 9.223 9.391 10.716 10.881 11.045 11.215 12.547 12.878
6.266 6.432 7.103 7.263 7.431 8.927 9.099 9.260 9.429 10.752 10.923 11.087 11.258 12.592 12.920
6.208 6.376 7.046 7.206 7.375 8.872 9.041 9.203 9.373 10.693 10.859 11.024 11.195 12.528 12.856
螺纹
M 14 M 16 M 16 M 16 M 18 M 18 M 18 M 18 M 20 M 20 M 20 M 20 M 22 M 22 M 22
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
1 2 1.5 1 2.5 2 1.5 1 2.5 2 1.5 1 2.5 2 1.5
13.332 14.685 15.006 15.331 16.364 16.681 17.004 17.330 18.359 18.679 19.003 19.330 20.356 20.677 20.997
13.297 14.655 14.970 15.296 16.339 16.651 16.969 17.295 18.335 18.649 18.967 19.294 20.332 20.647 20.966
13.317 14.658 14.984 15.316 16.324 16.655 16.982 17.315 18.320 18.652 18.981 19.315 20.316 20.650 20.974
13.254 14.595 14.920 15.253 16.276 16.591 16.919 17.252 18.271 18.589 18.917 19.251 20.268 20.587 20.916
13.291 14.620 14.952 15.290 16.282 16.617 16.950 17.289 18.278 18.614 18.949 19.289 20.274 20.612 20.942
13.228 14.557 14.889 15.227 16.234 16.553 16.887 17.226 18.229 18.551 18.885 19.225 20.226 20.549 20.884
13.277 14.606 14.939 15.276 16.266 16.603 16.937 17.275 18.262 18.600 18.936 19.275 20.258 20.598 20.929
13.214 14.543 14.876 15.213 16.218 16.539 16.874 17.212 18.213 18.537 18.872 19.211 20.210 20.535 20.871
13.257 14.587 14.917 15.256 16.244 16.584 16.915 17.255 18.240 18.581 18.914 19.255 20.236 20.579 20.907
13.194 14.524 14.854 15.193 16.196 16.520 16.852 17.192 18.192 18.518 18.850 19.191 20.188 20.516 20.849
螺纹
M 22 M 24 M 24 M 24 M 24 M 27 M 27 M 27 M 27 M 30 M 30 M 30 M 30 M 33 M 33
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
1 3 2 1.5 1 3 2 1.5 1 3.5 2 1.5 1 3.5 2
21.329 22.030 22.675 22.996 23.329 25.025 25.673 25.995 26.328 27.711 28.671 28.994 29.328 30.707 31.670
21.294 22.003 22.639 22.960 23.288 24.998 25.637 25.959 26.288 27.681 28.635 28.958 29.287 30.677 31.634
21.314 21.995 22.649 22.973 23.314 24.990 25.647 25.971 26.313 27.656 28.645 28.971 29.313 30.651 31.644
21.251 21.928 22.575 22.905 23.243 24.924 25.573 25.904 26.243 27.601 28.571 28.903 29.242 30.597 31.570
21.288 21.947 22.611 22.941 23.288 24.942 25.609 25.939 26.287 27.603 28.607 28.939 29.287 30.598 31.606
21.225 21.881 22.537 22.873 23.217 24.876 25.535 25.872 26.217 27.548 28.533 28.871 29.216 30.544 31.532
21.274 21.932 22.597 22.928 23.274 24.927 25.595 25.926 26.273 27.586 28.593 28.926 29.273 30.581 31.592
21.211 21.866 22.523 22.860 23.203 24.861 25.521 25.859 26.203 27.531 28.519 28.858 29.202 30.527 31.518
21.254 21.910 22.578 22.906 23.254 24.905 25.576 25.904 26.253 27.566 28.574 28.904 29.253 30.561 31.573
21.191 21.844 22.504 22.838 23.183 24.839 25.502 25.837 26.183 27.511 28.500 28.836 29.182 30.507 31.499
螺纹
M 33 M 36 M 36 M 36 M 36 M 39 M 39 M 39 M 39 M 42 M 42 M 42 M 42 M 45 M 45
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
1.5 4 3 2 1.5 4 3 2 1.5 4 3 2 1.5 4 3
31.994 33.386 34.016 34.669 34.993 36.382 37.014 37.668 37.993 39.379 40.012 40.667 40.992 42.376 43.010
31.957 33.358 33.989 34.633 34.957 36.354 36.987 37.632 37.956 39.351 39.985 40.631 40.956 42.348 42.983
31.970 33.326 33.980 34.642 34.969 36.322 36.978 37.642 37.969 39.319 39.976 40.641 40.968 42.316 42.975
31.902 33.274 33.914 34.569 34.902 36.270 36.912 37.568 37.901 39.267 39.910 40.567 40.901 42.264 42.908
31.938 33.266 33.932 34.605 34.937 36.262 36.930 37.604 37.937 39.259 39.928 40.603 40.936 42.256 42.927
31.870 33.214 33.866 34.531 34.870 36.210 36.864 37.530 37.869 39.207 39.862 40.529 40.869 42.204 42.860
31.925 33.251 33.917 34.591 34.924 36.247 36.915 37.590 37.924 39.244 39.913 40.589 40.923 42.241 42.912
31.857 33.199 33.851 34.517 34.857 36.195 36.849 37.516 37.856 39.192 39.847 40.515 40.856 42.189 42.845
31.903 33.231 33.895 34.572 34.902 36.227 36.893 37.571 37.902 39.224 39.891 40.570 40.901 42.221 42.890
31.835 33.179 33.829 34.498 34.835 36.175 36.827 37.497 37.834 39.172 39.825 40.496 40.834 42.169 42.823
螺纹
M 45 M 45 M 48 M 48 M 48 M 48 M 52 M 52 M 52 M 52
螺距
材料 4h 最大值
最小值
6h 最大值
最小值
6g 最大值
最小值
6f 最大值
最小值
6e 最大值
最小值
2 1.5 4 3 2 1.5 4 3 2 1.5
43.666 43.992 45.373' 46.001 46.666 46.991 49.370' 49.999 50.665 50.991
43.630 43.955 45.335 45.975 46.624 46.950 49.332 49.973 50.623 50.950
43.640 43.968 45.313 45.967 46.640 46.968 49.310 49.965 50.639 50.967
43.566 43.900 45.249 45.895 46.556 46.890 49.247 49.893 50.555 50.890
43.602 43.936 45.253 45.919 46.602 46.936 49.250 49.917 50.601 50.935
43.528 43.868 45.189 45.847 46.518 46.858 49.187 49.845 50.517 50.858
43.588 43.923 45.238 45.904 46.588 46.923 49.235 49.902 50.587 50.922
43.514 43.855 45.174 45.832 46.504 46.845 49.172 49.830 50.503 50.845
43.569 43.901 45.218 45.882 46.569 46.901 49.215 49.880 50.568 50.900
43.495 43.833 45.154 45.810 46.485 46.823 49.152 49.808 50.484 50.823
来源：GB 18685-2017

I want to purchase I can supply
Similar Products & Suppliers
Locking threads with 30 degree wedge ramp

GB /T 37462 - 2019

Locking threads with 30 degree wedge ramp

Miniature screw threads : Profiles , general plan and basic dimensions

GB /T 15054.1 - 2018

Miniature screw threads : Profiles , general plan and basic dimensions

General purpose metric screw threads - Tolerances

GB /T 197 - 2018

General purpose metric screw threads - Tolerances

GB /T 12716 - 2011
Dryseal pipe threads with the thread angle of 60 degrees

GB /T 27944 - 2011

Dryseal pipe threads with the thread angle of 60 degrees

Internal thread for wire thread inserts

GB /T 24425.5 - 2009

Internal thread for wire thread inserts

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

GB /T 13576.1 - 2008

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

Metric threads where pressure-tight joints are made on the threads

GB /T 1415 - 2008

Metric threads where pressure-tight joints are made on the threads

General purpose metric screw threads - Limits of sizes

GB /T 15756 - 2008

General purpose metric screw threads - Limits of sizes

Unified screw threads - General plan

GB /T 20670 - 2006

Unified screw threads - General plan

Trapezoidal screw threads - Part 1: Profiles

GB /T 5796.1 - 2005

Trapezoidal screw threads - Part 1: Profiles

General purpose metric screw threads - The plan for pipe systems

GB /T 1414 - 2003

General purpose metric screw threads - The plan for pipe systems

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

GB /T 192 - 2003

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

General purpose metric screw threads - Basic dimenslons

GB /T 196 - 2003

General purpose metric screw threads - Basic dimenslons

General purpose metric screw threads - Limit deviations

GB /T 2516 - 2003

General purpose metric screw threads - Limit deviations

General purpose metric screw threads - Preferable plan

GB /T 9144 - 2003

General purpose metric screw threads - Preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

GB /T 9145 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

GB /T 9146 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

Tapping screws thread

GB /T 5280 - 2002

Tapping screws thread

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

GB /T 7307 - 2001

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

GB /T 7306.1 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

GB /T 7306.2 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

The interference-fit threads

GB /T 1181 - 1998

The interference-fit threads

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

GB /T 3 - 1997

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

The threads for transition fit

GB 1167 - 1996

The threads for transition fit

Pipe threads where pressure-tight joints are made on the threads

GB 7306 - 1987

Pipe threads where pressure-tight joints are made on the threads

Screws thread shanks for thread forming screw-Metric coarse thread series

GB /T 6559 - 1986

Screws thread shanks for thread forming screw-Metric coarse thread series

Specification for wood screws

GB /T 922 - 1986

Specification for wood screws

Metric triangle lock with thread end

IFI 502 - 1982

Metric triangle lock with thread end

Metric Self-tapping Thread End

IFI 502 - 1982

Metric Self-tapping Thread End

Whitworth pipe threads for pipe unions

DIN 3858 - 2005

Whitworth pipe threads for pipe unions

Plastic threads

DIN 7505 - 1986

Plastic threads

Threads and thread ends for tapping screws

DIN 7970 - 1984

Threads and thread ends for tapping screws

ISO - Metric Trapezoidal Screw Threads

DIN 103 - 1 - 1977

ISO - Metric Trapezoidal Screw Threads

Thread and thread ends for wood screws

DIN 7998 - 1975

Thread and thread ends for wood screws

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

DIN 2510-2 - 1971

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO 3353-1 - 2020

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO metric trapezoidal screw threads - Basic and design profiles

ISO 2901 - 2016

ISO metric trapezoidal screw threads - Basic and design profiles

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

ISO 965-1 - 2013

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO 888 - 2012

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO inch screw threads─Basic dimensions

ISO 725 - 2009

ISO inch screw threads─Basic dimensions

Pipe threads where pressure-tight joints are not made on the threads

ISO 228-1 - 2000

Pipe threads where pressure-tight joints are not made on the threads

Tapping Screws Thread

ISO 1478 - 1999

Tapping Screws Thread

ISO general purpose metric screw threads - General plan

ISO 261 - 1998

ISO general purpose metric screw threads - General plan

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

ISO 262 - 1998

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

Limits of sizes for general purpose external and internal screw threads

ISO 965-2 - 1998

Limits of sizes for general purpose external and internal screw threads

Deviations for constructional screw threads

ISO 965-3 - 1998

Deviations for constructional screw threads

ISO general-purpose metric screw threads─Basic dimensions

ISO 724 - 1993

ISO general-purpose metric screw threads─Basic dimensions

Tapping Screw Threads and Ends

JIS B 1125 (1) - 2015

Tapping Screw Threads and Ends

Limit gauges for metric screw threads

JIS B 0251 - 2008

Limit gauges for metric screw threads

Tapping screw threads and ends

JIS B 1125 (1) - 2003

Tapping screw threads and ends

Limits of sizes and tolerances for metric coarse screw threads

JIS B 0209 - 1997

Limits of sizes and tolerances for metric coarse screw threads

Tapping Screw Threads and Ends

JIS B 1125 (1) - 1995

Tapping Screw Threads and Ends

Locking Thread with 30° wedge ramp

JB /T 10971 - 2010

Locking Thread with 30° wedge ramp

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

ASME/ANSI B 18.6.3 (T40) - 2013

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T41) - 2013

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T42) - 2013

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

ASME/ANSI B 18.6.3 (T46) - 2013

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

ASME/ANSI B 18.6.3 (T47) - 2013

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

Lag screw threads

ASME/ANSI B 18.2.1 - 2010

Lag screw threads

AB self-tapping teeth

ASME/ANSI B 18.6.3 - 2010

AB self-tapping teeth

self-tapping teeth-B

ASME/ANSI B 18.6.3 - 2010

self-tapping teeth-B

Self-tapping teeth-BF

ASME/ANSI B 18.6.3 - 2010

Self-tapping teeth-BF

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010
Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

ASME/ANSI B 18.31.3 - 2009

Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

Wood thread

ASME/ANSI B 18.6.1 - 1997

Wood thread

Wood thread

ASME/ANSI B 18.6.1 - 1981

Wood thread

Thread and body dimeters for wood screws

ASME/ANSI B 18.6.1 - 1981 (R2016)

Thread and body dimeters for wood screws

EN 60423 - 2007
Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

EN 10226-1 - 2004

Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

UNI 9702 - 1990
US triangle lock thread-S type

YJT 1025 - 2012

US triangle lock thread-S type

Metric triangle lock thread-S type

YJT 1026 - 2012

Metric triangle lock thread-S type

Metric triangle lock thread-C type

YJT 1027 - 2012

Metric triangle lock thread-C type

Metric triangle lock thread-B type

YJT 1028 - 2012

Metric triangle lock thread-B type

Metric triangle lock thread-P type

YJT 1029 - 2012

Metric triangle lock thread-P type

Thread and point details for Type Y thread cutting screws [TABLE 6]

BS 4174 - 1972

Thread and point details for Type Y thread cutting screws [TABLE 6]

Thread and point details for Type A threads [TABLE 23]

BS 4174 - 1972

Thread and point details for Type A threads [TABLE 23]

Screw Threads - UNJ Profile, Inch

SAE AS 8879 - 2001

Screw Threads - UNJ Profile, Inch

Tapping thread for nylon lock

QC /T 713 - 2004

Tapping thread for nylon lock

Screw Threads for Thread Forming Tapping Screws - Dimensions

IS 5957 - 2003

Screw Threads for Thread Forming Tapping Screws - Dimensions

ISO general purpose metric screw threads - General plan

IS 4218 (-2) - 2001

ISO general purpose metric screw threads - General plan

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

ASME B 18.6.3 (T4.3.1-1) - 2024

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

ASME B 18.6.3 (T4.3.2.1) - 2024

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.1-1) - 2024

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.2-1) - 2024

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.4-1) - 2024

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Type AB, Thread Forming Tapping Screws [Table 5]

ASME B 18.6.4 (AB) - 1998 (R2005)

Type AB, Thread Forming Tapping Screws [Table 5]

Type B and BP, Thread Forming Tapping Screws [Table 6]

ASME B 18.6.4 (B/BP) - 1998 (R2005)

Type B and BP, Thread Forming Tapping Screws [Table 6]

Type A, Thread Forming Tapping Screws [Table E1]

ASME B 18.6.4 (A) - 1998 (R2005)

Type A, Thread Forming Tapping Screws [Table E1]

Typ C, Thread Forming Tapping Screws [Table V1]

ASME B 18.6.4 (C) - 1998 (R2005)

Typ C, Thread Forming Tapping Screws [Table V1]

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows